• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

X1900 Series Overclocking and Feedback thread

Joined
Jan 24, 2006
Messages
444 (0.07/day)
Location
West Chester, Oh
System Name N7
Processor AMD Ryzen 3600
Motherboard Asrock B450 Gaming-ITX
Cooling Custom loop
Memory Gskill F4-3600C16D-16GTZNC
Video Card(s) PowerColor RX6900XT Red Dragon
Storage Intel 545s 256gb, Samsung 840 series 250gb, WD Blue 1tb ssd
Display(s) AOC Q3279VWFD8 1440p
Case Enthoo Evolv mAtx
Audio Device(s) onboard, Steelseries Arctis 3
Power Supply Seasonic GX750
Mouse Corsair M65 Pro
Keyboard HyperX Alloy FPS Pro
Software Windows 10 64 bit
Benchmark Scores Firestrike 21626 Time Spy 8907
I would like to see some overclock numbers from you guys with rev.2 1900 GT's. From what i understand they don't overclock very well.

My card is a rev.2 Sapphire X1900 Gt with stock cooling

I've gone up to 580/810 3Dmark 06 stable and no artifacts, the core temp hit 75c and the ENV temp hit 55c under full 3D load.

How do those numbers sound? Good, bad, normal?

Here is my 3Dmark 06 score. I think its a little low, for my system. What do you guys think?

http://service.futuremark.com/compare?3dm06=1515517



EDIT: Ok, at 590 on the core i got artifacts and at 819 on the memory i got artifacts using ATI tray tools.
 
Last edited:

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.75/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
Its not a terrible score, its around what a X1950Pro gets @ stock.
 
Joined
Sep 21, 2006
Messages
29 (0.00/day)
System Name Asus N81vp
Processor Core 2 duo P8700@3000mhz
Motherboard Asus
Cooling Zalman ZM-NC 1000
Memory 4gb
Video Card(s) HD4650@670mhz gpu/765mhz ram
Storage Intel 320 120gb ssd/320gb@5400rpm
Display(s) Samsung P2470HD/Asus 14"
Case Notebook
Audio Device(s) Realtek HD
Power Supply Asus
Software Windows 8.1 pro 64bit
Benchmark Scores 3D mark 2006@6000
Well this increasigly hot weather is really getting my card to hot for my taste. I have seen it go 95C° while gaming so i had to lower core frequency by some mhz to remain stable.
 

Jodiuh

New Member
Joined
Aug 25, 2005
Messages
28 (0.00/day)
Location
Indy, soon Phoenix
WOW! Shove an HR-03 on there. Hell, the plus variety keeps my 8800GTX under 65C in AZ!
 
Joined
Sep 21, 2006
Messages
29 (0.00/day)
System Name Asus N81vp
Processor Core 2 duo P8700@3000mhz
Motherboard Asus
Cooling Zalman ZM-NC 1000
Memory 4gb
Video Card(s) HD4650@670mhz gpu/765mhz ram
Storage Intel 320 120gb ssd/320gb@5400rpm
Display(s) Samsung P2470HD/Asus 14"
Case Notebook
Audio Device(s) Realtek HD
Power Supply Asus
Software Windows 8.1 pro 64bit
Benchmark Scores 3D mark 2006@6000
Well i want to spend as little as i can on my computer these days and i already have an aftermarket cooler. I gues im going to reaply some thermal paste and add another fan to make it through the summer :cool:
 

Jodiuh

New Member
Joined
Aug 25, 2005
Messages
28 (0.00/day)
Location
Indy, soon Phoenix
Turn up the fan to 100%, listen to loud music. :D
 
Joined
Sep 21, 2006
Messages
29 (0.00/day)
System Name Asus N81vp
Processor Core 2 duo P8700@3000mhz
Motherboard Asus
Cooling Zalman ZM-NC 1000
Memory 4gb
Video Card(s) HD4650@670mhz gpu/765mhz ram
Storage Intel 320 120gb ssd/320gb@5400rpm
Display(s) Samsung P2470HD/Asus 14"
Case Notebook
Audio Device(s) Realtek HD
Power Supply Asus
Software Windows 8.1 pro 64bit
Benchmark Scores 3D mark 2006@6000
I have very silent zalman cooler on it and its on 100%, and i also have a 92 fan blowing from the side. What i need now is one fan to mount it to exaust hot air from the case.
 

