Accidentally ran my CPU at 80 degrees

FireFox · Dec 20, 2014

Jstn7477 said:
'm highly doubtful a CPU can really run at 65F (18c) at idle in normal room temperature.

peche said:
I have been thinking on Delidding it to see if i can reach lower temps…

I have delidded my 3770k and temperatures dropped 20c.

eidairaman1 · Dec 20, 2014

ThE_MaD_ShOt said:
Wcg is my prime95. Lol. It stress the cpu enough as it runs all 8 cores 100%. When I get sometime over the weekend ill run prime95 on it and see where the vCard temps are. I don't anticipate to much difference.

Peche, yes it keeps the cpu below 35c under load. I have to see what the idle temps are. It's like 18 or something.

I'll try and post some screen shots tonight when I get home of idle and load temps.

Yup mine shows cores at 19 idle and 33 for the whole in aida64. Im on Air though with a single fan and a slim cooler

peche · Dec 22, 2014

@Knoxx29 can i ask some questions about Delidding?
im pretty insterested on get naked and replaced TIIM's on mine just to see of my water 3.0 Pro can chill the f*ck out my process a little more ... :peace:

Jborg · Dec 22, 2014

Well apparently on another website(according to 1 guy). Its not good to run an 8350 running at 4.5Ghz in the 60c range for EVEN A FEW MINUTES.

This is obviously false right?

I ran prime for 1.5 hours @ 4.5Ghz and the max Thermal margin was 5c, and the average was around 9c.

So given that, max socket temps were 71c, and max package temps were 65c. All stock voltages.....

I am fine with temps..... I am assuming.

ThE_MaD_ShOt · Dec 22, 2014

Jborg said:
Well apparently on another website(according to 1 guy). Its not good to run an 8350 running at 4.5Ghz in the 60c range for EVEN A FEW MINUTES.

This is obviously false right?

I ran prime for 1.5 hours @ 4.5Ghz and the max Thermal margin was 5c, and the average was around 9c.

So given that, max socket temps were 71c, and max package temps were 65c. All stock voltages.....

I am fine with temps..... I am assuming.

I don't run mine above 55c, lower if I can help it. I had one the hit 62c and shut down. Found my H100 had a bad pump and rma'd it. It's fine now. Once temps went below 60 it was fine, it happens to be my main rig Selene. So I know ti won't run above 62 without issues.

FireFox · Dec 22, 2014

peche said:
@Knoxx29 can i ask some questions about Delidding

Ask.

peche · Dec 22, 2014

here we go with my noob questions… :oops:

when the processor its already delidded and TIM already replaced, HIS should be glued back again?

If it has to be glued again… how do you u paste it back? which product to use?

Devon68 · Dec 22, 2014

My FX 6100 was running 66 and that's the highest it went on a stock cooler. After I upgraded to the hyper 212 I haven't seen temps above 52 but I haven't played anything too demanding lately.

here we go with my noob questions…

when the processor its already delidded and TIM already replaced, HIS should be glued back again?

If it has to be glued again… how do you u paste it back? which product to use?

I wouldn't call that a noob question. I have no idea as well and would like to hear from someone with experience.

Jborg · Dec 22, 2014

ThE_MaD_ShOt said:
I don't run mine above 55c, lower if I can help it. I had one the hit 62c and shut down. Found my H100 had a bad pump and rma'd it. It's fine now. Once temps went below 60 it was fine, it happens to be my main rig Selene. So I know ti won't run above 62 without issues.

I was simply testing for stability at 4.5 Ghz, I didnt change anything but the multiplier.

I know its not good to run above 62c or whatever, but for stability testing purposes for an hour of Prime... I feel these temps are reasonable.

Especially knowing my most demanding CPU program is either going to be BF4, Crysis 3, or Sony Vegas... and I sit in the 40-50c range under load while running these, if not cooler.

peche · Dec 22, 2014

Devon68 said:
My FX 6100 was running 66 and that's the highest it went on a stock cooler. After I upgraded to the hyper 212 I haven't seen temps above 52 but I haven't played anything too demanding lately.

I wouldn't call that a noob question. I have no idea as well and would like to hear from someone with experience.

My biggest doubt it's about IHS, I think It must be glued back to the Processor, but I'm not sure… and I would like to hear about someone that have done it before…

ThE_MaD_ShOt · Dec 22, 2014

peche said:
here we go with my noob questions…

when the processor its already delidded and TIM already replaced, HIS should be glued back again?

If it has to be glued again… how do you u paste it back? which product to use?

I think you can just set it back on without glue as long as you don't move it around. As5 is some sticky shit and works well to adhere it. LOL

FireFox · Dec 22, 2014

peche said:
when the processor its already delidded and TIM already replaced, HIS should be glued back again?

No it doesn't need to be glued back again.

@RCoon recommend: (Just apply a thin layer of CooLab to the actual rectangular die, then put the IHS on top where it was before, put it in the socket and put the clamp down)

Recommended by @RCoon:
The IHS might move around on the die, but as long as you get it right when you put it in the socket and put the clamp thing down and it's central, you're fine to do everything else.

