good job dude :toast:

What do you have crunching?

All I have crunching is my PII 720(on four cores) @3.6Ghz and my X2 5000+ @3Ghz, both are at 100%. I'm not sure how I beat them, especially Velvet, since he has an i7 helping him.:confused: We'll see tomorrow if I can stay in front of them.

If it keeps going at this rate I might get to 70K in two days!:rockout:

i dont think he does have an i7 helping him, don't think he got around to doing it.

Oh, I was under the impression that he did.

where do you get that nice point chart for WCG?

not sure, but I think it didn't end up working out, at least not yet.

i have it crunching velvet wafer and pos pc but they switch days back and forth i cant get it to let me have two account at the same time

Awesome thanks man!

I have to say thank you dustyshiv you're a big part of TPU! :toast: !! you make me want to be a better crucher! thanks brother! Sometimes i feel like giving up.. but cruncherz like you and bogi! and the rest of the TPU team.. make me want to push forward... thanks.... thank you..

Yep ~ I should be getting my water cooling gear for my i7 rig any day :laugh:
Then I will see what she can really do!!!

i have the 5000+ online again, since yesterday. it had a 3 days outtime:P
But youre right, i wont say things, that arent 90% and up to happen;)
i believe, we will be fightin for place 40-35, our outputs will be in 100 point range.... it will be like a truck race, taking hours (in our case days,weeks) for someone to pass the other;)

It wont, sometimes Berkely just validates more... for me it is normally: good day,bad day,good day,bad day;)

Its a little difficult to communicate with X2, he seems to work a lot,so he is only mostly lately, and when its 1 o clock in the morning for americans, its 5 o clock at me :D but i work too, so dont got much more sleep than 2-4 hours a night,the last month or so (only on the weekend, i slept like 8 hours a day)

But we will work it out,if X2 would like to. i just dont know if POS decision was final, or just an idea. we need a conference somehow :D

many thanks again, its a shitty work to do :-)

@ Velvet
:D need i say more?

I don't know how you beat me I have same amount of cores as you do just with my X2s
i have 3 X2s@3ghz=6cores you have 1 phII 720@4cores@3.6ghz+1 x2@3ghz. If it was just those i would understand but i also have a Phenom 9500,AXP,2P4s,1celly. nice job on that :toast: can't wait to get my quad :D

Good job pos :toast:

It was probably only a one time thing because today my points aren't nearly as high as they were yesterday at this time. We'll see what happens with the next update, but I doubt I can get more points then you or Velvet again.

you sometimes get a point spike,thats pretty normal;)

i added an atom today, maybe it will give a few points... at the moment the major amount of my random crunchers is passed away, due to heat and drive issues. but i can only say one thing: ive maybe got a secret trump in my hand. to play it,when you are at your highest point:D

happy crunching:toast:

i can see us having some fun with this little crunch war :toast: aslong as money allows i will do what i can. Hope i can get atleast 2 more quads soon. Maybe a PII and a PI.

does this thing automatically report or do i have to make it do it

http://img.techpowerup.org/090924/vw.png

it does it by its self but you can update it by yourself if you want

If you go to the projects tab and highlight World Community Grid, there should be a button on the left that says "update". It should do it by itself but sometimes I see 4 or 6 completed packets backed up on my 3GHz Kuma so god knows how much it will back up on your i7... you may want to go to advanced - preferences - network usage and set a bigger work buffer. Also, go to the activity tab at the top and select "network activity always available"

there is also a modded CML(IIRC)file that reports them when they get done...look in the thread for it or someone could upload it again for you.. if i had it handy i would..

And today I'm smashed right in between you guys :P hah I can't hang though, just moved up to new apt for school and bills are sent to me not the parents. I switched all the lightbulbs to 13W and told my roomates to never turn the heat on or use unnecessary lights just to keep this baby going. hopefully that E2200 will make up for my down grading to 3.0ghz. :D

1. Download the modded configuration file (see below)

2. Run the self-extracting EXE you downloaded

3. Copy the cc_config.xml file from wherever you extracted it to to one of the following locations (note, you may have to tell Windows to hidden files and folders, if there is already a cc_config.xml file, overwrite it.):

3a. XP: C:\Documents and Settings\All Users\Application Data\BOINC\

3b. Vista & 7: C:\ProgramData\BOINC

4. Tell BOINC to read the new configuration from the config fie. To do so, go to Advanced-->Read Config file

5. You're done. As soon as a work unit finishes, BOINC will report it

I had just posted it, I missed IOn's post. The CC file helps tremendously

lol X2, you never understood what file i wanted you to change:laugh:

and i wondered about no output:D

i got your 9600 still up and running ;-)

You got me by a few points this morning velvet, goodjob dude :toast:



However my e7200 was off all lastnight. I had the psu with the fan against the bottom of the benchtable. Guess it got too hot or something :confused:

x2 how do you like that i7 860? have you overclocked it yet?

