Hosted by Tigerdirect: a Cooler Master Z600R.
Hmm. Since I don't seem to be able to upload a pic, here's another from Tigerdirect:
It's pics like this that motivate me to get inside my machines to clean them so they won't look this bad.
It's too bad the front surface has room for only one fan. If there were a 120x240mm or 140x280mm space there, you could fit in a double rad, do some...
Perhaps it wasn't trapped? Perhaps it died and that is the position it ended up in when rigor mortis set in.
Too expensive. What you want is right in the Thermalright line. TY-140, TY-141, TY-143, TY-147. All are perfect for the job. You can pay twice as...
A nightmare in blue . . .and yellow, and orange -- and the blending of the cables makes me think I'm seeing green sometimes.
Write NZXT customer service/ tech support.
I cut out the slot pillars (my name for the sheet metal between the slots) because in airplanes, ground effect holds sway until you get a whole...
but so Ghetto.
The Beta Evo is a great case, isn't it?
I did a review of the Phantom 410 here. I liked it, but it has some issues IMO.
I got that one. Don't get it. They also make a front device that comes without the HD stuff and without its own fan. Since the EX-33N fan was so...
I hate to criticize freeware, but compared to OCCT 3.1, OCCT 4.0 seems to have problems.
The heat produced by OCCT/Linpack 3.1 generally matched...
@t77snapshot - Smart man, getting rid of those grills.
johnnyfive - what a beautiful setup. What beautiful photography. What great cable management.
EvolvA - thanks for letting me know about the system...
I can't decide on this:
Have to test, of course.
Count me in:
One NZXT Beta Evo, modded of course.
Why bother with flash? It generally looks nasty. Instead, break out your tripod. Then set your camera to shutter timer/delay. Push the shutter then...
Quality fan controllers =/= slot fan controllers.
I've ditched all of mine. They make a good fan sound bad.
Looks like an original Cylon. Wouldn't want one of those staring at me - from on my desk or (perhaps worse) - under it.
t77snapsot - excellent choices. You have really freed up the air in there. Did you get before and after temps?
First of all, will you have room behind the MB tray once you are done cutting? If not, why bother?
You should be able to improve the air intake by...
Separate names with a comma.