- Joined
- Oct 5, 2013
- Messages
- 133 (0.03/day)
PROJECT V-3
So, I'm back again and again with a new project.
And again it will be a custom build the entire time I invented and I've never seen so originality is garanted from me 100% you know what I mean .. This project is also apologise from me and I want to prove I'm not a copier.
Unusual water cooling component layout and graphics will not be planted directly into the board, but will be used PCI-E card extension cord and positioned so that the entire visible and it obviously transparent water block.
The whole computer will again be water-cooled using TOP products from the best companies, except for the reservoir - will be custom CNC drilled.
This will be something quite a bit smaller for mATX board, width 300 , length 336 and height 378 .
Again, I wanted to see inside because inside will be good components and it will all be color coordinated, so the choice fell on the side of a piece of clear acrylic.
The main points of the project:
Case built from scratch with an unusual design and layout of components
Custom reservoir in front of the PC, CNC machined from a piece of acrylic.
The rear radiator grill with unconventional due
Completion of the project would see the second half of January, it depends a lot on how much time I have to spend studying and other things. : D
I'm not much for writing, so now the facts about the case and some dimensions of course renders and sponsors.
Material:
Sheet steel
Acrylic
Capacity:
Position 240 for two radiators, bottom max. 45 mm thick
mATX motherboard
Position for one graphics card
Position ATX power supply, D5 pump and reservoir
Components:
Intel i7 4790K
ASUS GENE VII
ASUS GTX780Ti DCII
Be Quiet! Straight Power 10 CM 800
Be Quiet! Silent Wings 2 120 mm
Kingston 3K 240 GB
Kingston HyperX Black Fury 16 GB
And, of course, water cooling components, but about those another day: D
RENDERS
I have long hesitated about color matching of the entire PC, came to me two suggestions:
1.) Green - probably UV water and UV acrylic elements
2.) Red and wide to align with ROG motherboard
So far, I have decided for the red, but I'll see throughout the building, if it still will not change. : D
SPONSORS
Again I must mention great companies which supports me and believe in me. Thanks!
http://www.asus.cz
ASUS Maximus VII GENE
ASUS GTX780Ti DCII
http://www.aquatuning.de
ALPHACOOL NexXxoS XT45 Full Copper 240 mm
ALPHACOOL NexXxoS UT60 Full Copper 240 mm
ALPHACOOL VPP655 - single edition
http://www.bitspower.com
The complete water cooling - blocks, fittings
TOP for the pump
Mod Kit for D5 pump
http://www.kingston.com
HyperX SSD 3k 240 GB
HyperX RAM 16GB Black Fury
http://www.bequiet.com
6x Silent Wings 2 120 mm
Power 850W Zone
http://www.icemodz.com
Sleeving, cabling
http://www.plexi.cz
Czech company MK Plexi
They will support acrylic for reservoir
Well, it would probably suffice for today Even here last picture, the current Progress. More to come very soon.
So, I'm back again and again with a new project.
And again it will be a custom build the entire time I invented and I've never seen so originality is garanted from me 100% you know what I mean .. This project is also apologise from me and I want to prove I'm not a copier.
Unusual water cooling component layout and graphics will not be planted directly into the board, but will be used PCI-E card extension cord and positioned so that the entire visible and it obviously transparent water block.
The whole computer will again be water-cooled using TOP products from the best companies, except for the reservoir - will be custom CNC drilled.
This will be something quite a bit smaller for mATX board, width 300 , length 336 and height 378 .
Again, I wanted to see inside because inside will be good components and it will all be color coordinated, so the choice fell on the side of a piece of clear acrylic.
The main points of the project:
Case built from scratch with an unusual design and layout of components
Custom reservoir in front of the PC, CNC machined from a piece of acrylic.
The rear radiator grill with unconventional due
Completion of the project would see the second half of January, it depends a lot on how much time I have to spend studying and other things. : D
I'm not much for writing, so now the facts about the case and some dimensions of course renders and sponsors.
Material:
Sheet steel
Acrylic
Capacity:
Position 240 for two radiators, bottom max. 45 mm thick
mATX motherboard
Position for one graphics card
Position ATX power supply, D5 pump and reservoir
Components:
Intel i7 4790K
ASUS GENE VII
ASUS GTX780Ti DCII
Be Quiet! Straight Power 10 CM 800
Be Quiet! Silent Wings 2 120 mm
Kingston 3K 240 GB
Kingston HyperX Black Fury 16 GB
And, of course, water cooling components, but about those another day: D
RENDERS
I have long hesitated about color matching of the entire PC, came to me two suggestions:
1.) Green - probably UV water and UV acrylic elements
2.) Red and wide to align with ROG motherboard
So far, I have decided for the red, but I'll see throughout the building, if it still will not change. : D
SPONSORS
Again I must mention great companies which supports me and believe in me. Thanks!
http://www.asus.cz
ASUS Maximus VII GENE
ASUS GTX780Ti DCII
http://www.aquatuning.de
ALPHACOOL NexXxoS XT45 Full Copper 240 mm
ALPHACOOL NexXxoS UT60 Full Copper 240 mm
ALPHACOOL VPP655 - single edition
http://www.bitspower.com
The complete water cooling - blocks, fittings
TOP for the pump
Mod Kit for D5 pump
http://www.kingston.com
HyperX SSD 3k 240 GB
HyperX RAM 16GB Black Fury
http://www.bequiet.com
6x Silent Wings 2 120 mm
Power 850W Zone
http://www.icemodz.com
Sleeving, cabling
http://www.plexi.cz
Czech company MK Plexi
They will support acrylic for reservoir
Well, it would probably suffice for today Even here last picture, the current Progress. More to come very soon.
Last edited: