Taking a reg case and making it ROCK! - Page 22

Chicken Patty · Nov 10, 2008, 04:59 AM

Quote:

Originally Posted by MKmods

thanks CP...there is a much easier way to make a cool panel.
http://www.mnpctech.com/CarbonFiber_..._Titanium.html

If you go to You Tube there are a few tutorials
http://www.youtube.com/watch?v=J_gI3chGtww

so this is basically like a film. Gives it the look, just that it really ain't carbon fiber, correct?

MKmods · Nov 10, 2008, 05:05 AM

its just a sticker, but it looks pretty cool in person (MNPCTech sent me a piece to see) But its 100X cheaper and a lot less time consuming to use.

The Cello is the real thing

Wile E · Nov 10, 2008, 05:21 AM

Quote:

Originally Posted by MKmods

If you use the Koolance fluid rusting should be no prob. Most of the coolants have additives to prevent rust and reduce corrosion.
Thing is a lot of people use plain water (not the best for preventing rust)

It does seem a bit silly when all the other fittings are brass to save a few pennies by making 1 part out of steel.

Just having dissimilar metals in the same loop will cause oxidation over time, even with additives, as the metal start to react with each other.

And about not using clamps, be careful, even with you squeezing the smaller tubing on there, over time the tubing can lose some of it's elasticity, and can eventually leak.

Chicken Patty · Nov 10, 2008, 05:48 AM

Quote:

Originally Posted by MKmods

its just a sticker, but it looks pretty cool in person (MNPCTech sent me a piece to see) But its 100X cheaper and a lot less time consuming to use.

The Cello is the real thing

nice. Yeah but the im sure the sticker still looks cool bro.

Chicken Patty · Nov 10, 2008, 05:49 AM

Mark, Wile E is right about the tubing loosing elasticity. Be careful dude.

theJesus · Nov 10, 2008, 07:34 AM

That tray looks insanely awesome!

As for the tubing, does Mark even keep anything put together long enough for that to matter?

Wile E · Nov 10, 2008, 08:14 AM

Quote:

Originally Posted by theJesus

That tray looks insanely awesome!

As for the tubing, does Mark even keep anything put together long enough for that to matter?

lol. Probably not, but I thought I'd throw it out there anyway.

Wozzer · Nov 10, 2008, 08:21 AM

Can't wait until its finished !

MKmods · Nov 10, 2008, 06:50 PM

Quote:

Originally Posted by theJesus

That tray looks insanely awesome!

As for the tubing, does Mark even keep anything put together long enough for that to matter?

This one is a bit different, I promise to keep it together.

Quote:

Originally Posted by Chicken Patty

Mark, Wile E is right about the tubing loosing elasticity. Be careful dude.

Oh yee of little faith

SkyKast · Nov 10, 2008, 07:21 PM

hey that vinal is great for a drive bay or PSU when you dont want to make a carbon fiber case for it lol,

carbon fiber is too expensive to use for a "just for fun" project for me

but that mobo tray really looks sick

CyberDruid · Nov 10, 2008, 09:08 PM

I have to say that's a first for these eybulbs...it's perfectly beyond the call of duty

Having done a fair amount of fiberglas repair on boats I know just how ridiculous it is to make a single part from a mold...you've got a plan....doncha.

Vacuumbagging is just so pro...again

You have to have a perfect mold to get a perfect part...it really shows how much you love to mod

MKmods · Nov 10, 2008, 10:12 PM

LOL, it is a crazy amount of work just to make 1 part.

Once the comp is done I think it will make more sense, I can see it finished in my head and its pretty sweet.

Thanks CD.

theJesus · Nov 11, 2008, 02:31 AM

I get lots of ideas that look great in my head, but I lack your ability to make them come to life. And for that, I truly respect and envy you

edit: And you too CD

andrewsmc · Nov 11, 2008, 03:03 AM

This thread has so much useful info in it, It should be Stickied!

Chicken Patty · Nov 11, 2008, 03:48 AM

Quote:

Originally Posted by andrewsmc

This thread has so much useful info in it, It should be Stickied!

I agree, who else does?