dave5991

New Member
Joined
May 28, 2007
Messages
1 (0.00/day)
Location
In the desert,NM
X1900 Gt

My 1900 GT is From 3Dconnect and it is a rev.2 core/memory 513/657.It' fast,sexy, oh and very HOT! Damn 85 c when scaning for artifacts. I use Thermaltake Tidewater CL-W0052. It keeps my card below 65 c at max load. Love it the card with watercooling.Geniunes!!! Now my 1900GT oc very well. Stable at 553/820. wow on the ram. Gets a mark3d 06 of 4363 sm2.0 1686, sm3.0 1839.The big red heatsink/fan on the 1900's look great to bad they don't cool well at all. shame.BTW is it true you can run two X1900 GT's (without a master 1900) in crossfire,but only on a 975X chipset Motherboard?
 

ATijbaroli

New Member
Joined
Feb 25, 2005
Messages
32 (0.00/day)
Location
Buenos Aires, Argentina
Processor Intel Core 2 Duo E4300 @ 3.2 GHz
Motherboard Gigabyte P35-DS3L
Cooling Thermaltake Big Water 735 WC
Memory 2 x 1 GB Supertalent DDR2 850
Video Card(s) HIS HD3850 256 MB TT Waterblock & BIOS vmod
Storage WD1600JB 160 GB, Samsung HD160JJ, WD800BB
Display(s) HP w2207 DVI
Case Cooler Master Mystique 632s
Audio Device(s) SoundBlaster Live! 24 bit 7.1@X-Fire Xtreme Audio
Power Supply Topower 530W-EZ Plug In
Software Windows XP SP2/Ubuntu 7.10
is there any way to raise voltage on the sapp x1950GT? with 0.27 atitool there´s no option to do it.

my temps are (winter) 29° C idle and 37° C full load (AS5 and TT Big Water 735 WC with CPU and VGA block).
 

Digg-

New Member
Joined
Jun 28, 2007
Messages
3 (0.00/day)
HIS x1900GT 256Mb GDDR3 iceQ3

Core: r580 XT2 in ATItool and r580 XL in rabit after dumping bios
Drivers: Omega
Clocks: GPU: Default 573.75
Mem: Default 594.00
GB_PIPE_SELECT: 0x12BB4

GPU Temp(Load Max): 59C


Alrighty. I need some help guys. I'm getting major artifacts in 3d games and on boot. On boot it's pretty much a few pixels dancing around. In games such as CS:S it's graphical anomolies such as a line shooting off from a texture. I even had to lower my Core down to get less artifacts. It seems that I'm running a r580 XL bios on a r580 XT2 core on a x1900gt????? So I'm wondering if I should look for lets say another card with the same memory type which is like Samsung 1.6ns I think..... and a r580 XT2 core. I wanna try that before checking if HIS even put thermal paste on the heatsink. It's probably too late to RMA because it's been sitting on my friend shelf for about a month now.


Here is my RaBiT info:

