Armor Fleet DF-71
 

To view this case mod, go here.

http://www.techpowerup.com/gallery/2777/_1.jpg http://www.techpowerup.com/gallery/2777/_2.jpg http://www.techpowerup.com/gallery/2777/_3.jpg http://www.techpowerup.com/gallery/2777/_4.jpg http://www.techpowerup.com/gallery/2777/_5.jpg http://www.techpowerup.com/gallery/2777/_6.jpg http://www.techpowerup.com/gallery/2777/_7.jpg http://www.techpowerup.com/gallery/2777/_8.jpg http://www.techpowerup.com/gallery/2777/_9.jpg http://www.techpowerup.com/gallery/2777/_10.jpg

Specs:
Mobo: 790FXTA-ud5
CPU: 1055T AMD X6
CPU cooler: Scythe mugen rev. 2
VGA: 5850 sapphire & 5850 XFX
RAM: kingmax 1600
PSU: Odin Pro 800wtz
24 pin extension cable, sleeved white
4pcs 6pin extension cable, sleeved white
metal sleeve (i just pic it up in the hardware)
2 UV CCL
1 white CCL
1 red (freebe) CCL

Mods:
This mod is a bit on a budget, I was planning to paint it with 2 tone, blue and pearl white but cant find the pint here...so I went to aluminum polishing.
Some of the other parts came from the old acrylic case. I'm still saving and doing buy and sell to either change case and mod or ill just finish this when i find time...

OC and quick benchmark and stress test:
http://www.youtube.com/watch?v=mWTAMiEtktk

the white paint in side this case looks good ;)

Thanx man... the idea is to bring out the specs inside and to bounce the light when the CCL is on

Any comments i don't mind....
Any ratting will do as this is the only case mod i did with real cutting, mounting, sleeving and cable management

i dont like the feet.

I agree, I was to lazy to fabricate with the acrylic that i have...original idea was to copy the feet of coolermaster 690 case

then you shouldn't have done it anyway.

i need to temporarily elevate the case otherwise the PSU wont get any cool air

even i elevated mine so that my VGA gets more air. but i used normal white plastic feet. :P

I like the design of the feet

nice move from the old school black paint jobs people tend two go for now days
you have well thogth out this paint for this rig ;)

Thanx man but i was thinking of changing it to much more thick 1 just like the 1 used on Coolermater cosmos or ill fabricate 1 like the colermaster 960 but more exaggerated