Hi
Quote:
Originally Posted by Dwilton
Would it be possible to use ATIflash to force change all of the relevant fields to a similar card then try to flash or should -f have taken care of that?
|
Yes -f command should have done this
Quote:
Originally Posted by Dwilton
I also noticed on the -i screen that it says ROM size 10k. IS that the current ROM size or Capacity?
|
Yes [this may be damaged or reporting inconsistently]
This may be worth a try; make a new bootable flash drive and use the latest version of atiflash - [if you havent already done so]
How to make a flash drive bootable:
go here
http://files.extremeoverclocking.com/browse.php?c=21
grab- HP USB Disk Storage Format Tool - v2.1.8 & Windows 98 System Files
click Primary Download unzip the files to a folder on your HDD; make sure your USB Memory stick is attached to your PC; open HP USB Disk Storage Format Tool v2.1.8 ; select Creat a DOS startup disk/ select: using DOS system files located at: (these are the files you have just downloaded): browse to the files in win98boot; then start the process
grab the latest version of atiflash here -
http://www.techpowerup.com/downloads...sh%203.99.html
Next
Put atiflash.exe and the bios on a USB key.
Set the motherboard bios to boot from USB key.
nb: another with the error 0FL01 found that using another version of DOS solved this [fingers crossed]
atb
Law-II