Quote:
Originally Posted by The3chosenone
All my fans are on max, and on stock settings my idel is 21c. Max load is like 35c. When I clicked the turbo button it was at 30+c idel and 65 max so I put it back to norm.
|
thats because the auto-overclocking(turbo) is pushing way to much voltage
(when you get your new psu in)
Set the CPU-core multi to 1.38(if it fails or is unstable you can try 1.42)
set the core-Multi to 20X
set the Nortbridge multi to 11
set the HT Muli to 11 or 2200Mhz
set the CPU-NB voltage to 1.20v
set the North-bridge(not the same as cpu-nb) voltage to 1.150
disable the following
CE1 state
Turbo boost
Cool and quiet
Spread spectrum
that should put the cpu @ 4Ghz and be stable enough to boot into windows
after you get it booted run either OCCT or Lin-pack on Medium for at least an hour
if it passes that you can bump the the multi to 22.5(4.5Ghz because 200x22.5=4500) and then run OCCT/prime95 or linpack for 2 hours ( if you had success at 4Ghz @ 1.38v you can go ahead and bump it to 1.42v)