12 Angry Men SPIDER WEB CASE

[arg-ist]

Hi

I'm here again after a long illness vacation.
My SAK SAK 800D CASE was completed.
http://www.techpowerup.com/forums/t...-and-copper-pipe-and-acrylic-midplate.208434/
Final Photos of MAC G5 CASE are comng soon.
http://www.techpowerup.com/forums/threads/mac-g5-mod-arg-ist.207513/
And it is time to begin with a new Mod.


12 Angry Men SPIDER WEB Case

Again a 900D case… A nice case but with some with some shortcomings and errors. I do not know how many 900D case it was.

With the theme SPIDER WEB CASE.

A1-

A2-

A3-

A4-

A5-

A6-

A7-

A8-

materials used at this case


CASE : Corsair 900D
D2

MB : Asus Rampage 5 extreme
D 10

CPU: İNTEL 5820 K
D14

RAM: CORSAIR DOMİNATOR PLATİNUM 4X8GB 3000
D13

VIDEO CARD :Evga 980 Classified

D8

D9

WATERCOOLING PARTS

RADIATORS: Alphacool UT60 480
Alphacool Monsta 480
D1

WB: EK


FITTINGS:

Mat black Enchace 90 Dual Multilink Adapter
F10 A

Mat black Enhance Multi-link for Acrylic OD 12mm
F10 B

Mat black Enhance Rotary 90 Multilink Adapter
F10 C

RESERVOIR : Bitspower Z Multi 250
F8A

POMP : Swiftech MCP 655
D6

MOD KIT: Bitspower D5
D12

INLINE TEMP. SENSOR:Aqua computer
D11

FANS: 4x Corsair SP 120 Perf. Edition
4x Corsair SP 120 LED-kırmızı
3x Corsair AF 120


PSU: Corsair AX 1200İ
D3

SSD: OCZ VERTEX 4 Sata III 512 GB
D4

SOUND CARD: ASUS Sound Blaster SBX
D7

FAN CONTROLLER : Lamptron CW 611
D5

Don t be angry , Mod photos are coming soon. arg-ist



OTHER WORKLOGS


SAK SAK 800D CASE completed.
http://www.techpowerup.com/forums/t...-and-copper-pipe-and-acrylic-midplate.208434/

MAC G5 CASE
http://www.techpowerup.com/forums/threads/mac-g5-mod-arg-ist.207513/


PLAYDOH SILVERSTONE TJ07 (Acrylic pipe and midplate)
http://www.techpowerup.com/forums/threads/playdoh-silverstone-tj07-acrylic-tubing.206894/


TRANSFORMER CASE COMPLETED
http://www.techpowerup.com/forums/threads/transformer.204111/


Jumbo case- custom build- COMPLETED
http://www.techpowerup.com/forums/threads/jumbo-case-custom-build.205943/


4 way HDD switcher. COMPLETED
http://www.techpowerup.com/forums/threads/4-way-hdd-switcher.203795/


Grapich Equaliser display COMPLETED
http://www.techpowerup.com/forums/threads/graphic-equaliser-display.203871/


900 D MMT CASE COMPLETED
http://www.techpowerup.com/forums/threads/900-d-mmt-case.204028/


12 Angry Men 900 D Case COMPLETED
http://www.techpowerup.com/forums/threads/12-angry-men-900-d-case.203915/

 

[arg-ist]

Again a 900D, and again still known watercool installation problems at 900D...

I say always… 900D is a lizard with severed tail . This time, I'll cut it.

it is very diffucult to put a 480 rad in the subdivision.

And do not even think of putting a 480 Monsta at the sub.

Only a HAMSTER can walk in narrow corridors.

E1

If you use a 480 Monsta ,the distance between RAD and PSU is only 15 mm ,and a ¾ OD tube is 19mm... Not enough place for fittings and for tubing.

And do not even think of putting a 480 Monsta as push pull at the sub.

I f you use 60 mm thick rad too , it is very diffucult to mount fittings and tubing expecially ¾ tubes

E2

We must turn the radiator 180 degree , to use fittings at the front side panel…to escape from the pressure of PSU.

and you have a mini problem…

There are 3 fans mounted at the front panel.

B1

Becouse they are mounted at the inside of the front panel ,there is no place for the radiator tanks..

B2

you must remove the fan, or you mount it to the outside.

I removed the fan

B3

I said; the designers have thought a solutione to mount the fans at the outside…

something that… has not even come to mind of the designers.

I made a simple adapter to this place , ı mounted the fan to the outside

B5-B6-B7

You can use the fan filter , and you can close the front door.

I have 25mm more place to mount the rad, place fort he tanks…

B10-

B11

Front filter and front door can be used as seamless .

A1

 

[arg-ist]

to cover the backside of the case, to keep out this image from the eyes…

C7

I made a backplate Number 2 at photo C10

C13

The most problematic place of 900D , if you don t want to see this

C14

I decided to make an acrylic midplte with waterway. I made a tray from alu, for acrylic midplate.

