• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

HELP - A transistor burnt out on my mobo!

Joined
Apr 28, 2007
Messages
1,193 (0.19/day)
Location
Bellevue, WA
System Name 0BL1V10N
Processor Intel Core i7 11700K @ 5.1GHz all-core turbo
Motherboard ASRock Z590 Taichi
Cooling Cooler Master MasterLiquid 360 (with stock CM fans), 12x Pccooler Moonlight Series ARGB 120mm fans
Memory (4x16GB) 64GB Mushkin Redline Lumina 3600MHz 16-19-19-39 XMP
Video Card(s) MSI RTX 4090 SUPRIM LIQUID 24G (not using stock fans) (+150MHz core, +1000MHz memory)
Storage Western Digital Black SN850X 2TB Gen4 NVMe
Display(s) 1x Alienware AW3821DW (3840x1600@144Hz), 2x Dell SE2717H (1080p@75Hz)
Case Phanteks Enthoo 719 Anthracite Grey
Audio Device(s) Schiit Modius + Drop THX AAA 789 + Custom Planar Magnetic Headphones
Power Supply Thermaltake Toughpower GF3 1200W (12VHPWR)
Mouse Logitech G502 X Plus
Keyboard Too many custom mechanical builds to list...
Software Windows 10 Pro 22H2
I have a ASUS P5AD2 Premium and I think my power supply went nuts cause I turned on my computer and heard a high pitched noise and then this part on my motherboard sparked.

The computer still operates but not normally, the high pitched noise comes from the power supply still and the 3.3v and 5v rails are BOTH sitting at around 1.45v...

Now heres where it gets weird, the mobo still works, surf the web, play a movie, play Oblivion etc just fine. Run Orthos and it instantly fails.

I found a stock image of the mobo and circled which part is burnt out:

http://www.joshuahenryproductions.com/stuff/asus_p5ad2_premium_fried.jpg

If anyone knows where I can get a replacement, like which model transistor that is (I think its a transistor anyways) I'd be very happy. Or if someone wants to buy it for cheap ($35) and tinker with it, the board is fine except for that one thing.
 

WarEagleAU

Bird of Prey
Joined
Jul 9, 2006
Messages
10,812 (1.66/day)
Location
Gurley, AL
System Name Pandemic 2020
Processor AMD Ryzen 5 "Gen 2" 2600X
Motherboard AsRock X470 Killer Promontory
Cooling CoolerMaster 240 RGB Master Cooler (Newegg Eggxpert)
Memory 32 GB Geil EVO Portenza DDR4 3200 MHz
Video Card(s) ASUS Radeon RX 580 DirectX 12 DUAL-RX580-O8G 8GB 256-Bit GDDR5 HDCP Ready CrossFireX Support Video C
Storage WD 250 M.2, Corsair P500 M.2, OCZ Trion 500, WD Black 1TB, Assorted others.
Display(s) ASUS MG24UQ Gaming Monitor - 23.6" 4K UHD (3840x2160) , IPS, Adaptive Sync, DisplayWidget
Case Fractal Define R6 C
Audio Device(s) Realtek 5.1 Onboard
Power Supply Corsair RMX 850 Platinum PSU (Newegg Eggxpert)
Mouse Razer Death Adder
Keyboard Corsair K95 Mechanical & Corsair K65 Wired, Wireless, Bluetooth)
Software Windows 10 Pro x64
Id see if you can contact Asus and RMA it. also, with that PSU its odd that its squeeling.
 

kwchang007

New Member
Joined
Jan 27, 2007
Messages
3,962 (0.63/day)
Location
Severn, MD, USA.
Processor C2D T7200@2 ghz vcore: .9875
Motherboard generic laptop board
Cooling fan control and antec notebook cooler
Memory 2 GBs@ 533 mhz ddr2
Video Card(s) x1400 mobile, overclocked: 526mhz core/ 882mhz ddr
Storage 120 GB@ 5400 rpm fujitsu
Display(s) 15.4" 1440x900
Audio Device(s) integrated
Software vista 32 bit home premium
I have a ASUS P5AD2 Premium and I think my power supply went nuts cause I turned on my computer and heard a high pitched noise and then this part on my motherboard sparked.

The computer still operates but not normally, the high pitched noise comes from the power supply still and the 3.3v and 5v rails are BOTH sitting at around 1.45v...

Now heres where it gets weird, the mobo still works, surf the web, play a movie, play Oblivion etc just fine. Run Orthos and it instantly fails.

