Project: Steampunk'd TJ11
 

http://i11.photobucket.com/albums/a1...ps833bbcb2.jpg


Time for a good Steampunk mod. And what better case to use than the awesome Silverstone TJ11!


http://i931.photobucket.com/albums/a...J11-34View.jpg

http://i11.photobucket.com/albums/a1...1/DSC02873.jpg

Big shutout to my sponsors!!

http://i11.photobucket.com/albums/a1...cepc-1-rgb.jpg
Performance-PCs is providing me with the BP mod kits, 240 and 360 rads and the Silverstone slim DVD bay.

http://i11.photobucket.com/albums/a1..._logotip_a.jpg
EKWB is providing me with a EK-Multioption 250 Res and 90 degree fittings.

Hardware
Mobo: Asus Sabertooth P67
CPU: Intel i5 2500K
GPU: Unknown
RAM: 16GB Corsair Dominator 1333
SSD: Curcial M4 128 GB
PSU: Silverstone Strider 1200W
Fan Controller: Lamptron FC10

Cooling
XSPC EX480
EK-CoolStream 360
Another 360 rad
EK-Multioption 150 or 250
EK-RAM Dominator
EK-MOSFET Sabertooth P67
EK-Supreme LTX
2x XSPC 120mm radiator stand

Misc
Sleeving: MDPC-X
Yellow SMD LED Strips
Yellow LED bulbs
Sophisticated Finishes Rust Effect Kit
Old Vacuum Tubes


Lets start working! The first thing I did was do some testing with LEDs in the Vacuum tubes. Here is what they look like with an Orange LED in them. Orange is not the final color, yellow is but at the time I didn't have the Yellow LEDs in yet.

http://i11.photobucket.com/albums/a1...1/DSC02492.jpg

http://i11.photobucket.com/albums/a1...1/DSC02497.jpg

http://i11.photobucket.com/albums/a1...1/DSC02498.jpg


Next up was to see how the rust effect paint would workout. First lets try some fan grills.

The Paint
http://i11.photobucket.com/albums/a1...1/DSC02547.jpg

The Grills
http://i11.photobucket.com/albums/a1...1/DSC02541.jpg

Primer and Iron paint
http://i11.photobucket.com/albums/a1...1/DSC02550.jpg

Rust Paint
http://i11.photobucket.com/albums/a1...1/DSC02553.jpg

http://i11.photobucket.com/albums/a1...1/DSC02552.jpg

http://i11.photobucket.com/albums/a1...1/DSC02555.jpg

http://i11.photobucket.com/albums/a1...1/DSC02556.jpg

http://i11.photobucket.com/albums/a1...1/DSC02557.jpg

http://i11.photobucket.com/albums/a1...1/DSC02558.jpg


Since that test was successful I thought I should try an actual piece of the case. The dual PSU bracket seemed like a good test subject.
http://i11.photobucket.com/albums/a1...1/DSC02560.jpg

And the result
http://i11.photobucket.com/albums/a1...1/DSC02751.jpg


I am very confident in the results so I started doing more, but that's in the next update. Stay tuned by subscribing so you can see all the updates!

Cheers till then,

Fuga

The Case
 

Since testing is over its time to start on the case.

http://i11.photobucket.com/albums/a1...1/DSC02881.jpg

Its actually a good thing I'm modding this case because I got it used for pretty cheap. You would never get a good looking build out of this beatup case unless you paint/modify it. There are several screws missing, HDD bays missing and the front bezel was bent. I was able to fix the front bezel mostly and I ordered lots of new screws.

First thing to do is remove all of the buttons, connectors and cables.
http://i11.photobucket.com/albums/a1...1/DSC02882.jpg

Remove the mobo try and fans. I was going to not use the fans but I decided to make a midplate to hide them and that has cutouts for the fans. There will also be some Bitspower passthrough fittings for the tubing.
http://i11.photobucket.com/albums/a1...1/DSC02884.jpg

5.25" bays gone and mobo tray rails are out.
http://i11.photobucket.com/albums/a1...1/DSC02885.jpg

And here it is in pieces.
http://i11.photobucket.com/albums/a1...1/DSC02886.jpg

The first thing to do before you paint is get a nice coat of primer on the parts.
http://i11.photobucket.com/albums/a1...1/DSC02888.jpg

Next I started painting all the parts with the Iron base coat. This actually has iron particles in it which react with the Rust paint.
http://i11.photobucket.com/albums/a1...1/DSC02889.jpg

