TPU's Core i7 Overclocking and Feedback
 

Core i7 LGA1366 Overclocking and Feedback

http://img.techpowerup.org/081117/Capture002740.jpg

http://img.techpowerup.org/081117/Capture004.jpg

Some screen shots of the CPU at load and idle, will be putting SuperPi and 3DMark 06 and Vantage scores up in a few then on to the fun. For now I am using the stock cooler, going to see what temps are like if I use MX-2 instead of the TIM on the HS too. VID for the chip can be seein on the RealTemp screen, 1.0875.

jesus christ stock cooler blows somethin feirce

Yup, but as it stands, unless you custom make a mount for a different cooler, I think its about all there is to work with for now. Hopefully MX-2 will drop those enough to at least get me 3-3.2GHz stable with out it burning up.

Those temps are crazy high at only 1.048v :eek: What's the benefit of having bleeding edge hardware, if you can't push it?

lol after market is the way to go even stock when i get the rest of my rig first thing im doing is either getting a WC adapter or getting a WC adapter and stealing one of fits TEC plates

I wonder if Intel lied about the operating speed of the i7 CPUs. If you look at the screen shot where I am checking temps with prime, the 920 is reading a 21x multi instead of the 20x it should be so the CPU is operating at 2.8GHz instead of 2.66GHz like it is advertised to do.

hmmmm maybe its a mobo over ride? i think the 920 was supposed to have a 21 multi maybe fit can show us a SS and i will when i get my rig

subscribed...

this is going to be extremely interesting!
An insite to the new tech! Goodluck with Overclocking these babies...:rockout:

This will be interesting to watch, especially with the apparent thermal issues right now. I'm going to sit back for about 6 months before I jump on board.

Hopefully fitseries will be finished setting up his TEC soon and he can do more than I. When I have access to a digi cam I will put up screen shots of my BIOS.

This goes for any platform. Hell, I'm even using after market cooling on my 8 yr old daughter's rig. :laugh:

so am I.... but only cause I out of money!!!:banghead:

21x multiplier is with turbo mode on, stock multi is 20x

it can be 22x multiplier if only 1 core is active.

thnx the bios s what im intrsted in

you think realtemp VID is correct? It says mine is .9750

This is going to be like learning to overclock all over again, just a quick peek I did on my first boot was enough to freak me a little bit.

maybe throttling?

It looks like the Cooler Master Z600 works on the i7. Sneekypeete has one for sale for $30!!

http://www.coolermaster.com/products...detail&id=4509

Yea i haven't checked my VID under load yet, guess i can check once i get home...

yea the bios is confusing as first, you see all the voltages? The only ones you need to push to overclock is ram/vcore/qpi, the rest can be left on auto.

Well at idle it says mine is something under 1.0v, and at full load says 1.0875v. Coretemp won't show the VID, and the Voltage reading in CPU-z are fairly different from what Realtemp reads, and when using the ASUS TurboV overclocking program, it reads the core voltage as 1.225v. So CPU-z and ASUS TurboV have the closest #, so going with something around those for now.

Don't use TurboV, it freezes my overclock everytime i try it. at idle, cpu-z reads the exact same voltage for me also, 1.048. on load, it reads 1.2.

well enough playing around, crank that BLCK up to 200mhz

heres mine
http://forums.techpowerup.com/showthread.php?t=76246

Benches as promised. Not using the Turbo V program, just comparing #s in it.

http://img.techpowerup.org/081117/Capture005.jpg

http://img.techpowerup.org/081117/Capture006.jpg

http://img.techpowerup.org/081117/Capture007.jpg

Nice find, works with the Hyper 212 which I got from Sneeky last week, going to go see if I can find that online somewhere and possibly overnight it.

Look again Paulie, that's 1.32V under load, and the stock cooler isn't much better than the Core2Quad stock coolers. Seems about right to me.

That's the Turbo mode