SkyKast · Nov 11, 2008, 03:55 AM

i agree but it'll never happen

project logs end, something that ends wont get stickied

wish it could tho

Chicken Patty · Nov 11, 2008, 04:06 AM

Quote:

Originally Posted by SkyKast

i agree but it'll never happen

project logs end, something that ends wont get stickied

wish it could tho

yeah< i thought about that after my post. Oh well...

andrewsmc · Nov 11, 2008, 04:09 AM

Hm, I thought of it as more of a guide than a log.

SkyKast · Nov 11, 2008, 04:12 AM

Quote:

Originally Posted by andrewsmc

Hm, I thought of it as more of a guide than a log.

good point but so are others, and its in the "project log" section to share what you did

MKmods · Nov 11, 2008, 04:42 AM

so we just have to keep building then....

SkyKast · Nov 11, 2008, 04:43 AM

Quote:

Originally Posted by MKmods

so we just have to keep building then....

yep build away!

are you doing anything else in cf?

MKmods · Nov 11, 2008, 04:47 AM

The prob with CF is you need to make moulds for every part, that takes a ton of $$ and time. I will probably laminate a few parts (thin alum skin with CF on both sides). Maybe the Pump mount and DVD sides.
Right now I am waiting for my fittings and fiddling with the rear panel. I ordered the 5.25 ID tubing for the fans but its coming "slow boat from china" shipping by UPS.(wont get here till next week)

I am also thinking about switching PSs (I have a FSP 400 fanless one now) and I was thinking of using my PC Power & Cooling 510 but I need to make it fanless so my comp only uses 2 fans (for some reason I wanted to make a comp with 2 fans)

SkyKast · Nov 11, 2008, 05:00 AM

lol, I guess I can understand wanting overheated hardware....

eidairaman1 · Nov 11, 2008, 05:04 AM

that metal case does serve a purpose, heat reduction and EMI protection.

MKmods · Nov 11, 2008, 05:07 AM

Quote:

Originally Posted by SkyKast

lol, I guess I can understand wanting overheated hardware....

LOL, no way Jose..this comp is gonna run VERY cool (20-30C range)

(especially with the new Patented SkyKast exhaust vent/mesh)

Quote:

Originally Posted by eidairaman1

that metal case does serve a purpose, heat reduction and EMI protection.

Thats why I wear my trusty alum foil hat.

LOL, I modded that poor 510 PS so many times I have no clue where its cover is anymore...

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Nov 10, 2008, 05:05 AM	#527
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.47/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	its just a sticker, but it looks pretty cool in person (MNPCTech sent me a piece to see) But its 100X cheaper and a lot less time consuming to use. The Cello is the real thing __________________ Buy tin snips FIRST!

System Name:	Crossflow III
Processor:	AMD 965 (4.04Ghz)
Motherboard:	Asus Crosshair III
Cooling:	Air
Memory:	4 gigs Mushkin 7-7-7-20@1T
Video Card:	single 9800GT
Hard Disk:	Raptor 150's in Raid0
Optical Drive:	Plextor
CRT/LCD Model:	LG Flatron 24"
Case:	Custom
Sound Card:	AuzenTech X-Raider W/OP637
PSU:	Custom modded Corsair 750HX
Software:	Win 7 64/Solaris Utility
Benchmarks:	3DMark06--21963 so far

System Name:	The ClusterF**k
Processor:	980X @ 4212Mhz 24/7
Motherboard:	Gigabyte GA-EX58-UD5 BIOS F12
Cooling:	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory:	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24
Video Card:	Evga GTX 580
Hard Disk:	Seagate 7200.10 320GB x2 RAID0; 2 x Samsung F2 1.5TB; 1 x F1 1TB; 1 x F4 2TB
Optical Drive:	LG WH10LS30K 10X Blu-ray Burner
CRT/LCD Model:	HP LP2475w 24" 1920x1200 IPS
Case:	Technofront Bench Station
Sound Card:	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
PSU:	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software:	Win7 Ultimate N x64