@CP you getting a 5870? anybody have one or getting one, or maybe the 5850?

Not at the moment mindweaver. But I would like to get one later on

I plan on getting a 5850 as soon as they are available, the 5870 is a little too pricey right now.

there is no chance in me even being close in points today to you. I have had ALL my rigs off today i had to "fog" the house because of spiders..So the rigs had to be covered.

I have your 8800GT running again for you X2

i also have the rigs crunching again. also it is spider free in here now :D

http://img.techpowerup.org/090925/error log.png

WCG is running on a Q9300 at 100% stock clocks. It's stable in OCCT and a couple other benches and I experience 0 system stability issues so it doesn't look like a faulty core. Every single error is for Human Proteome Folding and it only errors on my Q9300. The E4500 that I also run doesn't have issue with any work unit. Looking at the history of the work units, I see that in most I'm not the only cruncher to encounter an error, I just seem to be hitting alot of them. Any suggestions? I'd rather not throw away 6-12 hours of 1 core's time a day.

As a note, every Human Proteome Folding work unit done by my Q9300 is 'error' where every one done by my E4500 is successful. No other units / projects have errored.

Human Proteome folding is one of the more buggy projects there is, and for that reason I don't run it. There is no real solution so far other than unselecting it in the projects list.

Hey Guys, Did you miss me?? :p

Sorry. Me and my cruncher sidekick have been slacking of the late but internet account is back up and running now so watch for my contributions to be pulling me back up the ranks!! :)

Missed all you guys!! :toast:

welcome back dude :toast:

I don't want you to feel left out! This project errors like crazy and as soon as I get 365 days of crunching on this project it will be history. I need 83 more days.

It doesn't seem to error on my Gigabyte DDR3 P45 Q6600 (Vista 32-bit) machine or my MSI K9A2 9950 (XP Pro 32-bit) but it does error like crazy on all my 3 i7s (Vista 64-bit/Windows 7 RC) and a Gigabyte DDR2 P45 Q6600 (Windows 7 RC). I checked and noticed that all of my machines do get some valid WUs.

I just hate to see them pop up but most of the time when they error they do it pretty quickly.

my i7 doesn't do preteom folding, it erros out as well. Guess its common. none of my rigs pass it.

they do fine on my X2s,AXP,P4s but error almost everytime on the Phenom 9500

EDIT:It looks like it does fine on only 1 of the 3 X2s. I don't know what the problem is but i'm not going to keep crunching bad task.

I just noticed that the 2 machines that this project seems to work on run Vista 32-bit and XP Pro 32-bit. The machines that error run either Vista 64-bit or Window 7 64-bit.

The Phenom is on Vista 64bit all the other rigs are on XP pro 32bit... but doesn't seem to matter much. All of them on the vista rig error all the others do about 75% of the time. maybe this info could be helpful to someone :toast:

I'd continue crunching it but it doesn't error out fast for me. As you can see almost every single one goes for 6-8 hours and still does nothing. Is it possible to remove that project at the machine level (I can take it off the Q9300 but leave it on the E4500) or is it just removed at the user level (El Fiendo never again crunches for Human Proteome Folding)?

Also, my clients mirror the 32bit / 64 bit phenomena. The E4500 obviously being the 32bit OS.

today sucked, my 2nd rig has crunched just over 100 points :( Not enough memory error when I got back home, and it shut down WCG, CCC stopped responding and all. Adding more RAM now and rebooting.

I just checked the result status for my errors and found that since the 14th almost all the errors are between 0.01 to 0.03 but I did find one that did it at 5.41. Sept 13 and prior there are quite a few with errors from 2 to 4 (correction) hours.

Oh, I forgot to mention. The picture up above reports 0.0 CPU time spent on the units but I've witnessed one of the units tie up a core for several hours whilst doing nothing, which is why I say I'm throwing away CPU time with these. I don't know if that means anything or not though.

i have never heard of that. I haven't even had that problem with only 512mb that i was running before on my AXP or one of the X2s. But i also upgraded that vary fast. The AXP has 1gb.all the X2s have 2gb running @800+@CL5... how much did you have running?

seems to be a bug with 64bit :wtf:
Also i don't think you can do anything at system level only user level :ohwell:

1gb on windows 7.

Yea it looks good bro. I want a 2gb version lol

yea the 5850 sound like they will be good too.

I hope the GTX285 drop in price, and i might get another one. Just sli this one when i get the p55 board and i7 860.

the chips awesome hits 4.2ghz with ease havent really got used to the bios on this board but i think i could hit 4.6 after tweaking:toast:

i also wanted to let pos and velvet know that i forgot 2 switch the client over to pos the other night,so right now im reporting everything for velvet and it will switch over to pos for 2 days and then back to velvet..guys let me know if u get the results