BC2 should be here any time now! Can't wait! :D
I didn't think to try ebay tbh, got one on the way. £1 & free post.
Thanks for the offer anyway mate :toast:
I'm trying to get the audio over HDMI to work with my GTX280, so it looks like I need the SPDIF cable for the card.
Are the DVI-HDMI...
That's very impressive! Will be watching, good luck to both of them for sub 6s.
Hmmm, I was thinking you can do a physical pin mod (BSEL mod) to increase the FSB, but since stock is 333mhz, the next step would be 400mhz and I...
8 Hours should be enough. 20A will only be applied for the first part of the charge, until the battery is 70-80% charged, and then it trickles off...
Sorry to contradict you Kreij..
Speaking from experience, a car starter battery will die very quickly if you're using it in a deep cycle...
Mobo and blu-ray drive arrived this morning, so compy will be up and running tonight!
Getting my computer back up together in the next couple of days, so I'll be back folding again :)
You lot have made great progress...
You're probably right, I was thinking along the lines of intel CPU's and didn't check his specs. My apologies.
Oops, I missed that. In that case yes, 70c is too hot.
Yeah, i'll be sure to use some clips on it! :laugh:
Ok, the 400W pelt is on it's way :)
Shouldn't do, I ran it for a couple of hours with a really narrow hose on it to restrict it, and then tried blocking it off completely and it was...
Should be fine, I've ran it directly from the hosepipe before, which is about the same flow rate, but a lot higher pressure. Problem is the mains...
Good idea mate :)
The only prob I have is that I don't really have a way of measuring the temp of the chip. The sensors on this chip get stuck at roughly 23c.
Ok, went to buy the pelt/cold plate from frozen cpu, and the postage will cost more than the stuff!
Had a quick look on ebay, and there's a 400W...
Hmm, just tried in XP and got the same result. Also tried lowering the FSB to 499mhz, still no good. Getting 16.xx consistently.
I've noticed the...
I've run an e2160 with No HSF on it at all, just the bare chip... I couldn't get it to budge over 105c.
Admitedly I had dropped the...
I can pass it at 4.4GHz for an hour (no need to go any longer IMO).
I'm lazy and hate to wait for the results of a stability test, so I prefer...
That's what i'm doing, tried different keys & buttons and even another mouse.
I'll try it under xp and see if it's the same.
I'm getting around 16ms input lag according to the tester thingey... :confused:
Congrats Radaja! ;)
Nice clocks on the ram!
Same here! :)
Going for 5.4ghz+ soon on water + TEC!
Just over $300 for the P128 at newegg... IMO that's pretty reasonable for that kinda performance.
Separate names with a comma.