Version/PN:113-A52022-102

Readed from file: 63488 bytes, ROM len: 63488 bytes
-- Analyze ROM BIOS --
> HEADER offs: 0x20A
> PCIR struct offs: 0x230
> MASTER offs: 0xA986, 34 entries
> SCRIPTS offs: 0xA8EE, 76 entries
> Integrity table offs: 0x255
> CLOCK table offs: 0xAE8E
Core clock is 500.00 MHz
Memory clock is 600.00 MHz
Reference clock is 27.00 MHz
> Connectors Layout table offs: 0xAF58
Port = 0, Conn0 type = DVI-I
Port = 0, Conn2 type = STV
Port = 1, Conn4 type = DVI-I
> TV table offs: 0xAF10
> Hardware table: at 0xB2A0, Rev.2
hw_a: 0x350F, hw_b: 0x0201
> Multimedia table: at 0xB2B4
Product ID: 0x6, Tuner ID: 0x0, Audio Chip ID: 0x1F
Video Decoder ID: 0x66, Video Decoder Config: 0x2
> VESA BIOS Extension 3.00, Rev. 9.12 info:
Vendor: (C) 1988-2005, ATI Technologies Inc.
Product: R580, Rev. 01.00
OEM: ATI ATOMBIOS
Memory size: 256 Mb
> ASIC config:
0x75 = 0x68, 0x74 = 0x41
0x7B = 0x72, 0x7A = 0x4B
> Secure VBIOS details:
Digest: b194c1d463205e7a7921d3d9ea63bf0 (41)
-- ROM BIOS info --
Desc: R580 XL A22 BIOS
Info: 113-A52022-102, S3A52022.102, 03/15/06 17:06
Radeon family: Radeon X1900 series
-- Found hardware registers values: --
> REG(F8): 0x10000000 at 0xBF5D
> RAW_DATA: 0x000C0601 at 0xBA30
> LM63_R4A(0x10) at 0xEA4E
> LM63_R4B(0x16) at 0xE991
> LM63_R4D(0x0B) at 0xE99B
> LM63_R4F(0x03) at 0xE9A5
> LM63_R51(0x06) at 0xE9B8
> LM63_R52(0x46) at 0xE9C2
> LM63_R53(0x07) at 0xE9CC
> LM63_R54(0x50) at 0xE9D6
> LM63_R55(0x08) at 0xE9E0
> LM63_R56(0x58) at 0xE9EA
> LM63_R57(0x0B) at 0xE9F4
> LM63_R58(0x5B) at 0xE9FE
> LM63_R59(0x0C) at 0xEA08
> LM63_R5A(0x5E) at 0xEA12
> LM63_R5B(0x0D) at 0xEA1C
> LM63_R5C(0x61) at 0xEA26
> LM63_R5D(0x0F) at 0xEA30
> LM63_R5E(0x64) at 0xEA3A
> LM63_R5F(0x16) at 0xEA44
> PLL(00): 0x0000126C
> PLL(04): 0x04001068
> MC(08): 0x83004412
> MC(0A): 0x00073B3B
> MC(13): 0x08021CFE at 0xED18
> MC(14): 0x060A04FE at 0xED20
> MC(15): 0x000000FE at 0xED28
> MC(2D): 0x001FF8FE at 0xBDDA
> MC(61): 0x84A4A5FE at 0xED2D
> MC(62): 0x0950C0FE at 0xED35
> MC(63): 0x081117FE at 0xED3D
-- BIOS Image memory timings --
tCL = 09
tRcdRD = 09
tRcdWR = 1E
tRP = 01
tRRD = 0A
tR2W = 0F
MemRR = 3B
tRFC = 01
-- User changes followed --
 

ATijbaroli

New Member
Joined
Feb 25, 2005
Messages
32 (0.00/day)
Location
Buenos Aires, Argentina
Processor Intel Core 2 Duo E4300 @ 3.2 GHz
Motherboard Gigabyte P35-DS3L
Cooling Thermaltake Big Water 735 WC
Memory 2 x 1 GB Supertalent DDR2 850
Video Card(s) HIS HD3850 256 MB TT Waterblock & BIOS vmod
Storage WD1600JB 160 GB, Samsung HD160JJ, WD800BB
Display(s) HP w2207 DVI
Case Cooler Master Mystique 632s
Audio Device(s) SoundBlaster Live! 24 bit 7.1@X-Fire Xtreme Audio
Power Supply Topower 530W-EZ Plug In
Software Windows XP SP2/Ubuntu 7.10
Perhaps there´s some damage on the core, the same happened to my Powercolor X1600 Pro a year ago no OC just gaming.

I tried different BIOS, it even had different PCB from reference so I couldn´t do much thing.
 

