Originally Posted by Ziquester
Btw I don't think I mentioned it but when I have any HDD or SSD on the Sata 6GB/s and boot up,it comes up with an error that says "there is no boot drive,please insert a boot drive and press any key"-something along those lines.
That seems to indicate the drive WAS detected and the boot order changed in your system BIOS and is trying to boot the drive on the Marvel controller. Do this again and go into the system BIOS and see if it's showing a drive. At this time, also check your boot order and change it back to boot from the drive you have setup on the Intel controller. Once in windows, see if the drive on the Marvel is visable.