Quote:
Originally Posted by OneMoar
how thefuck
|
?
Quote:
Originally Posted by SonDa5
Well if somebody were to plan on de-lidding/removing fluxless solder I think there should be a planned TIM to be used. Makes no sense to destroy the factory IHS design if an improved method of cooling isn't possible.
Not all CPUs would benefit from de-lidding but IB does because of Intel's poor IHS design.
|
Most CPU's benefit from delidding. AMD chips do as well and since most have been soldered people have been sanding through them for a while. The trick is to wrap the sandpaper around a small piece of glass to make sure you are sanding nice and level.