Digg-

New Member
Joined
Jun 28, 2007
Messages
3 (0.00/day)
perhaps it's not the best idea to mix amd processors with Nforce and an ati video card lolz :) oh yeah and mac ram from geil :p

ATijbaroli: try using ATI tray tools for o'clocking
 

simsim44

New Member
Joined
Jan 23, 2007
Messages
11 (0.00/day)
Location
Pilesgrove,NJ
Processor AMD X2 4200 AM2@2.53
Motherboard Asus M2R32-MVP
Cooling Titan,Nikita Liquid, 1CPU,2GPU blocks
Memory 2Gb's Corsair PC6400-c4
Video Card(s) 2, Connect3D X1900GT's in Crossfire 641/1440
Storage 2,WD 320's Sata 3.0(SE16)
Display(s) Samsung, Syncmaster 205bw
Case Thermaltake, Tsunami Dream
Audio Device(s) Creative Lab,SB X-Fi XtremeMusic
Power Supply OCZ, GXS600
Software XP-Pro,HL2,HL2E-1,Sin E-1,GRAW,D3-ROE,Q4,FarCry,Stalker
When you guys boot do you get a message that ask to engage Poller, I always click no, the default is yes, I've got 2 connect3D X1900GT's in crossfire and I run them @ 628Mhz core/1440Mhz mem. I double check the volts, I think I'm @1.475. In the game Stalker, I get only 32fps @ 106 F all maxed settings ( I am however water cooled with 3 waterblocks in series with two radiators), does this make any sense here or am I completely lost. I will check volt on my next reboot, although probably won't be for days as this rigs runs pretty much 24/7/365, only down for periodic maintance
 

486DX2

New Member
Joined
Jul 30, 2007
Messages
2 (0.00/day)
overclocking help with HIS X1950pro 512mb agp

Hey guys! I just got the HIS H195PRQT512DDAN-R-V2 Radeon X1950PRO 512MB AGP IceQ 3 Turbo HDCP Video Card from newegg and i was wondering how much more could i overclock it and is it possible to mod it to the XT version.
thanks

Here is what my system are along with the my graphics specs.

DFI Infinity 875P rev.b (not lan party version) socket 478 motherboard
Pentium 4 Extrem Edition 3.4GHZ 512k L2, 2Mb L3
2 gig Dual Channel OCZ Platinum PC-3200 2-3-2-5
HIS 1950pro agp 512mb 590Mhz core / 1.54Ghz memory (HIS factory settings) use to have X850XT agp
120 gig maxtor SATA 150mb/sec 8mb cache 7,200rpm 9.8 averge seek time
LG 1933TR-SF 19" LCD monitor 2ms 3000:1 contrast HDCP/DVI
Dual DVD burners Sony
 

mortal

New Member
Joined
Sep 2, 2006
Messages
151 (0.02/day)
Location
Croatia - Umag
Processor q6600 G0 @ 3400 1,30V
Motherboard DFI LP T2R P35
Cooling Sonic tower @ 40C
Memory 2x1024 Team Elite 4 4 4 12 @ 850mhz
Video Card(s) x1950xtx @ vf-900
Storage Segate 500GB server edition
Display(s) Hanns-g
Case Chieftec LCX Big tower
Audio Device(s) Hercules Muse
Power Supply Silwerstone Strider 560W 12.01-12,04V
First look at the memory chips if they are 1.1ns you can overclocked them to xt. How much you can overclcok, well you tell us, try.

You can make volt mods. You do not need to make changes in bios to xt, you wont unlock any pipeline you will yust raise core and gddr, you can do that normally with creating profile in ati tray tools
 
Joined
Nov 12, 2006
Messages
2,996 (0.47/day)
System Name COLOSSUS-MK4
Processor E8400 @4.4 GHz - FSB @550 MHZ
Motherboard Asus P5K Premium (Black Pearl)
Cooling Xigmatek HDT-S1283
Memory 2x1GB Geil BlckDrgn 800 @1158 5-5-5-18
Video Card(s) 8800GT 512MB @740/1782/2080
Storage Hitachi T7K250 250GB & 7200.10 Seagate 250GB
Display(s) Gateway FPD1975W 19" Widescreen
Case Antec 1200
Audio Device(s) Xi-FI Xtreme Audio
Power Supply CoolerMaster IGreen 500W
Software XP Home SP3
Benchmark Scores SuperPi: 10.563 Sciencemark: 2563.14
OK this is my Max so far- I've got a X1900GT stock speeds of 500/1200, oc'd to 702/1628 I get 5621 3d06 (stick that in your pipe and smoke it X1950Pro's!):rockout: Just imagine what i could get with a C2D.
 