I found a stock image of the mobo and circled which part is burnt out:

http://www.joshuahenryproductions.com/stuff/asus_p5ad2_premium_fried.jpg

If anyone knows where I can get a replacement, like which model transistor that is (I think its a transistor anyways) I'd be very happy. Or if someone wants to buy it for cheap ($35) and tinker with it, the board is fine except for that one thing.

idk where you can buy a transistor/resistor, but you should be able to read some stuff on the top, unless the top blew off or something, in that case, good luck finding out what goes there, you'll have to find a schematic. what about RMAing it? oh and the PSU may be squealing because the load on the 3.3 and 5v lines aren't correct, so you may be killing your psu at the same time (that's my guess why it's squealing)
 
Joined
Apr 28, 2007
Messages
1,193 (0.19/day)
Location
Bellevue, WA
System Name 0BL1V10N
Processor Intel Core i7 11700K @ 5.1GHz all-core turbo
Motherboard ASRock Z590 Taichi
Cooling Cooler Master MasterLiquid 360 (with stock CM fans), 12x Pccooler Moonlight Series ARGB 120mm fans
Memory (4x16GB) 64GB Mushkin Redline Lumina 3600MHz 16-19-19-39 XMP
Video Card(s) MSI RTX 4090 SUPRIM LIQUID 24G (not using stock fans) (+150MHz core, +1000MHz memory)
Storage Western Digital Black SN850X 2TB Gen4 NVMe
Display(s) 1x Alienware AW3821DW (3840x1600@144Hz), 2x Dell SE2717H (1080p@75Hz)
Case Phanteks Enthoo 719 Anthracite Grey
Audio Device(s) Schiit Modius + Drop THX AAA 789 + Custom Planar Magnetic Headphones
Power Supply Thermaltake Toughpower GF3 1200W (12VHPWR)
Mouse Logitech G502 X Plus
Keyboard Too many custom mechanical builds to list...
Software Windows 10 Pro 22H2
Sadly the board is way out of its warranty/RMA period, its like 3 years old. Its my secondary gaming rig...

The actual part itself burnt out in the middle, theres like a big crater in the center where the writing used to be.
 

kwchang007

New Member
Joined
Jan 27, 2007
Messages
3,962 (0.63/day)
Location
Severn, MD, USA.
Processor C2D T7200@2 ghz vcore: .9875
Motherboard generic laptop board
Cooling fan control and antec notebook cooler
Memory 2 GBs@ 533 mhz ddr2
Video Card(s) x1400 mobile, overclocked: 526mhz core/ 882mhz ddr
Storage 120 GB@ 5400 rpm fujitsu
Display(s) 15.4" 1440x900
Audio Device(s) integrated
Software vista 32 bit home premium
Sadly the board is way out of its warranty/RMA period, its like 3 years old. Its my secondary gaming rig...

The actual part itself burnt out in the middle, theres like a big crater in the center where the writing used to be.

uh oh that's not good
 

von kain

New Member
Joined
Sep 13, 2006
Messages
780 (0.12/day)
Location
athens/greece
System Name intel-hate
Processor Amd phenom 2 955 @ 3800
Motherboard msi 790fx-gd70
Cooling coolermaster
Memory 4096 @1600 corsair
Video Card(s) sapphire 5770 @950-1350
Storage 1 seagate 80gb sata2 1 160gb seagate sata
Display(s) 20inch wide lg
Power Supply chieftech 750w
Software windows 7 x64
Benchmark Scores nah
why should anyone wanna buy your burned mobo?????


p.s. don't tell to no one alse and sell it on ebay
 

Mediocre

New Member
Joined
Jun 11, 2006
Messages
1,237 (0.19/day)
Processor C2D E8400 @ 3.60GHz
Motherboard ASUS P5Q-Pro w/ extra Vreg HS
Cooling Apogee GTX, 2x120mm DD, MCP-1000P Res/Pump, all 3/8" 7x80mm (4x push/pull, 2x exhaust, 1x side)
Memory 2 x 1GB Corsair Dominator DDR2 1066 @ 800 (4-3-3-6)
Video Card(s) EVGA 9800GTX+
Storage 3 x 80 GB WD SATA300 (2x RAID 0)
Display(s) Scepter x37 1080p 37" LCD & Samsung 204B
Case CoolerMaster HAF932
Audio Device(s) Onboard
Power Supply Mushkin HP-580AP (C/O TPU!)
Software Vista Ultimate (32-bit)
Got another PSU to try? I would GUESS that your PSU maybe fine and that FET is shorting your 5V and 3.3V rails to ground.

Power supplies let out a high pitched squeel when they get shorted...I do it for shits and giggles at work sometimes.

If you try another psu and it still squeels, I would just remove the FET in question and see if the board still works.