CooLab ultra does not need replacing. You put a thin layer of it between the die and the IHS, and it creates a solid solder-like connection between the two

peche · Dec 22, 2014

@Knoxx29 Thanks dude, that was my biggest question about the process,
also I have heard abot lapping processor ? o polish procesors IHS, that should help a little more?

I would get my Ivy naked on January, I would order Liquid Ultra January's first week and arctic MX2/4 with it, I think I still have arctic silver purifier kit,

Its there any advice or directions to follow for a perfect delid ?

Thanks for all your have dude!
Regards,

FireFox · Dec 22, 2014

peche said:
Its there any advice or directions to follow for a perfect delid ?

I watched a 5 minutes video on YouTube and used something like a razor.(Blade)
MX-4 is the best choice.

This was what I used.

peche · Dec 22, 2014

Big photo,
thanks for the tip....
Are you running it naked ? or using IHS?
By the way i made a post about this topic... http://www.techpowerup.com/forums/threads/stripped-ivy.208248/#post-3211291

Regards,

eidairaman1 · Dec 22, 2014

ThE_MaD_ShOt said:
I don't run mine above 55c, lower if I can help it. I had one the hit 62c and shut down. Found my H100 had a bad pump and rma'd it. It's fine now. Once temps went below 60 it was fine, it happens to be my main rig Selene. So I know ti won't run above 62 without issues.

Mine didnt shut down at 62. Thats odd

ThE_MaD_ShOt · Dec 22, 2014

eidairaman1 said:
Mine didnt shut down at 62. Thats odd

Mine shut down or locked and I had some bsod

FireFox · Dec 22, 2014

peche said:
Are you running it naked ? or using IHS?

I wouldn't be so fool To running it without IHS :slap:

OneMoar · Dec 23, 2014

peche you are gonna end up breaking something I just know it ...

peche · Dec 23, 2014

OneMoar said:
peche you are gonna end up breaking something I just know it ...

i hope i wont... as far as my i7 its a locked one they told me its not worth it to delid it .... so maybe i wont delid it ....but still looking forward to get a cheap ass 3770k ... for delidding it ...

Regards,

Blue-Knight · Dec 23, 2014

Knoxx29 said:
No it doesn't need to be glued back again.

Can it be glued back with hot glue? It is so cheap and popular. :rolleyes:

Knoxx29 said:
I wouldn't be so fool To running it without IHS

Interesting point. Why can't it be run without it?

Wouldn't it be better? Or will I have to test myself!? :confused:

Vario · Dec 28, 2014

Blue-Knight said:
Can it be glued back with hot glue? It is so cheap and popular.

Interesting point. Why can't it be run without it?

Wouldn't it be better? Or will I have to test myself!?

Don't glue it back on
It gets clamped on with the socket retension.

Naked can crack the die. Its hard to get the height correct naked and the gains are miniscule. You can hunt around for a "MSI Delid Die Guard"

Blue-Knight · Dec 29, 2014

Vario said:
Don't glue it back on
It gets clamped on with the socket retension.

Naked can crack the die. Its hard to get the height correct naked and the gains are miniscule. You can hunt around for a "MSI Delid Die Guard"

Thank you, that was some great advice.

Processor	Intel i7 10700K
Motherboard	Asus ROG Maximus XII Hero
Cooling	2x Black Ice Nemesis GTX 480 - 1x Black Ice Nemesis GTX 420 - D5 VPP655P - 13x Corsair LL120 - LL140
Memory	32GB G.SKILL Trident Z RGB 3600Hz
Video Card(s)	EVGA GEFORCE RTX 3080 XC3 Ultra
Storage	Samsung 970 EVO PLUS 500GB/1TB - WD Blue SN550 1TB - 2 X WD Blue 1TB - 3 X WD Black 1TB
Display(s)	Asus ROG PG278QR 2560x1440 144Hz (Overclocked 165Hz )/ Samsung
Case	Corsair Obsidian 1000D
Audio Device(s)	I prefer Gaming-Headset
Power Supply	Enermax MaxTytan 1250W 80+ Titanium
Mouse	Logitech G502 spectrum
Keyboard	Virtuis Advanced Gaming Keyboard ( Batboard )
Software	Windows 10 Enterprise/Windows 10 Pro/Windows 11 Pro
Benchmark Scores	My PC runs FiFA

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

System Name	Athenna
Processor	intel i7 3770 Dellided
Motherboard	GIGABYTE GA-Z68X-UD3H-B3 Rev. 1.1
Cooling	Thermaltake Water 3.0 Pro + Tt Riing12 x2 / Tt ThunderBlade / Gelid Slim 120UV fans
Memory	16GB DRR3 Kingoston with Custom Tt spreaders + HyperX Fan
Video Card(s)	GeForce GTX 980 4GB Nvidia Sample
Storage	Crucial M4 SSD 64GB's / Seagate Barracuda 2TB / Seagate Barracuda 320GB's
Display(s)	22" LG FLATRON 1920 x 1280p
Case	Thermaltake Commander G42 Window
Audio Device(s)	On-board Dolby 5.1+ Kingston HyperX Cloud 1
Power Supply	Themaltake TR2 700W 80plus bronce & APC Pro backup 1000Va
Mouse	Tt eSports Level 10M Rev 1.0 Diamond Black & Tt Conkor "L" mouse pad
Keyboard	Tt eSports KNUCKER
Software	windows 10x64Pro
Benchmark Scores	well I've fried a 775' P4 12 years ago, that counts?

