I would like to thank those who fold under my name :toast:
thank you for keeping my name alive
I would like to thank you all from the bottom of my heart.Your message go straight to my heart
and your friendship request too.
I started the...
sorry for not having answered earlier, I'm having the surgery later in the day, I could not reply before 2-3 days after.My condition is stable now...
thank you all for your support
I appreciate all you did for me,to keep my name alive help me a lot.you guys made me cry this morning.I'm still...
Unfortunately my health has degraded a lot since last month.I can not take care of my rig as i would.All my rigs are down now except my q6600.
my old p4 3000MHz @ 3600MHz gives me 400-450 ppd but produces a lots of heats. I want to remove it from my farm it sucks too much power/heat for...
cpu voltage 1.28
cpu gtl referance voltage 0/2 auto
cpu gtl referance voltage 1/3 auto
cpu pll voltage 1.54
fsb terminaison voltage 1.22 or...
every 1066mhz memory stick need more voltage to operate at 1066mhz (bios voltage at auto don't feed 2.1 volt to your memory)
i have some corsair...
look at the spec of your RAM chips 1066mhz= 2.0-2.1-or 2.2 volt
look on the memory stick label (timing and voltage)
you should reach 400 fsb with all your voltage at auto except for the memory 2.1 volt maybe just a little more voltage on the fsb
Here is a...
CPU/Processor Socket: AM2
Supports the following processors:
Athlon64 X2 4200+, up to 35 watt
Athlon 64 up to 35 watt
Sempron up to 35 watt...
you have a Q9300 if I understood
7.5 x 400 = 3000mhz
in bios set manually your memory voltage (around 2.1 volt )
Fsb voltage to 1.20 or 1.24...
we need more information fill your systeme spec
cpu , overclocked, bios voltage setting ?
''When I first overclocked this board it would do a...
a new version of boinc client is available since February 3 for windows 7, vista,xp,mac,linux (X86 - x64)...
:roll::roll:its reminds me of good memories
not at all at least I try something :toast:
the pcb turn to yellow/brown in the red area
385-400f 9-10 minutes the solder looked refluxed ? yes more chrome
all the caps are in perfect condition it dead it good for the garbage
not today i'm sick now and it just too hot here (4 rig in the living room/kitchen and the oven)
no it a no go
i plug the card and the pc no led,no fan spinnning
still really hot and i don't want to open my window it too cold outside (crack solder...)
its stinks I have a headache now
i'll be back 2 min
video card is in the oven now we'll see after:toast:........what a smell :twitch:
edit: cooling time now
i'm ready to try but 1 more question
how to install the card into the oven gpu up or gpu towards the oven grills ?
i'll start with the 9800gt sorry bad pic crappy camera
Separate names with a comma.