Wow man, you want to instant kill your card and maybe your pc.
You should not go above 1.4v, at above 2v your gpu could explode.
And if you are...
I just record it now my artifact problem with MSIA.
Run vantage at 900/1300 with 1.2v on my unlocked 6950.
Here is the video:...
atiwinflash -unlockrom 1
If it shows something than ok.
Or maybe you should just try atiwinflash -unlockrom because you have just...
But first do you use this command??
atiwinflash -unlockrom 0
I'v tried 10.12a, and now i know that i did not have luck with this card, i just cant increase the voltage at all.
So now i'm using my bios just...
I now flash back to my original 1408 shader 6950 bios that i take from gpuz and keep it from day one.
And now apparently MSIA voltage works, so i...
Thanks for your effort but trust me I'v tried more things than you can imagine:banghead:,flashed my card more than 20 times for the past couple of...
I found that my voltage is actually the vid3, but for some reason sapphire bios can't increase the voltage at all.
So now I use assus...
I read somewhere that it is actually working.
I'm the proof kind of:p
Because the driver recognize the moded vendor and all was ok in 2d.
Yes I did that the first day, but I want more overclock than 840.
So f I change vendor to assus in my bios, than smart doctor will work, and with...
I tried with changing the vendor from my sapphire bios to assus via rbe in sub vendor ID field, to unlock via smart doctor...
So the final result is that nor VID3 nor VID4 work for me, even combined (increased to 1.2v).
So what is going on here??
So what to do, apparently vid3 and vid4 are not working for me.
Is it safe to try increase them both at the same time??
Do I have to...
For me both vid3 and vid4 are not working.
I tried with:
just moded bios;
moded + Vid3;
moded + Vid4;
noting works, always is...
So i'v read that there is a problem oc-ing above ccc limit with MSIA if you use unlocked 6950 bios.
But what is wrong with just flashing to 6970...
So by your experience what do you think it is the best option to do?
Use 6950 unlocked bios and oc it (with increasing voltage in rbe first);
I plan to take one 6950 in monday.
So the best option that I find so far is to:
1. Take the bios from 6950,
2. With RBE increase voltage to Ex:...
It is fixed now in the new 0.2.8 version :toast:
I'm new JW-X48D2-EXTREME user. The board seem all in all good, but I have some issues that bother me.
So first here is my full config:...
Separate names with a comma.