Processor	I5 4690K @ 4.8 Ghz
Motherboard	Gigabyte Z97X Gaming 7
Cooling	Swiftech H140X
Memory	16GB Crucial BallistiX 1866Mhz
Video Card(s)	GTX 1070 G1 Gaming
Storage	850 PRO 1TB SSD, 840 EVO 500GB SSD, 850 EVO 500GB
Display(s)	Nixeus EDG 27-Inch IPS 1440P, 144HZ 16:9
Case	NZXT H440 Red/Black
Power Supply	EVGA Supernova G2 750W
Mouse	G600
Keyboard	G710+
Software	Win 10 64B

System Name	Selene / Yoda
Processor	Fx 8350 @ 4.4 / Phenom II x6 1090t @ 3.6
Motherboard	Gigabyte 990FXA-UD3 r4.0 / Gigabyte 890XA-UD3
Cooling	H100i / Xig Dark Knight
Memory	4x 8gb G.Skill Snipers / 4x 4gb G.Skill Ares
Video Card(s)	Gigabyte R9 290x / XfX DD & VisionTek HD6850's C'fired
Storage	256gb ssd, 2x 2tb Wd Blacks & 1x 1tb Wd black / 1x 1tb
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207
Case	Raidmax Vampire / Chieftec Alum. Dragon Blue
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G500s
Keyboard	Corsair Strafe
Software	Win 10 pro / Win Vista Home prem. 64 bit
Benchmark Scores	What are benchmarks anyway?

Accidentally ran my CPU at 80 degrees

FireFox

The Power Of Intel

eidairaman1

The Exiled Airman

peche

Thermaltake fanboy

Jborg

ThE_MaD_ShOt

FireFox

The Power Of Intel

peche

Thermaltake fanboy

Devon68

Jborg

peche

Thermaltake fanboy

ThE_MaD_ShOt

FireFox

The Power Of Intel

peche

Thermaltake fanboy

FireFox

The Power Of Intel

peche

Thermaltake fanboy

eidairaman1

The Exiled Airman

ThE_MaD_ShOt

FireFox

The Power Of Intel

OneMoar

There is Always Moar

peche

Thermaltake fanboy

Blue-Knight

Vario

Blue-Knight

System Name	Ryzen 2023
Processor	AMD Ryzen 7 7700
Motherboard	Asrock B650E Steel Legend Wifi
Cooling	Noctua NH-D15
Memory	G Skill Flare X5 2x16gb cl32@6000 MHz
Video Card(s)	Sapphire Radeon RX 6950 XT Nitro + gaming Oc
Storage	WESTERN DIGITAL 1TB 64MB 7k SATA600 Blue WD10EZEX, WD Black SN850X 1Tb nvme
Display(s)	LG 27GP850P-B
Case	Corsair 5000D airflow tempered glass
Power Supply	Seasonic Prime GX-850W
Mouse	A4Tech V7M bloody
Keyboard	Genius KB-G255
Software	Windows 10 64bit

System Name	RPC MK2.5
Processor	Ryzen 5800x
Motherboard	Gigabyte Aorus Pro V2
Cooling	Enermax ETX-T50RGB
Memory	CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s)	GIGABYTE RTX 3070 Ti GAMING OC
Storage	ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s)	LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case	Phanteks P300 /w 300A front panel conversion
Audio Device(s)	onboard
Power Supply	SeaSonic Focus+ Platinum 750W
Mouse	Kone burst Pro
Keyboard	EVGA Z15
Software	Windows 11 +startisallback

System Name	BlueKnight
Processor	Intel Celeron G1610 @ 2.60GHz
Motherboard	Gigabyte GA-H61M-S2PH (rev. 1.0)
Memory	1x 4GB DDR3 @ 1333MHz (Kingston KVR13N9S8/4)
Video Card(s)	Onboard
Storage	1x 160GB (Western Digital WD1600AAJS-75M0A0)
Display(s)	1x 20" 1600x900 (PHILIPS 200VW9FBJ/78)
Case	μATX Case (Generic)
Power Supply	300W (Generic)
Software	Debian GNU/Linux 8.7 (jessie)

System Name	Computer of Theseus
Processor	Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard	EVGA Z690 Classified
Cooling	Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory	G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s)	EVGA Geforce 3060 XC Black Gaming 12GB
Storage	1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s)	Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case	Lian Li O11 Air Mini
Audio Device(s)	Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply	Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse	Zowie EC3-C
Keyboard	Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software	Win 10 LTSC 21H2