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Nov 10, 2008, 05:49 AM	#530
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,887 (11.95/day) Thanks: 15,149 Thanked 12,309 Times in 7,775 Posts System Specs	Mark, Wile E is right about the tubing loosing elasticity. Be careful dude. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Nov 10, 2008, 07:34 AM	#531
theJesus Join Date: Jul 2008 Location: Canton, Ohio Posts: 3,116 (1.77/day) Thanks: 2,301 Thanked 865 Times in 612 Posts System Specs	That tray looks insanely awesome! As for the tubing, does Mark even keep anything put together long enough for that to matter? __________________ HEAT “congratulations! you have successfully been inflicted with tpuitis! symptons include: prolonged computer usage, urge to make tpu your homepage, posting at rapid posts-per-day ratios (also known as post whoring), and the urge to waste lots of money on high end computer hardware that you dont need!” -panchoman “Modding to me is something best shared with others.... Kind of like a fine wine, but without the drunk driving arrest and hangovers.” -MKmods “i'm going to punch you in the face now Jesus..” -BumbleBee

System Name:	BEHEMOTH
Processor:	Intel Core i5 2500-K @ 4.6ghz
Motherboard:	ASUS P8Z68-V
Cooling:	Corsair Hydro H100
Memory:	2x4gb Corsair Vengeance DDR3 1600 9-9-9-24 1.5v
Video Card:	EVGA GTX 560 Ti SuperClocked 950/1900/2100 core/shader/mem
Hard Disk:	Hitachi Deskstar 7K3000 2TB (OS/pro) \|\| 2x SAMSUNG EcoGreen F2 1.5TB RAID0 (storage)
Optical Drive:	Sony Optiarc AD-7240S-0B
CRT/LCD Model:	Samsung SyncMaster 2343BWX @2048x1152
Case:	Antec P280
Sound Card:	HRT MusicStreamer II+
PSU:	SeaSonic X650 Gold
Software:	Win7 Ultimate x64

Nov 10, 2008, 08:21 AM	#533
Wozzer Join Date: Jun 2008 Location: England Posts: 990 (0.56/day) Thanks: 166 Thanked 76 Times in 72 Posts System Specs	Can't wait until its finished !

System Name:	Wasleys PC
Processor:	Intel i5 2400 3.10GHz
Motherboard:	Asus P8z68-V
Cooling:	AC Freezer Pro
Memory:	Kingston 4GB (2x2GB) DDR3 Hyperx Memory
Video Card:	HIS ATi 6850 1GB DDR3
Hard Disk:	Seagate ST3500320AS 500GB Hard Drive SATA II 7200rpm 32MB Cache
Case:	Antec 900 with mods
Sound Card:	On Board
PSU:	OCZ Stealth Xtream 500W
Software:	Windows 7

Nov 10, 2008, 07:21 PM	#535
SkyKast Join Date: Oct 2008 Location: massachusetts Posts: 1,137 (0.68/day) Thanks: 476 Thanked 359 Times in 251 Posts System Specs	hey that vinal is great for a drive bay or PSU when you dont want to make a carbon fiber case for it lol, carbon fiber is too expensive to use for a "just for fun" project for me but that mobo tray really looks sick __________________ My First Mod, c'mon over - Have Our Team Make You A Custom Signature! - Check Out The Official GAU Site Graphic Artists United™ Artist “ if it's stupid but works, it's not stupid. ”

System Name:	VAN
Processor:	Intel Core 2 Quad Q9650 3.0GHz LGA 775 95W @ 3.0GHz
Motherboard:	ASUS P5Q Deluxe LGA 775 Intel P45 Intel Motherboard
Cooling:	Thermaltake SpinQ VT, front-rear-side 120mm, top-bottom 80mm red LED 1100 RPM@23dba fans
Memory:	Crucial Ballistix Tracer 8GB(2GBx4), DDR2, 800 MHz, 4-4-4-12, 2.0V, w/ LEDs
Video Card:	ATI/RADEON HD4870 1100/800
Hard Disk:	OCZ 60GB SSD (OS) - WD Cav. Black 640GB 7200 RPM 32MB Cache - Seagate 500GB 7200 (storage)
Optical Drive:	optical 16x CD/DVD RW
CRT/LCD Model:	DUAL 19" Samsung, LG LCDs
Case:	NZXT Lexa Blackline
Sound Card:	Realtek Onboard
PSU:	OCZ 600 Stealth-X-Stream 600W RT
Software:	Windows 7 Ultimate SP2