Shadowsword

New Member
Joined
Aug 13, 2007
Messages
4 (0.00/day)
Processor Core 2 Duo E6400 @ 3.2Ghz
Motherboard Intel D975XBX
Cooling Aerocool X-Dominator + 4 120mm fans and 1 200mm fan
Memory 4x512 Corsair XMS2
Video Card(s) PNY 8800GTS @ 675/1100
Storage WD Raptor 74GB + 2x WD Caviar 250GB
Display(s) Old 19" CRT
Case Antec 900
Audio Device(s) Razer Barracuda AC-1
Power Supply Rosewill 550W :(
Software Modified Windows XP MCE
I used to have a X1900AIW. I've gotten it up to 750 core with a voltage increase in ATI tool. At that speed, it would hit 75C during artifact scan. I didn't usually leave it that high. The memory didn't overclock very well on my card though, could only get it to 550. Don't remember my 3D mark '06 score though, I think it was around 6250.
 
Last edited:

ATijbaroli

New Member
Joined
Feb 25, 2005
Messages
32 (0.00/day)
Location
Buenos Aires, Argentina
Processor Intel Core 2 Duo E4300 @ 3.2 GHz
Motherboard Gigabyte P35-DS3L
Cooling Thermaltake Big Water 735 WC
Memory 2 x 1 GB Supertalent DDR2 850
Video Card(s) HIS HD3850 256 MB TT Waterblock & BIOS vmod
Storage WD1600JB 160 GB, Samsung HD160JJ, WD800BB
Display(s) HP w2207 DVI
Case Cooler Master Mystique 632s
Audio Device(s) SoundBlaster Live! 24 bit 7.1@X-Fire Xtreme Audio
Power Supply Topower 530W-EZ Plug In
Software Windows XP SP2/Ubuntu 7.10
I´m trying to OC x1950GT from Sapphire but even at 540 MHz core the computer randomly freezes, and got stability and BSOD withy many games (test drive Unlimited, FSX, rFactor...) using 7.6 catalyst drivers, also partition corruption (thanks god Norton Ghosts exists :p)

Any help would be appreciated :D
 
Joined
Aug 22, 2007
Messages
3,450 (0.57/day)
Location
CA, US
System Name :)
Processor Intel 13700k
Motherboard Gigabyte z790 UD AC
Cooling Noctua NH-D15
Memory 64GB GSKILL DDR5
Video Card(s) Gigabyte RTX 4090 Gaming OC
Storage 960GB Optane 905P U.2 SSD + 4TB PCIe4 U.2 SSD
Display(s) Alienware AW3423DW 175Hz QD-OLED + Nixeus 27" IPS 1440p 144Hz
Case Fractal Design Torrent
Audio Device(s) MOTU M4 - JBL 305P MKII w/2x JL Audio 10 Sealed --- X-Fi Titanium HD - Presonus Eris E5 - JBL 4412
Power Supply Silverstone 1000W
Mouse Roccat Kain 122 AIMO
Keyboard KBD67 Lite / Mammoth75
VR HMD Reverb G2 V2
Software Win 11 Pro
wow that's wierd i've got the sapp x1950gt 256 agp version and i can oc to 648/816
 
D

Deleted member 24505

Guest
heres what ati overdrive auto detects for max on my 1950 pro,i know the core will go higher,so is there a way to raise the max core on overdrive program?



i have had a few problems using ati tool on vista,so i thought i'd try overdrive.this ups my ram to 796,in ati tool,it locks up if i even put the ram to 700.
 
