Cooler Master Scout 2 Camo Edition
 

Its been a crazy summer & fall , and has been a blast with my family and friends, but back into the garage i go for a few projects. First project is the New Cooler master Scout 2 case, Having a military name and theme on the box i am definitely going with a camo theme

http://farm8.staticflickr.com/7255/8...31f344e1_c.jpg

http://farm9.staticflickr.com/8483/8...c3a74dbc_c.jpg

The case has a very sleek design and the Handle on top is great for lan gaming

http://farm9.staticflickr.com/8064/8...7159e01e_c.jpg

I like the window, but since i will be watercooling i will be removing the fan grills and making it bigger
http://farm8.staticflickr.com/7276/8...9362a529_c.jpg

planning on removing one or both hard drive cages to make room for teh water cooling
http://farm9.staticflickr.com/8350/8...c436b1f4_c.jpg

Time to break it all down

http://farm9.staticflickr.com/8348/8...6974e363_c.jpg

http://farm8.staticflickr.com/7255/8...269f0dff_c.jpg

using the scout insignia on the side panel

http://farm9.staticflickr.com/8349/8...5e839c69_c.jpg

Camo paracord just need in a few other builds this will be perfect.
http://farm9.staticflickr.com/8489/8...527fcdde_c.jpg

One would think growing up hunting a fishing i would be able to paint camo that wasnt the case lol . It took me three tries and several stencils before i begin to like the design .
sanded and Primed

http://farm9.staticflickr.com/8057/8...b292fd34_c.jpg

black then brown
http://farm8.staticflickr.com/7246/8...41b77ffb_c.jpg

beige

http://farm9.staticflickr.com/8199/8...5561784b_c.jpg

a few touches up and it will be finished

http://farm9.staticflickr.com/8486/8...b0193b05_c.jpg

Started cutting out the Guns and skull out of plexi. I ended up redoing the skull

http://farm9.staticflickr.com/8064/8...3c6151dc_c.jpg

http://farm9.staticflickr.com/8350/8...068e55bd_c.jpg

testing the position

http://farm9.staticflickr.com/8350/8...e77d1d5f_c.jpg

In for sub.
Looks good so far!

Subbed! :toast:

What will you be putting in the case? :)

Touching up a few spots

http://farm9.staticflickr.com/8065/8...c3c08808_c.jpg

getting ready to cut a bigger Window out , I did like how this look but going water cooling make a pretty easy descion for me to do it.
http://farm9.staticflickr.com/8204/8...6a25ab77_c.jpg

sorry a little blurry
http://farm9.staticflickr.com/8062/8...32dc4580_c.jpg

The paint seems to flow to gether nicely
http://farm9.staticflickr.com/8481/8...05b03a95_c.jpg

Camo, aluminum and Mesh from the case what could i make?

http://farm9.staticflickr.com/8063/8...6824dae3_c.jpg

using the logo from the CM scout 2 box

http://farm9.staticflickr.com/8482/8...04124923_c.jpg

no fingers where lost this time ( where my thumb?) jk

http://farm9.staticflickr.com/8342/8...c7e7575d_c.jpg

alittle touch of paint suggestion from my friend Haley!!!

http://farm9.staticflickr.com/8057/8...4e886954_c.jpg

More to come thanks for looking
http://farm9.staticflickr.com/8338/8...5a410902_c.jpg

Looks great! Subbed.

like the work... excellent camo paint! thanks for sharing!

A little break for the holiday Back to modding, Adding another cut out on the case . using a new blade and u can make some nice tight cuts with this.

http://farm9.staticflickr.com/8067/8...2dd52216_c.jpg

http://farm9.staticflickr.com/8059/8...b81cdf4a_c.jpg

Cm red

http://farm9.staticflickr.com/8350/8...1c71b25f_c.jpg

but the finish looks pretty good
http://farm9.staticflickr.com/8210/8...6e8e72eb_c.jpg

Making room for the 240 rad for the front of the case, The optical drive bays made it too snug, i no longer use optical drives so one less bay wont hurt. so time to bring the dremal out

http://farm9.staticflickr.com/8065/8...023bcf4f_c.jpg

Fits now
http://farm9.staticflickr.com/8062/8...7e8e5312_c.jpg


http://farm9.staticflickr.com/8488/8...d0c356c0_c.jpg

Stayed tuned more to come!!

