Amazing that I'm still fielding at least 10 to 15 pump requests each week. Sorry people, All Sold Out.
—– ===== ALL SOLD OUT ===== —–
Thank you everyone.
Pumps are available.
Look up DIYINHK on the web. The Sanyo PCB replacements are still available. :)
The original PWM is Laing Apple/Dell proprietary based.
Bump about pumps.
Need a pump ? :toast:
No cause for any alarm. Glad you pointed that out for others. The T-20 are better suited anyways since those ensure the proper torque to bottom out...
Yes, the original screws for the DDC pumps are T-20. They are however slotted T-20s, thus a flat blade will work too in a pinch. ;)
Will do. :)
Cool. Will do, see your PM.
One thing looks a bit upside down .... the RAD.
Normally, the inlet/outlet fittings are on the bottom.
Your loop with the RAD...
Yes, usually starting off with a cooler Watt CPU is better to OC with. It gives you head room to push the envelope further up the Ghz/Mhz ladder....
Need a new pump?
Laing DDC-1T aka MCP350 pumps are available ....
I had an MSI with an OC PCU going strong for awhile. Then the black and blue screens arrived after a year. Well, it was a pre-warning, the CPU...
Bummer you CPU wasn't either of the 65W. CPUs tend to throttle back when pushed to the higher voltage and the watts in heat rises. If the thermal...
It's been a few years, if I recall AMD had a few variations of the Athlon 3800+. The one prior to the die size shrink could be an overclockers...
bump for today.
Need a pump or two. A great deal on "overstock" new pumps.
Yes, a have a few left.
Actually the DDC-1T aka MCP350 is only 10W. The fan header can support 12W. Many people just run the DDC-1T from the CPU fan header to get the tach...
The DDC-1T aka MCP350 is 10W and runs easily off of the CPU header. That's how I've had mine since 2003 running nearly 24/7/365.
So, how much does a MCP350 pump cost from PPCS these days?
The MCP350 pumps I offer are "new" too and $35 shipped anywhere in the USA.
This should be done just to see if the pump PCB had lost it's way. Getting a flash to the pump can only help.
Corsair at one time used the Laing...
If you can take anything apart like a water-block that is screwed together or fittings or etc, use the flush mix or the distilled white vinegar and a...
Hi, what's the trick getting the heatware stub in your postings?
Nope, I've been watching the USPS. The counter people mentioned the change on January 26th. Nothing happened. That is puzzling to me.
Separate names with a comma.