Last edited by a moderator:

georges

New Member
Joined
Sep 16, 2007
Messages
19 (0.00/day)
Processor AMD64 X2 6000
Motherboard GIGA-BYTE GA-M570 SLI
Cooling GIGABYTE 3D ROCLET 2 /5 CASE GANS
Memory 2 GIG CRUCIAL BALLISTIX DDR2800 PC 6400
Video Card(s) GECUBE X1950XT PCI-E
Storage 2X 250GB RAID 0 2X 80GB RAID 0
Display(s) VIEWSONIC OPTIQUEST 20 LCD WIDESCREEN
Case APEVIA XCRUISER
Audio Device(s) REALTEK HD
Power Supply E POWER ZU 550W
Software XP PRO SP2/ VISTA64 HOME PREMIUM
ok i'ma do this tonight.... but what are these values an where is voltage in atitool.27??????
2.121V MVDDC
2.121V MVDDQ
1.498V VCDDI
 

Namslas90

New Member
Joined
Aug 27, 2006
Messages
4,846 (0.75/day)
Location
Earth
ok i'ma do this tonight.... but what are these values an where is voltage in atitool.27??????
2.121V MVDDC
2.121V MVDDQ
1.498V VCDDI

MVDDC is the Memory Voltage.
MVDDQ is the Memory output buffer voltage.
VDDCI is an aditional core voltage sometimes reffered to as the "3D mode - core voltage"

Normally MVDDQ should be less than or equal to MVDDC.

In ATI Tool, click the button in the bottom right corner labled "SETTINGS".
Move cursor back to top scroll bar, click down arrow and select "Voltages".

Don't fry your card!!

:toast:
 

georges

New Member
Joined
Sep 16, 2007
Messages
19 (0.00/day)
Processor AMD64 X2 6000
Motherboard GIGA-BYTE GA-M570 SLI
Cooling GIGABYTE 3D ROCLET 2 /5 CASE GANS
Memory 2 GIG CRUCIAL BALLISTIX DDR2800 PC 6400
Video Card(s) GECUBE X1950XT PCI-E
Storage 2X 250GB RAID 0 2X 80GB RAID 0
Display(s) VIEWSONIC OPTIQUEST 20 LCD WIDESCREEN
Case APEVIA XCRUISER
Audio Device(s) REALTEK HD
Power Supply E POWER ZU 550W
Software XP PRO SP2/ VISTA64 HOME PREMIUM
hmm.. i dont see voltages in .27 or .26. and .26 doesnt have fan control for x1950xt?? i know it did on my x850xt wtf?
also i have 3 profiles in rabit editor
default
499core
600 mem
1.15 v
tmax 140????????? u gotta be shitting me

profile1
same as above with tmax of 120 lol

profile2 i am guessing 3d overdrive
621core
702 mem 1404 effective
1.4v
tmax 105 so much colder!!! lol
which one should i edit in rabit for fan settings? and what is some good voltages if you guys know for x1950 xt from gecube with coolermaster aftermarketcooler and a truckload of heatsinks??
 

PAPADOC

New Member
Joined
Sep 5, 2006
Messages
60 (0.01/day)
System Name VENOM
Processor AMD Phenom X6 1045T @ 4GHz
Motherboard ASUS M5A97 R2.0
Cooling Thermalright Ultra-120 Extreme (with Noctua NF-S12B FLX fan - N.A.)
Memory Kingston KHX1600C10D3B1K2/16G 16GB Kit 2X8GB 1600MHz
Video Card(s) Radeon XFX HD 4890 w/ HR-03 GT + Noctua NF-B9 fan - L.N.A.)
Storage Seagate 500GB SATA2 16MB Cache
Display(s) BenQ 24" FP241VW LCD HDMI
Case Cooler Master HAF X
Audio Device(s) Creative Audigy 2ZS
Power Supply Corsair AX850 GOLD
Software Windows 7 64bit
ATI Overdrive

Trigger69, I don't think there is any way to raise the potential overclock numbers in ATI overdrive , you can only go as high as what numbers are listed in overdrive.

I had the same issue with my X1900GT, that is why i use ATI Tool.

And I know Vista is iffy, that is why I'm still using XP.
 
Top