[Batou1986]

Originally Posted by Alcpone

I've got a 80mm fan blowing in from the case onto the chipset area, the NB gets hot even at stock and idle, I might get my digital thermometer out and have a probe about. I have only bumped the voltage up 1 notch in the bios, I did that only because OCCT came back with a error after 10-20 secs or so at 4.1Ghz, it still comes back with the error with the slight voltage increase but the system runs ok. Prime95 doesn't seem to stress all the cores for some reason?

correct AVX enabled Linpac works best on real multicore CPU i use occt as well because prime does jack squat i can run an hour of prime at 4.8ghz under 50* AVX linpac errors within minutes and hits near 60*.