Quote:
Originally Posted by red_stapler
I'm not having any luck with my 965BE C3. I've got it running at 3600 with 18x stock voltages, but I can't get anywhere with increased voltage. When stress testing at settings above 18x or 200mhz bus it will either BSOD or the system simply powers off. I had hoped it would be as simple as set multi to 20x and raise cpu voltage to 1.45. I've read through various guides and it seems like nothing is working as expected. I don't think the system has time to overheat since it happens almost immediately when i start load testing with prime or occt. Anything I should be looking at?
|
Could be that sirfa built powersupply you are running reaching its peak stable load. Unhappy voltages off the powersupply will cause what you described.