Nov 10, 2008, 09:08 PM	#536
CyberDruid Join Date: Sep 2007 Location: On top of a mountain Posts: 1,947 (0.94/day) Thanks: 818 Thanked 1,120 Times in 659 Posts System Specs	I have to say that's a first for these eybulbs...it's perfectly beyond the call of duty Having done a fair amount of fiberglas repair on boats I know just how ridiculous it is to make a single part from a mold...you've got a plan....doncha. Vacuumbagging is just so pro...again You have to have a perfect mold to get a perfect part...it really shows how much you love to mod __________________ returning to hibernation

System Name:	Shop Dog
Processor:	E8400
Motherboard:	Asus Blitz Formula SE
Cooling:	d-Tek FuZion
Memory:	2 x 2GB DDR2 800 G Skill
Video Card:	EVGA 7900 GTX
Hard Disk:	150GB VelociRaptor
Optical Drive:	LiteOn DVD Burner
CRT/LCD Model:	Acer 21.5 1080p LED Back Lit Monitor
Case:	Working on it
Sound Card:	PCI SoundMax
PSU:	Silverstone 750 Modular
Software:	XP Pro SP2
Benchmarks:	Super Pi 11.56s 1M at 4050mhz

Nov 10, 2008, 10:12 PM	#537
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.47/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	LOL, it is a crazy amount of work just to make 1 part. Once the comp is done I think it will make more sense, I can see it finished in my head and its pretty sweet. Thanks CD. __________________ Buy tin snips FIRST!

Nov 11, 2008, 02:31 AM	#538
theJesus Join Date: Jul 2008 Location: Canton, Ohio Posts: 3,116 (1.77/day) Thanks: 2,301 Thanked 865 Times in 612 Posts System Specs	I get lots of ideas that look great in my head, but I lack your ability to make them come to life. And for that, I truly respect and envy you edit: And you too CD __________________ HEAT “congratulations! you have successfully been inflicted with tpuitis! symptons include: prolonged computer usage, urge to make tpu your homepage, posting at rapid posts-per-day ratios (also known as post whoring), and the urge to waste lots of money on high end computer hardware that you dont need!” -panchoman “Modding to me is something best shared with others.... Kind of like a fine wine, but without the drunk driving arrest and hangovers.” -MKmods “i'm going to punch you in the face now Jesus..” -BumbleBee

Nov 11, 2008, 03:03 AM	#539
andrewsmc Join Date: Sep 2008 Location: Pikeville NC Posts: 821 (0.48/day) Thanks: 191 Thanked 68 Times in 59 Posts System Specs	This thread has so much useful info in it, It should be Stickied! __________________ Heat = http://www.heatware.com/eval.php?id=68277 Ebay = http://myworld.ebay.com/andrewsmclor

System Name:	In the works
Processor:	I5 2500K@4.5Ghz 24/7 with H60 Hydro
Motherboard:	BIOSTAR TZ77XE3
Cooling:	5x120mm
Memory:	16GB Sniper Gskill 1833
Video Card:	PNY 550Ti OC2
Hard Disk:	1x-120GB Vector3 SSD 1x- 120GB Mushkin Chronos
Optical Drive:	ASUS 24X DVD Burner
CRT/LCD Model:	27" Acer 1920x1080
Case:	Corsair Carbide 200R
PSU:	OCZ Power 600W Modular
Software:	Win7 & Win8

Nov 11, 2008, 03:55 AM	#541
SkyKast Join Date: Oct 2008 Location: massachusetts Posts: 1,137 (0.68/day) Thanks: 476 Thanked 359 Times in 251 Posts System Specs	i agree but it'll never happen project logs end, something that ends wont get stickied wish it could tho __________________ My First Mod, c'mon over - Have Our Team Make You A Custom Signature! - Check Out The Official GAU Site Graphic Artists United™ Artist “ if it's stupid but works, it's not stupid. ”

Nov 11, 2008, 04:09 AM	#543
andrewsmc Join Date: Sep 2008 Location: Pikeville NC Posts: 821 (0.48/day) Thanks: 191 Thanked 68 Times in 59 Posts System Specs	Hm, I thought of it as more of a guide than a log. __________________ Heat = http://www.heatware.com/eval.php?id=68277 Ebay = http://myworld.ebay.com/andrewsmclor

Nov 11, 2008, 04:42 AM	#545
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.47/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	so we just have to keep building then.... __________________ Buy tin snips FIRST!

