- Joined
- Apr 7, 2009
- Messages
- 347 (0.06/day)
- Location
- Valencia, Venezuela
System Name | Tropicaliente | Digger | A515-43-R19L |
---|---|
Processor | FX-6300 | Q6600 | R3 3200U |
Motherboard | ASRock 970 Extreme 4 | Gigabyte X48T-DQ6 | Grumpy_PK |
Cooling | EVGA CLC120 | OCZ Vendetta | Stock |
Memory | 16GB DDR3-1600 | 8GB DDR3-1333 | 16GB DDR4-2666 |
Video Card(s) | PowerColor RX-570 4GB Red Dragon | HIS HD5670 1GB IceQ | Vega 3 |
Storage | 256GB SSD (OS) + 512GB SSD (Games) + 500GB + 2TB + 4TB | 80GB + 320GB | 128GB NVME + 512GB SSD |
Display(s) | Asus VN247H-P | KVM USB Switch | 15.6" FHD |
Case | Antec ONE | Generic Black |
Audio Device(s) | on board + Logitech Z623 | on board | on board |
Power Supply | Cooler Master GX-650 | Antec VP-450 | Powerbrick ac/dc |
Mouse | MS Wired Desktop 600 |
Keyboard | MS Wired Desktop 600 |
Software | Win 10 x64 Pro | XCP-ng 8.1: XOA, pfSense, RouterOS, FreeNAS, Zabbix | Win 10 x64 Home |
Hi there...
I have 2 ISP's at home. So, I have one DSL modem (isp1), one Cable modem (isp2), two routers (one for each modem) and both routers are connected between themselves with utp cable.
Router 1 with DSL modem.
ip: 192.168.1.1
msk: 255.255.255.0
dhcp enable
Router 2 with Cable modem
ip: 192.168.1.2
msk: 255.255.255.0
dhcp disable
This way some devices use isp1 and others use isp2 and all they are in the same local network.
My pc uses router 2 so its gw is 192.168.1.2 and I can access cable modem settings just typing 192.168.100.1, and of course if you want to get into dsl modem must set 192.168.1.2 as your gw.
The problem (well is not really a problem) just a little bothersome to do.
If I want to enter into dsl modem settings, then I must to connect the modem directly to any pc without using a router, and fix network card settings to...
ip: 192.168.1.xxx
msk: 255.255.255.0
gw: 192.168.1.1
and type 192.168.1.1 to finally get into dsl modem settings.
Is there any way to get into modem settings, keeping the modem connected to the router 1?
I tryied changing the router 1 ip address to 192.168.1.3 but unsuccessfully.
Must I try changing the netowork range to 192.168.0.X ?
Maybe try another network class?
Any advice/sugestion is always welcome.
Thanks in advance.-
I have 2 ISP's at home. So, I have one DSL modem (isp1), one Cable modem (isp2), two routers (one for each modem) and both routers are connected between themselves with utp cable.
Router 1 with DSL modem.
ip: 192.168.1.1
msk: 255.255.255.0
dhcp enable
Router 2 with Cable modem
ip: 192.168.1.2
msk: 255.255.255.0
dhcp disable
This way some devices use isp1 and others use isp2 and all they are in the same local network.
My pc uses router 2 so its gw is 192.168.1.2 and I can access cable modem settings just typing 192.168.100.1, and of course if you want to get into dsl modem must set 192.168.1.2 as your gw.
The problem (well is not really a problem) just a little bothersome to do.
If I want to enter into dsl modem settings, then I must to connect the modem directly to any pc without using a router, and fix network card settings to...
ip: 192.168.1.xxx
msk: 255.255.255.0
gw: 192.168.1.1
and type 192.168.1.1 to finally get into dsl modem settings.
Is there any way to get into modem settings, keeping the modem connected to the router 1?
I tryied changing the router 1 ip address to 192.168.1.3 but unsuccessfully.
Must I try changing the netowork range to 192.168.0.X ?
Maybe try another network class?
Any advice/sugestion is always welcome.
Thanks in advance.-