XFX did respond promptly and said to not even bother upgrading unless I am having specific problems. I responded as to why I thought I might need...
I guess my main concern is going from a Zip file format to ISO. And it is for a motherboard, XFX 790i Ultra SLI. I am trying to RAID 0 two SSDs and...
Instructions are to download ZIP file and create ISO on CD/DVD.
Sounds simple but I am famous for screwing things up and could
use advise or...
It is probably electromagnetic interference (EMI).
This is usually caused by poor or inadequate cable shielding
or insulation. You might try...
A couple of ideas..
1. Make sure you have USB enabled in BIOS.
2. Disconnect the case USB connections from
your motherboard and just use the USB...
Try booting in Safe Mode.
I will crossfire them. ~30 % gain in Fraps is not too bad.
Monitor is HP w2448hc
Rez = 1920X1200
I was wondering about increasing FPS in games.
I have 2 4870X2s and considering Crossfiring them.
How much % performance gain can I expect? I last
Xfired 2900 Pros and was very disappointed.
If your PSU uses modular cables make sure a connection has not come loose at the PSU.
Yes, I know its a longshot.
Thank you sir.
Can you get into BIOS with your hard drive disconnected? Doesn't BIOS reside on a motherboard chip?
Could be your (new) Power Supply. After all you have done it is about the only thing left.
Are you using a stock cooler?
Anyway I reccomend reseting your BIOS.
Start from scratch and bump your FSB in 10 MHz steps and use Prime 95
How are you cooling your CPU?
What CPU voltages have you tried?
I have one 9650 @ 4GHz at 3.75V.
I have another 9650 @ 4GHz at 3.5V.
I am OCing a Q9650 w/ Rampage Extreme motherboard. Could someone please explain when to skew and what the different amounts mean? Thanks a lot.
Finally configured RAID 0 going in Vista. Ended up having to 'uncheck' the box that was supposed to prevent the display of non-compatible drivers....
Sorry, no. Gigabyte X48T.
Think I have RAID 0 set up right in BIOS and Intel Matrix Control but during the Vista installation when it asks for a driver it can't find it....
Interesting. My experience with Crysis indicated that Crossfire was the issue. More specifically with one 2900 it defaulted to HIGH, but with 2900s...
Graphics card fan full blast, nothing else happens.
This symtom is familiar to me. It was a loose 6pin 12V
PCIE power connector in my case.
New Build with E8500 & X48T hit a wall at 3.9GHz.
Pretty sure RAM is the limiting factor (Rated 1333 DDR3)
Strapped at 333/1:1/8-8-8-24/1640MHz...
J-MAN: "It can't be my graphic card crapping out because I've only had it for like 2 months, probably not even that. Should I uninstall the drivers...
Gee, thanks for all the constructive suggestions. I'm overwhelmed.
Nevermind. I found the problem.
New GiG X48T won't power up.
Disconnected all except for CPU w/ cooler, ATX 12V and Main ATX power inputs.
Shouldn't I see at least the PWR...
Separate names with a comma.