My bro burnt one on his asus board when he connected his fan controller (with 4 fans hooked up) into his chassis1 fan connector. Smoked it instantly. Board still works fine, just can't use the chassis 1 connector.

Maybe their is a 3-pin fan connector you're not using? Looks like a different FET though....
 

Verikon

New Member
Joined
Dec 21, 2006
Messages
79 (0.01/day)
Processor AthlonX2 4600+ Windsor @ 2.8GHz
Motherboard Asus M2N-SLI Deluxe
Cooling Zalman CNPS9500 AM2
Memory 2GB G.Skill DDR2-800
Video Card(s) Dual eVGA 7900GTs in SLI
Storage Dual WD 80GB SATA in Raid0
Display(s) Samsung 204BW 22" LCD
Case CoolerMaster Centurion 534+
Audio Device(s) Integrated
Power Supply Enermax Liberty 500W
Software 3DMark06: 8203
I once knocked off a small transistor from the back of a 7800GT, and it ran fine without it. I was able to solder it back on without a problem, but it made me wonder how much redundancy is built into modern computer equipment? I've seen motherboards with oozing blown caps that still powered on. Something to ponder...
 
Joined
Apr 28, 2007
Messages
1,193 (0.19/day)
Location
Bellevue, WA
System Name 0BL1V10N
Processor Intel Core i7 11700K @ 5.1GHz all-core turbo
Motherboard ASRock Z590 Taichi
Cooling Cooler Master MasterLiquid 360 (with stock CM fans), 12x Pccooler Moonlight Series ARGB 120mm fans
Memory (4x16GB) 64GB Mushkin Redline Lumina 3600MHz 16-19-19-39 XMP
Video Card(s) MSI RTX 4090 SUPRIM LIQUID 24G (not using stock fans) (+150MHz core, +1000MHz memory)
Storage Western Digital Black SN850X 2TB Gen4 NVMe
Display(s) 1x Alienware AW3821DW (3840x1600@144Hz), 2x Dell SE2717H (1080p@75Hz)
Case Phanteks Enthoo 719 Anthracite Grey
Audio Device(s) Schiit Modius + Drop THX AAA 789 + Custom Planar Magnetic Headphones
Power Supply Thermaltake Toughpower GF3 1200W (12VHPWR)
Mouse Logitech G502 X Plus
Keyboard Too many custom mechanical builds to list...
Software Windows 10 Pro 22H2
I will try removing it and see what happens, thanks guys. Also assuming I am resourceful enough to find out what model of MOSFET died, if I replace it everything in theory should be okay?

The only reason I care so much is this motherboard, while getting outdated, still goes for $125+ on ebay and has many nice feature sets most new motherboards don't have.
 
Joined
Apr 28, 2007
Messages
1,193 (0.19/day)
Location
Bellevue, WA
System Name 0BL1V10N
Processor Intel Core i7 11700K @ 5.1GHz all-core turbo
Motherboard ASRock Z590 Taichi
Cooling Cooler Master MasterLiquid 360 (with stock CM fans), 12x Pccooler Moonlight Series ARGB 120mm fans
Memory (4x16GB) 64GB Mushkin Redline Lumina 3600MHz 16-19-19-39 XMP
Video Card(s) MSI RTX 4090 SUPRIM LIQUID 24G (not using stock fans) (+150MHz core, +1000MHz memory)
Storage Western Digital Black SN850X 2TB Gen4 NVMe
Display(s) 1x Alienware AW3821DW (3840x1600@144Hz), 2x Dell SE2717H (1080p@75Hz)
Case Phanteks Enthoo 719 Anthracite Grey
Audio Device(s) Schiit Modius + Drop THX AAA 789 + Custom Planar Magnetic Headphones
Power Supply Thermaltake Toughpower GF3 1200W (12VHPWR)
Mouse Logitech G502 X Plus
Keyboard Too many custom mechanical builds to list...
Software Windows 10 Pro 22H2
why should anyone wanna buy your burned mobo?????


p.s. don't tell to no one alse and sell it on ebay

Haha, never know when there is someone crazy enough to fix something like that with about 5min of effort...
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
MOSFETs are quite easy to solder in and out so it's not far fetched at all to sell it to someone capable of repairing it.
The problem is they won't pay you $35 for it...
 

Jonnycat

New Member
Joined
Nov 16, 2006
Messages
330 (0.05/day)
Location
PNW
Maybe that one right next to it is the same type, and you could use that part number to order the new one.
 
