[bogami]

Originally Posted by HumanSmoke

Most inbuilt dust filters are a PITA anyway. DEMCiflex are the way to go- especially if you are in a dusty environment. If the 900D is anything like the 800D, the machining tolerances aren't great anyway, so there are plenty of gaps for dust to penetrate. DEMCiflex will also build to order.

Personally, I pull my system down every six months for maintenance - blow out the rad w/ compressed air, flush with deionized water, clean/replace lines, check over O-rings etc., as well as general cleaning. Watercooled rigs are generally configured as negative pressure systems, so they tend to draw in dust fairly easily.

na trgu se je v zadnjem času pojavilo mnogo več izdelkov za zaščito pred prahom,in to sem omenil ker ni podano v osnovno ponudbo tudi na najdražjem sistemu .jaz svoj sistem do sedaj redno čistim vsake tri mesece .sem tudi močan kadilec in nikotin se zalepi na vse okoli .pred kratkom sem nabavil switch 810 . in vanj ugradil 3x140mm,2x140mm in 1x140mm EK radiatore.kako dougo bo zdrzal brez čišcenja bomo pa še videli .... 900$ je dober zaslužek za golo montažo .Stres test pa bo zdržal če je sestavljalec ve kaj dela .Možnosti nadgradnje so odprte a mnogi niti ne vedo kaj vse je potrebno dodati .pa brez zamere