Nov 11, 2008, 04:47 AM	#547
MKmods Case Mod Guru Join Date: Feb 2008 Location: Nevada Posts: 4,711 (2.47/day) Thanks: 2,879 Thanked 1,766 Times in 1,364 Posts System Specs	The prob with CF is you need to make moulds for every part, that takes a ton of $$ and time. I will probably laminate a few parts (thin alum skin with CF on both sides). Maybe the Pump mount and DVD sides. Right now I am waiting for my fittings and fiddling with the rear panel. I ordered the 5.25 ID tubing for the fans but its coming "slow boat from china" shipping by UPS.(wont get here till next week) I am also thinking about switching PSs (I have a FSP 400 fanless one now) and I was thinking of using my PC Power & Cooling 510 but I need to make it fanless so my comp only uses 2 fans (for some reason I wanted to make a comp with 2 fans) __________________ Buy tin snips FIRST!

Nov 11, 2008, 05:00 AM	#548
SkyKast Join Date: Oct 2008 Location: massachusetts Posts: 1,137 (0.68/day) Thanks: 476 Thanked 359 Times in 251 Posts System Specs	lol, I guess I can understand wanting overheated hardware.... __________________ My First Mod, c'mon over - Have Our Team Make You A Custom Signature! - Check Out The Official GAU Site Graphic Artists United™ Artist “ if it's stupid but works, it's not stupid. ”

Nov 11, 2008, 05:04 AM	#549
eidairaman1 Eligible for custom title Join Date: Jul 2007 Location: HTX Posts: 10,076 (4.69/day) Thanks: 1,359 Thanked 1,159 Times in 1,035 Posts System Specs	that metal case does serve a purpose, heat reduction and EMI protection. __________________ Athlon XP USERS with COD 4 FIX http://www.techsupportforum.com/foru...ls-202011.html http://www.howorks.com/2011/02/24/ho...-memory-limit/ “Sometimes my level of fail is unprecedented.” -TheMailMan78 “This is what the force of a thousand suns looks like.” -3870x2

System Name:	BS03/04
Processor:	AMD Athlon XP-M 2500+ 2.2GHz 1.5V
Motherboard:	DFI LanParty NFII Ultra-B Bios (TicTac 3D Fire R2)
Cooling:	4 Antec 80mm, TR SI-97 Adapted TT Big Typhoon Fan 120MM
Memory:	2GB Mushkin Redline 4000 @ 200 MHz 2.5V
Video Card:	Sapphire R1950Pro 512MB AGP 1.5V
Hard Disk:	250 & 400 GB Seagate Baracuda 10 SATA
Optical Drive:	2x Samsung Multiformat Rewritable Drives
CRT/LCD Model:	NEC Multisync LCD 1700V
Case:	Antec SX830 EATX Case
Sound Card:	Creative Labs SB XFi Xtreme Music & SB PCI 512
PSU:	Antec NEO HE 500 Watt
Software:	Windows 7 Home Premium
Benchmarks:	Win 7 Eval. CPU 3.9 Ram 4.5 Graphics 6.0 HD 5.7

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermaltake Lanbox	Darksaber	Reviews	15	Oct 9, 2008 10:18 PM
Gigabyte 3DMercury	Frederik S	Reviews	5	Apr 7, 2008 08:30 PM
Sunbeam UFO Acrylic Case	t_ski	Reviews	1	Oct 3, 2007 03:59 PM
Moneual LAB MonCaso 932 HTPC enclosure	Darksaber	Reviews	0	Mar 30, 2007 10:37 AM
Thermaltake Tai-Chi	Urlyin	Reviews	8	Jun 24, 2006 02:51 AM