Next up The camo shroud for the interior!!! Dremal Time

http://farm9.staticflickr.com/8346/8...d6cc8833_c.jpg

mesuring it up

http://farm9.staticflickr.com/8343/8...9bb878b7_c.jpg

getting ready to make a bend, now wear did i put that bender( all 250 lbs of it)

http://farm9.staticflickr.com/8486/8...e95eefc6_c.jpg

It was alot harder to bend than i thought, I need to eat some more and try again

http://farm9.staticflickr.com/8344/8...1fb83385_c.jpg

time to to connect them

http://farm9.staticflickr.com/8064/8...76787ab7_c.jpg

test fit
http://farm9.staticflickr.com/8063/8...192652be_c.jpg

sand down my edge

http://farm9.staticflickr.com/8058/8...085affe8_c.jpg

a little paint
http://farm9.staticflickr.com/8482/8...08b09aeb_c.jpg

a little camo

http://farm9.staticflickr.com/8198/8...ac13901f_c.jpg

More to come!!!

More updates!!!!

finishing cutting out the window

http://farm9.staticflickr.com/8203/8...ed8f4172_c.jpg


Cut out a piece of smoked arcylic

http://farm9.staticflickr.com/8203/8...40b9d7d6_c.jpg

Time to etch!!!

http://farm9.staticflickr.com/8478/8...711d90ef_c.jpg

Lights out flashlight on( redneck light table (lol)
http://farm9.staticflickr.com/8219/8...2c5b8050_c.jpg

I used the etcher on teh ponited ends then bring out the dremal to finish the larger areas
http://farm9.staticflickr.com/8342/8...1d323d8c_c.jpg

http://farm9.staticflickr.com/8493/8...a82abcc7_c.jpg


I will finish the missed spots and clean it all up
http://farm9.staticflickr.com/8200/8...cba6719a_c.jpg



Side window panel done!!!

http://farm9.staticflickr.com/8209/8...c55990ca_c.jpg

Great job so far :toast:

Looking nice!

In order to be stealthy We need to add some silent fans, But clear isnt going to work.

http://farm9.staticflickr.com/8342/8...0b21f1bc_c.jpg

One of my fav thing about these fans i sthe fan just pops off
http://farm9.staticflickr.com/8066/8...b8206d90_c.jpg

http://farm9.staticflickr.com/8203/8...3f87d2da_c.jpg

Flat Black
http://farm9.staticflickr.com/8349/8...23ffac3e_c.jpg

next up sleeving
http://farm9.staticflickr.com/8482/8...d2c4538b_c.jpg

little ass screw drive does have a purpose
http://farm9.staticflickr.com/8063/8...1da3c246_c.jpg

all yea camo sleeving
http://farm9.staticflickr.com/8348/8...1ef39795_c.jpg

http://farm9.staticflickr.com/8481/8...bb49a268_c.jpg

http://farm9.staticflickr.com/8202/8...fe8f73ab_c.jpg

A couple of cool things about this pc , its headed to CES in las Vegas in Jan ( super excited). I will have to finish with the components when its gets back, It also entered inot the 2012 coolermaster case mod contest If you like it please follow the link on facebook http://woobox.com/qz4swg/vote/for/138536 also vote for your favorite thank you


http://farm9.staticflickr.com/8065/8...13ab15b4_c.jpg

http://farm9.staticflickr.com/8211/8...1116b20a_c.jpg

http://farm9.staticflickr.com/8059/8...16898b07_c.jpg

http://farm9.staticflickr.com/8071/8...9d0e8fca_c.jpg

http://farm9.staticflickr.com/8504/8...748f3925_c.jpg

http://farm9.staticflickr.com/8083/8...414c32ce_c.jpg

http://farm9.staticflickr.com/8349/8...a844f661_c.jpg
Thanks for watching keep watching after the new year for the New components

Looks awesome! Only little thing I noticed, is the cut for the side window, looks a bit jagged. Thought about getting some sandpaper onto that?

(good eye) i did pop the window out and and clean the edge a little bit, I may get some black u trim and go around it

What about the "scars" over the Scout emblem? Is it part of the design? Just asking :)

I kept wanting to give it some battle scars and i am still undecided.

Modding tip ( I usually lay a towel down when working with a finish piece)
and didnt notice when i was riviting back the bay drives that it was laying on scrapes of metal.

I brush painted the spots before boxing up,

still might scruff it up a bit when it comes back from Vegas

In my humble opinion it look more like you butchered the job. Could think of a painted design with torn metal or bullet holets instead maybe.

butchered ? it is was scratch on my work bench, I am NOT going to painnt fake bullits holes or torn metal. If i wanted that effect it would be real

Watch out we got a badass over here :P

and we got a troll !!! Move on wannabe

it's the language barrier i guess. English is not my first one. :)

Must be reading from the book of troll again

I usually hate camo, but that is quite awesome. Love the whole thing :toast: