Originally Posted by Xenturion
I just put an 8GB Kit (2x 4GB) in there of Corsair Dominator 1.5V 1866 RAM. It was the fastest kit my local Microcenter had that wasn't absurdly expensive. There were 2000 and 2133 kits but they were either 1.6V or 1.65V. After doing a little research and finding that there are massively differing opinions on the matter of using higher voltage kits on Sandy/Ivy Bridge, I figured I'd air on the side of caution and use a 1.5V kit.
I will check that out, there is an 8GB kit 1833mhz but its priced almost the same as the 16GB 1600mhz kit. :|