Joined
May 6, 2005
Messages
2,792 (0.40/day)
Location
Tre, Suomi Finland
System Name Ladpot ◦◦◦ Desktop
Processor R7 5800H ◦◦◦ i7 4770K, watercooled
Motherboard HP 88D2 ◦◦◦ Asus Z87-C2 Maximus VI Formula
Cooling Mixed gases ◦◦◦ Fuzion V1, MCW60/R2, DDC1/DDCT-01s top, PA120.3, EK200, D12SL-12, liq.metal TIM
Memory 2× 8GB DDR4-3200 ◦◦◦ 2× 8GB Crucial Ballistix Tactical LP DDR3-1600
Video Card(s) RTX 3070 ◦◦◦ heaps of dead GPUs in the garage
Storage Samsung 980 PRO 2TB ◦◦◦ Samsung 840Pro 256@178GB + 4× WD Red 2TB in RAID10 + LaCie Blade Runner 4TB
Display(s) HP ZR30w 30" 2560×1600 (WQXGA) H2-IPS
Case Lian Li PC-A16B
Audio Device(s) Onboard
Power Supply Corsair AX860i
Mouse Logitech MX Master 2S / Contour RollerMouse Red+
Keyboard Logitech Elite Keyboard from 2006 / Contour Balance Keyboard / Logitech diNovo Edge
Software W11 x64 ◦◦◦ W10 x64
Benchmark Scores It does boot up? I think.
It's not very wise to assume the chips are the same...
Usually the partnumber is etched on the MOSFET so I suggest you try to clean the part and maybe use a digital camera with a good macro to find out the part number.
 
Joined
Apr 28, 2007
Messages
1,193 (0.19/day)
Location
Bellevue, WA
System Name 0BL1V10N
Processor Intel Core i7 11700K @ 5.1GHz all-core turbo
Motherboard ASRock Z590 Taichi
Cooling Cooler Master MasterLiquid 360 (with stock CM fans), 12x Pccooler Moonlight Series ARGB 120mm fans
Memory (4x16GB) 64GB Mushkin Redline Lumina 3600MHz 16-19-19-39 XMP
Video Card(s) MSI RTX 4090 SUPRIM LIQUID 24G (not using stock fans) (+150MHz core, +1000MHz memory)
Storage Western Digital Black SN850X 2TB Gen4 NVMe
Display(s) 1x Alienware AW3821DW (3840x1600@144Hz), 2x Dell SE2717H (1080p@75Hz)
Case Phanteks Enthoo 719 Anthracite Grey
Audio Device(s) Schiit Modius + Drop THX AAA 789 + Custom Planar Magnetic Headphones
Power Supply Thermaltake Toughpower GF3 1200W (12VHPWR)
Mouse Logitech G502 X Plus
Keyboard Too many custom mechanical builds to list...
Software Windows 10 Pro 22H2
Yea I can't see the number the middle of the MOSFET is gone, right in the middle of the numbers. I was able to disconnect the two main "legs" of the unit but the top section, the wide base which is soldered on is being more stubborn, I'm thinking my soldering iron isn't hot enough for that.

However since the MOSFET isn't making a complete circuit, I'm not going to bother taking it all off and am just going to test it as is.
 

Demos_sav

New Member
Joined
Aug 26, 2006
Messages
870 (0.13/day)
Location
Cyprus
Processor Intel P4 519K LGA775 3.06GHz @ 3.82GHz
Motherboard ASUS P5WD2
Cooling Arctic Cooling Freezer 7 Pro
Memory 3GB Kingston Hyper-X DDR2 3-4-3-6 @667MHz
Video Card(s) XFX 8800 GTS 320MB XXX Edition @ 630/970
Storage Samsung 160GB SATA2 7200RPM 8MB
Display(s) SONY SDM HS75 17' LCD
Case Interset (black)
Audio Device(s) Realtek HD ALC882 8-channel onboard
Power Supply Thermaltake Toughpower 750W
Software Windows XP Home edition 32bit fully tuned
Benchmark Scores 3dm01-29689 3dm03-31099 3dm05-10298 3dm06-6409
I THINK that is not a tranzistor. I THINK that's a voltage regulator(extremely hard to find):shadedshu
 

Jonnycat

New Member
Joined
Nov 16, 2006
Messages
330 (0.05/day)
Location
PNW
It's not very wise to assume the chips are the same...

Given the choice between guessing the part number out of the blue (OP stated, "The actual part itself burnt out in the middle, theres like a big crater in the center where the writing used to be."), or using the part number of the device next to it, it makes more sense to try going with the part number next o it, hence my suggestion.

Of course, it wouldn't hurt to also look at the circuit traces to give confidence in the assumption that it is the same device as it's neighbor.
 
Last edited:
Top