All the small bits.
http://i11.photobucket.com/albums/a1...1/DSC02891.jpg

And the large ones.
http://i11.photobucket.com/albums/a1...1/DSC02892.jpg

Next is the Rust paint. Its actually not paint. Its a chemical which looks more like blue water but you get the picture.
http://i11.photobucket.com/albums/a1...1/DSC02893.jpg

Just after 1 coat you can see it starting to work.
http://i11.photobucket.com/albums/a1...1/DSC02898.jpg

http://i11.photobucket.com/albums/a1...1/DSC02899.jpg

http://i11.photobucket.com/albums/a1...1/DSC02900.jpg

http://i11.photobucket.com/albums/a1...1/DSC02901.jpg

http://i11.photobucket.com/albums/a1...1/DSC02902.jpg

2-3 coats
http://i11.photobucket.com/albums/a1...1/DSC02903.jpg

http://i11.photobucket.com/albums/a1...1/DSC02904.jpg

5ish coats
http://i11.photobucket.com/albums/a1...1/DSC02905.jpg

http://i11.photobucket.com/albums/a1...1/DSC02906.jpg

And the first coat on the 5.25" bays
http://i11.photobucket.com/albums/a1...1/DSC02907.jpg

It starts the reaction only after maybe 5 minutes after being applied.
http://i11.photobucket.com/albums/a1...1/DSC02908.jpg


Lastly I'll leave you with some of my grill plans. I have a friend who does my laser cutting and he will do up a sick CAD drawing for me and I'll share it with all of you.

I'm going to install the 50mm fan on the motherboard so I need a grill to make it look nice. Also since I am keeping the internal 180mm fans I have to keep the side panel vents. I want to dress them up some otherwise they just look funny.
http://i11.photobucket.com/albums/a1...illDesigns.jpg
His will obviously look better than what I can draw :P


Cheers till next time,

Fuga

Wow subbed, kick ass project.

Sub'ed looking awesome so far

What an original idea (and I'm not being sarcastic!) Progress so far looks amazing, sub'd as well :toast:

LEDs in vaccum tubes, nice touch too.

Hehe thanks!

Thanks!

Thanks. I really wanted to do something no one has done before. Because lets be honest, who is going to rust such a great case?

Subscribed

subbed... I really like the rusty look... great job!:toast:

Thanks guys!

so sweet. steampunk stuff is awesome

Unexpected Results and Modding the Mobo
 

I'm super siked to announce that Performance-PCs.com is sponsoring me with some gear.

http://i11.photobucket.com/albums/a1...cepc-1-rgb.jpg



Now for the unexpected results. I needed to put a clear coat on the rust because it would rub off just like real rust. In doing so the color of the rust went from a orange/red/brown to more of a dark brown. I actually like this color because it looks more like leather. Let me know what you guys think.

Mid plate with clear on it and the mobo tray under it.
http://i11.photobucket.com/albums/a1...1/DSC02909.jpg

http://i11.photobucket.com/albums/a1...1/DSC02910.jpg


I liked it so I keep putting clear coat on the rest of the parts. Here is the mobo tray painted and assembled.
http://i11.photobucket.com/albums/a1...1/DSC02911.jpg

Still has a rust look to it.
http://i11.photobucket.com/albums/a1...1/DSC02912.jpg

And compared to the PSU bracket.
http://i11.photobucket.com/albums/a1...1/DSC02913.jpg

So while I was painting the rest of the parts I decided to start modding the "Thermal Armor" of the mobo.

http://i11.photobucket.com/albums/a1...1/DSC02914.jpg

Tape applied
http://i11.photobucket.com/albums/a1...1/DSC02915.jpg

And marked
http://i11.photobucket.com/albums/a1...1/DSC02916.jpg

And here are the final results. Not sure I'm going to keep the skinny piece between the MOS block and the CPU, it isn't perfectly straight and looks in like its in the way of the design. Not sure yet what I will do.

http://i11.photobucket.com/albums/a1...1/DSC02917.jpg

http://i11.photobucket.com/albums/a1...1/DSC02918.jpg

http://i11.photobucket.com/albums/a1...1/DSC02919.jpg

http://i11.photobucket.com/albums/a1...1/DSC02920.jpg

Not sure how I will paint it but here are a few things I figured out recently.