C15

Tray leveled

C16

And mounted

C17

The center of the plate was poured


C19

-C20

All parts have been grinded

C21

Al parts painted.

F5

 

[arg-ist]

Another problem at 900D is, the design error, at the rad fans…

If you mount the rad with original mounting brackets , 1/5 of the fans are masked from the brackets and from the door.

R1

If you use led fans , it looks very bad out.

To fix it , ı made a new rad bracket . to compare the old ones(black) the new ones.

R6

I lowered down the rad 15 mm.

R2

You can see full size of the fans.

R4

R5

Brackets sent to powder coating.

 

[arg-ist]

respecting the owner's request , ı used 90 angel fittings at corners .

Connections to the rad

F11

F12

F13

Connections to the CPU and MB

F14

F15

F16

And mounting reservoir and pomp without clamps and brackets..

F19

F17

Connections to Video card and self made Spider Web in the corner.

F20

 

[arg-ist]

After connectons with acrylic tubing , pipe joints were detected on the acrylic midd plate .


F22

Water chanels added.


F23

After a little work


F24

Drawn at corel for laser cutting


F25

acrylic plates came , from laser cutting

10mm thick midplate, with waterchanels , was cut 16mm smaler than the others,

to make a chanel for led strip.


the bottom plate is White , it can be lit from below in addition


F29

Akrilik plates


F28

I said I would mount reservoir and pump on acrylic tubes like spider legs.

I put them on midplate plate for trial .


F30

F31

F32

F33

F34

And as well came, bonding acrylic plates.

 

[Random Murderer]

Subbing for an epic build!

 

[arg-ist]

We have 4 sheet Plexi for bonding.
F28

The 10 mm thick clear middle layer with water channels, was bonded with 5 mm clear topsheet.
Y2

tapping and preparing for fittings
Y1

The10 mmthick midplate is 16 mm smaller then 5mm acrylics.
Y3

First leak test with green fluid.
Y5

There is no leak problem. We cann bond third layer.
Second leak test with blue fluid.and no leak problem
Y6

To see the results slightly, curiously.
Y7

Round ,8mmX10mm chanel for led strip.
F29

This channel was wrapped round with RGB led strip.
Y11

And at last… pressure test
Y10

PASSED.

 

[arg-ist]

Although 900 D is a big case , but subdivision too cramped.
U1

One small problem of the case is mounting of the PSU and and work on them.
U2

Only the bottompart of the Rad mounting plate (at back side)is portable. upper part is fixed.can not be romoved.
U4

To be a little more comfortable in the PSU mounting and mounting of PSU connectors ,
I made a mounting plate to install PSU. As I was accustomed from SilverStone TJ 07. Cosmos II
U7

U13- U14

I cut the mounting location of PSU.
U6

Made a mounting plate from 2mm thick alu.
U8

So that, I can mount PSU without tilting and wriggling…

U15

U9

And ı cann take out the PSU without disassembling back rad.
PSU with mounting plate
U10

Pushing the PSU in the case ,backplate with PSU , mounted to the case with four self-tapping screws.
U11

I'm pulling out the PSU and can mount easily PSU connectors.

With adding a frame from 10x15 mm box profile to the backplate , can I mount , an additional 360mm rad to the bottom part of the case ,if it is necessary.

Mounting plate sent to powder coating.

 

[Arjai]

Nice!!

 

[arg-ist]

I am also curious as you are for the result. I want to see midplate with color.
I could not wait .

I photographed , before filling colored liquid , with clear liquid and RGB led light.

1 red led

2 green led

3 blue led

4 yellow led

5 white led

6 light blue led

7 orange led

And then with selected fluid MAYHEM X1 Blood red .
.8mayhemX1

a short break
2 Weeks late summer holiday at Fethiye /TURKEY , to watercool my self

http://imagizer.imageshack.us/v2/1280x1024q90/674/bP4pmH.jpg

 

[arg-ist]

Holiday is over, continue to work

Worklog of this week.( It's hard work after the holiday…)


Step by step final assembly.

Empty case

R1

First montage of the pipe from pomp to 480 rad.

R2

From MB block to monsta 480

R3

Montage of EVGA 980 Classified Hydrocopper

İn and out pipes of Evga 980

R4

Montage of reservoir without montage bracket like a tower.

R5

Montage of pomp on 3 feet, without montage bracket.

R6

R7

R8

R8a

And at last self made SPIDER WEB GRIL

With 5K Potansiometer as dimmer.

R9

R10

R11

Spider web grill backlighted with led strip and with a dimmer.

R12

Case illuminated with led without fluid, to see th effect and to predict the result.

R13

R14

 

[patrico]

ohhh nice job there very nice

 

[arg-ist]

Because I have changed my house , ı could not add final photos.Sorry.
Some final photos

Although I think the pump to work properly upsidedown.

but I changed pumps position not to risk the pump

Thanks for warning TheL4mka Multimodder.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

19

20

21

22

23

24

25

26