Quote:
Originally Posted by Kenshai
Should be neat, but one question. Did you sand it all the way down to the straight mdf? On the build log he put a sealant on it, but sand paper (especially 150 grit) will eat right through anything he put on. So if you did and you didn't use an oil based primer there could be issues with the mdf swelling.
|
Wow I didn't know that, shows you how inexperience I am at wood work.
No, I did not sand all the way down to bare wood. I kept that seal and some of the old spray paint on well because I had a bad feeling if I stripped it
. Looks like a good thing I didn't or I would have been screwed because the primer is water based.
But now those sections are bare wood... Sigh