I'm going to paint all the water blocks gold!
I will paint the 2 ribbed parts of the exterior gold.
The front bezel, back side of the case and side panels will have wood grain vinyl applied.
The Thermal Armor will either be rusted, wood grain or covered in leather!
GPU back plates will be the same as the Thermal Armor.


Things I have ordered:
50mm fan for mobo
EX360 rad
EX240 rad
2x BP MCP655 mod kits
Silverstone Slim DVD Drive bay
Acrylic

Things I need to order
BP Dual D5 Pump top
more Turbine Master fans
EK Uni Brackets for RES
250 Res

Questions, Comments and Recommendations are welcome!

Cheers till next time,

Fuga

Watching this project with my usual anticipation with your projects.

Props for the Sabertooth!:rockout: Love my P67 if the Z77 had a PCI slot I would be all over it(Not willing to let my PCI X-Fi Fatality go just yet)

Subbed of course!

subbed, want to see what u gona do with my fav case

Thanks! This is my 2nd P67 Sabertooth. I really like them.

haha thanks! My favorite too!

Radiator, Sleeving and LEDs
 

I have been debating on weather or not I would paint the radiators or not for a while now. Here is what the unpainted rad looks like with the fans and painted grills.

http://i11.photobucket.com/albums/a1...1/DSC02929.jpg

http://i11.photobucket.com/albums/a1...1/DSC02931.jpg

http://i11.photobucket.com/albums/a1...1/DSC02933.jpg

I didn't like the look so I decided to give the rad a make over.

http://i11.photobucket.com/albums/a1...1/DSC02942.jpg

http://i11.photobucket.com/albums/a1...1/DSC02943.jpg

http://i11.photobucket.com/albums/a1...1/DSC02950.jpg

http://i11.photobucket.com/albums/a1...1/DSC02951.jpg

I'm glad the letters are still legible.

http://i11.photobucket.com/albums/a1...1/DSC02949.jpg

With the fan grills on. These outside ones are just for looks and to protect the fins.

http://i11.photobucket.com/albums/a1...1/DSC02952.jpg

http://i11.photobucket.com/albums/a1...1/DSC02953.jpg

Fans attached.

http://i11.photobucket.com/albums/a1...1/DSC02954.jpg

Black fan grills on the inside fans. I was debating on painting the fans and inside grills but it would be a waste. By not painting them I can easily replace them and not worry about having to repaint them at a later time.

http://i11.photobucket.com/albums/a1...1/DSC02955.jpg

Got my MDPC-X sleeving in. I have no idea what the combo will be yet but I have lots of time to think about it.

http://i11.photobucket.com/albums/a1...1/DSC02936.jpg

The Yellow LEDs finally came in along with the 47 Ohm resistors for them.

http://i11.photobucket.com/albums/a1...1/DSC02944.jpg

I pulled one out right away and started testing with the vacuum tubes.

http://i11.photobucket.com/albums/a1...1/DSC02945.jpg

http://i11.photobucket.com/albums/a1...1/DSC02946.jpg

http://i11.photobucket.com/albums/a1...1/DSC02947.jpg

http://i11.photobucket.com/albums/a1...1/DSC02948.jpg

I know they still look a little bit orange in the photos but they are a really nice amber yellow in person. They will look great with the other LED strips I have.


Now for a bit of sponsor news. I was talking to Bitspower several months ago and all of a sudden, they stopped replying to me. Well just a few days ago they finally wrote back and we are in talks again for parts. I hope to get all my fittings and the pump top from them.

I also finally got EK to bite. I started talking shop with them. Not sure all what they will be providing but I'm hoping for at least GPU blocks since PPCs took care of my radiators.



What's coming next?

I'm going to finish modding the "thermal armor" on the mobo this weekend. I want to get a nice clean fit.

I ordered a few sheets of aluminium to make a sturdy midplate. (There will probably be acrylic on top of it. I have not decided yet)

I need to do more research into "wood veneer". Someone suggested that instead of using vinyl to give the case a more natural look. After looking at the prices, its not much more than the vinyl so I'm thinking hard about it. Here are 2 that I am looking at.

This one is already finished.
http://www.veneersupplies.com/produc...awn-4-x-8.html

This one requires a finish.
http://wiusa.com/curvwood/Library-Fi...__flat_cut.htm


That's it for today. Hopefully I can get some more done this weekend since its a long weekend but there isn't much left to do on the inside. I need to decide/figure out the veneer situation so I can get the outside done. Oh and I'm waiting for gold paint to arrive. Once I get that I can do the water blocks and some of the case exterior.


