Hiya, Im new on here, I joined after finding this topic as you do... Well, I gotta a big headache, maybe you can help/advise me? I've just completed a system build which consists of : intel Q6600 SLACR (G0) CPU - ASRock Conroe865PE MB - 2 x Kingston KTM-M50/1Gb RAM Modules - Sapphire HD3850 AGP Gfx Card - Creative Labs Audigy Sound Card - PowerCool GT 700w PSU with dual 12v rails rated at 22A each! PHEW! Now when I turn on the system with both RAM in dual channel config I get a blank screen, when i put them in single channel mode the POST appears and I can get into the bios, change things, etc. Also, when I try to boot off the HDD, I get BSOD's so try to boot off Windows DVD an run setup but same again or just reboots. I tried running with 1 stick of RAM in there but same symptoms... any ideas as Im fresh out!! Bear in mind that Ive completely stripped an rebuilt this system 3 times today an im getting a bit desperate... The BIOS is P1.70. and its showing correct RAM speeds, size etc and the CPU is showing correct type, model, speed, etc.
Thanx in advance