Hi
If you are using onboard vga to boot try the -i command at 1 to see if adapter is at this address
Example: atiflash -i 1
make sure you are using this version of atiflash -
http://www.techpowerup.com/downloads...sh%203.99.html
Very useful post by CrackerJack -
http://www.techpowerup.com/forums/sh...ad.php?t=57750
have a read through this post - lots of info on recovery -
http://www.techpowerup.com/forums/sh...=174867&page=4
atb
Law-II