Cheers till next time,

Fuga

TUBES!!! Awesome man, just awesome. Reminds of my Traynor Tube head I used to play bass thru on stage back in the day.
This Mod just keeps getting cooler!:rockout:

Edit: Of course you need to think about heat with those little buggers. They will burn your fingerprints right off ;)

i want to buy it

Thanks. There will be no heat from the tubes because they will not be powered. They are just for looks which is why I'm adding the LED to them.

Ha! Well thanks!

Performance-PCs.com Sponsor Gear
 

http://i11.photobucket.com/albums/a1...cepc-1-rgb.jpg


Performance-PCs.com will go down as the fastest company to ship sponsor gear ever! I placed my order and got it not even a week later.

Here is the gear!

http://i11.photobucket.com/albums/a1...1/DSC02974.jpg

XSPC EX360 Multi Port and EX240 Multi Port

http://i11.photobucket.com/albums/a1...1/DSC02977.jpg

http://i11.photobucket.com/albums/a1...1/DSC02978.jpg

I like these rads because they have such a high FPI.

http://i11.photobucket.com/albums/a1...1/DSC02979.jpg

6 ports on each rad!

http://i11.photobucket.com/albums/a1...1/DSC02981.jpg

Up next is 2 Bitspower D5/655 mod kits

http://i11.photobucket.com/albums/a1...1/DSC02975.jpg

http://i11.photobucket.com/albums/a1...1/DSC02982.jpg

Installed on the stock pump tops. Temporary setup because I will be using a Bitspower Dual D5/655 pump top in the mod.

http://i11.photobucket.com/albums/a1...1/DSC02987.jpg

http://i11.photobucket.com/albums/a1...1/DSC02986.jpg

Finally the Silverstone Slim ODD and SSD/HDD bay. I really like this because I can fit my Slim ODD and up to 4 SSD/2.5" HDDs in it.

http://i11.photobucket.com/albums/a1...1/DSC02976.jpg

http://i11.photobucket.com/albums/a1...1/DSC02983.jpg

http://i11.photobucket.com/albums/a1...1/DSC02984.jpg


Thats all from them. More modding in the next update.

Cheers till then,

Fuga

Choosing the Leather
 

Now I need your opinion! I got 3 different types of Leather fabric and I'm not sure which one to use. I'm going to post a few pictures of each and I'd like to hear what you have to say!


Option 1:

On the door

http://i11.photobucket.com/albums/a1...1/DSC02996.jpg

Close up

http://i11.photobucket.com/albums/a1...1/DSC02997.jpg

On the mobo

http://i11.photobucket.com/albums/a1...1/DSC03002.jpg

http://i11.photobucket.com/albums/a1...1/DSC03004.jpg


Option 2:

On the door

http://i11.photobucket.com/albums/a1...1/DSC02998.jpg

Close up

http://i11.photobucket.com/albums/a1...1/DSC02999.jpg

On the mobo

http://i11.photobucket.com/albums/a1...1/DSC03010.jpg

http://i11.photobucket.com/albums/a1...1/DSC03008.jpg


Option 3:

On the door

http://i11.photobucket.com/albums/a1...1/DSC03000.jpg

Close up

http://i11.photobucket.com/albums/a1...1/DSC03001.jpg

On the mobo

http://i11.photobucket.com/albums/a1...1/DSC03005.jpg

http://i11.photobucket.com/albums/a1...1/DSC03006.jpg



Please leave your feedback! I really want to know what you guys thing. The leather will cover the door panels, the front bezel and the motherboard's "thermal armor". Hope to hear from you guys!!

Cheers till next time,

Fuga

I like Option 3 for the Motherboard. Should really make it "pop" Option 1 for the door. Same "shades" so ties together nicely. My opinion anyway.

Are you going to be using the 50mm fan? I am just thinking they advise using it in WC'ing applications to get airflow going. Leather is gonna insulate it even further?

Edit: Read your "Parts List" I see it's on there. Which leads me to what fan are you using?(I need a new one, this cheap Fractal Design I have is junk)

Awesome build! I agree with INSTG8R on the leather choices :toast:

agree with the above and nice touch with the leather.

Yep same here with leather choice

subbed!!
i really like the rusty effect