[manofthem]

Originally Posted by wmblalock

Save your bios from your card to your had drive, atiwinflash can do this. Then use the Load Bios button in RBE to load your bios. Right now I think RBE only lets us modify voltage on our cards, so don't mess with anything else. Once your bios is loaded, go to the Clock Settings tab at the top. Now click the GPU Registers button near the bottom left of the screen. Either VID3 or VID4 is where you need to put in what voltage you want for 3D. Some people need to use VID3 and some need to use VID4. After you've put in the what you want (ex 1200 for 1.200v), click ok to close the register, then slick Save Bios at the bottom to save your new bios file. Use winflash to flash that new bios back to the card. You may have to try VID3 and VID4 one at a time to see which one raises your overclock ability and temperatures. Mine uses VID4, but I know some other have to adjust VID3.

Awesome thanks, that's what I needed to know. I should be able to work it from there with your instructions. Are you on an XFX by any chance?