techPowerUp! Forums - View Single Post - ASRock 939Dual-SATA2

Nov 8, 2005, 03:58 PM

Great job, Wizzard! This was a far beyond better review then "TweakTown.com". You didn't mention anything about the Ma Timing settings for your BH5 memory? You were stable @ 2-2-3-5 w/2T? I'm assuming 2T since that particular memory needs at least 3.4v to be stable at 1T @HIGH FSB. Beside when i didn't have my OCZ DDR BOOSTER, i set the vdimm to "HIGH" and i was stable at 2225-2T, not sure why you had problems with the third memory setting? So what do you think a Venice 3000+ only needs 1.45v to hit 2.5g? 278FSB x9 Multiplier, but for some reason i still have issues.

Note: I probably have to bring my Memory divider down again in order to hit 2.5g i think since my memory wasn't stable at any timings at DDR455 speeds. I've tested with Memtest86..TEST#5 errors like crazy...

Bios: 04XX
Stable @ 270x9=2430 w/1.45v
(166) @221MHz 2225-1T w/3.4v OCZ DDR BOOSTER
CPU-NB(600)

Nov 8, 2005, 03:58 PM	#2
Dynamic Guest Posts: n/a (0/day)	Great job, Wizzard! This was a far beyond better review then "TweakTown.com". You didn't mention anything about the Ma Timing settings for your BH5 memory? You were stable @ 2-2-3-5 w/2T? I'm assuming 2T since that particular memory needs at least 3.4v to be stable at 1T @HIGH FSB. Beside when i didn't have my OCZ DDR BOOSTER, i set the vdimm to "HIGH" and i was stable at 2225-2T, not sure why you had problems with the third memory setting? So what do you think a Venice 3000+ only needs 1.45v to hit 2.5g? 278FSB x9 Multiplier, but for some reason i still have issues. Note: I probably have to bring my Memory divider down again in order to hit 2.5g i think since my memory wasn't stable at any timings at DDR455 speeds. I've tested with Memtest86..TEST#5 errors like crazy... Bios: 04XX Stable @ 270x9=2430 w/1.45v (166) @221MHz 2225-1T w/3.4v OCZ DDR BOOSTER CPU-NB(600) Last edited by Dynamic; Nov 8, 2005 at 04:07 PM.