Hi guys, I have some issues with my watercooled build. I just finished it a couple of days ago.
I hope you have some feedback or input on the build. I have scratched my head with this for too long so that I may have tunnelvision.
Together with an Alphacool ST30 at the top and an Alphacool 360 Monsta in the front. Both of these radiators are running a push configuration with a total of six Scythe Gentle Typhoon 1450 rpm.
The pump is a D5 set to 3. The loop goes Res/Pump -> GPU -> ST30 -> CPU -> Monsta -> Res/Pump
My ambient temperature is in the 20-25C range. The processor stays relatively cool, with temps around 60-65C which was what I expected. But the graphics card on the other hand, gets really hot. Just above 80C during heavy gaming/load at 1456/8000.
I have double checked the fitting of the block and the fit seems good.
I can supply a picture of the build if needed.
I hope you have some feedback or input on the build. I have scratched my head with this for too long so that I may have tunnelvision.
- NZXT H630
- 4960X 4.5Ghz - 1.25V EKWB Evo Supremacy X99
- Asus Rampage IV Black Edition
- EVGA 980 Ti Classified - EKWB 780 Classified
Together with an Alphacool ST30 at the top and an Alphacool 360 Monsta in the front. Both of these radiators are running a push configuration with a total of six Scythe Gentle Typhoon 1450 rpm.
The pump is a D5 set to 3. The loop goes Res/Pump -> GPU -> ST30 -> CPU -> Monsta -> Res/Pump
My ambient temperature is in the 20-25C range. The processor stays relatively cool, with temps around 60-65C which was what I expected. But the graphics card on the other hand, gets really hot. Just above 80C during heavy gaming/load at 1456/8000.
I have double checked the fitting of the block and the fit seems good.
I can supply a picture of the build if needed.