Force3d HD 4850 Problem

Shahryar_NEO · Feb 10, 2009, 01:55 PM

i've got a Force3D 4850 with accelero cooler yesterday and i've downloaded Catalyst 9.1 . yesterday i played about 2 hours GTA IV and got VPU Recover error ( OC To 690 , 1200 Mhz ) . but today i want to play @ Default clocks ( 625 , 993 mhz ) i couldn't ! got VPU Recover Error . i disable it but it crashes a lot . it got me a don't send error and ... . but temperatures not big enough for crashes ! ( 47C for GPU Core , 50C For MemCore And 55 on game for Shadercore ! )

i'm running on a 885W Real power so i don't think the problem is power or overclocking and temp ! something that is so interesting is before crash on GTA My car flying or i couldn't walk and ... ! what's the problem ?!

Thanks

Shahryar

francis511 · Feb 10, 2009, 02:37 PM

What is the oc on your processor ?

kiriakost · Feb 10, 2009, 03:27 PM

Before you say anything more , post a picture of the card with the cooler.

Shahryar_NEO · Feb 10, 2009, 06:17 PM

Quote:

Originally Posted by francis511

What is the oc on your processor ?

3750 mhz on E5200 . it's my 24/7 Profile . ( i used this profile with 8400GS for more than 1 month ! )

it's some how like this with additional cooling :

but temp is not the problem .

kiriakost · Feb 10, 2009, 06:19 PM

Quote:

Originally Posted by Shahryar_NEO

it's some how like this with additional cooling

I like to see the real thing , so to see what you did wrong.

TheMailMan78 · Feb 10, 2009, 06:24 PM

Thats not being helpful kiriakost....

Anyway Shahryar_NEO welcome aboard. How did you install the 9.1 drivers? Also do you have a GPU on your board? One big thing that helps us trouble shoot problems is knowing the specs of your system. Would you mind posting them?

Shahryar_NEO · Feb 11, 2009, 10:14 AM

Full Spec :

CPU : Intel E5200 @ 3.75 Ghz
MB : DFI DK P45 T2RS-Plus ( tested on Rampage Extreme And UD3R )
Graphic : Force3D Radeon 4850
Memory : 2*1 Crucial Ballistix B800 4-4-4-12 @ 1200 5-5-5-15
Monitor : LG W1952S ( 1440*900 res )

an important thing is i've a nvidia 8400GS on this system . it might be a IRC conflict .

inf3rno · Feb 11, 2009, 11:42 AM

Two questions first from where do you belong? I mean your location.

and did you try to make contact with force3d support center?

Otherwise AFAIK VPU recovery error happens due to clock speed changing. When you run your card on default clocks does your card use ATI powerplay or not?

Shahryar_NEO · Feb 11, 2009, 12:51 PM

Quote:

Originally Posted by inf3rno

Two questions first from where do you belong? I mean your location.

and did you try to make contact with force3d support center?

Otherwise AFAIK VPU recovery error happens due to clock speed changing. When you run your card on default clocks does your card use ATI powerplay or not?

i'm from IRAN . no i don't try to contact Force3D ...

at first this happened when i OC my card but now it's for default clocks . ATI Powerplay ?! no maybe not ( it's 48XX series ! )

ShadowFold · Feb 11, 2009, 01:23 PM

Clean out the NV and ATi drivers and reinstall the ATi ones.

TheMailMan78 · Feb 11, 2009, 02:02 PM

Quote:

Originally Posted by ShadowFold

Clean out the NV and ATi drivers and reinstall the ATi ones.

This is good advice. To properly do this follow these directions

Or you can use a driver cleaner like the ones in our download section. FYI be sure to use a driver cleaner only in safe mode.

Also since you now have a dedicated GPU you might want to disable the IGP in the bios. This can also cause VPU errors. It doesn't matter if its ATI or Nvidia. They are both guilty of this.

Shahryar_NEO · Feb 11, 2009, 02:59 PM

Quote:

Originally Posted by TheMailMan78

This is good advice. To properly do this follow these directions

Or you can use a driver cleaner like the ones in our download section. FYI be sure to use a driver cleaner only in safe mode.

Also since you now have a dedicated GPU you might want to disable the IGP in the bios. This can also cause VPU errors. It doesn't matter if its ATI or Nvidia. They are both guilty of this.

i'll try this . by the way DK P45 T2RS Plus doesn't have onboard graphic !

TheMailMan78 · Feb 11, 2009, 03:16 PM

Quote:

Originally Posted by Shahryar_NEO

i'll try this . by the way DK P45 T2RS Plus doesn't have onboard graphic !

So you have a separate 8400GS also installed on this system? Or did you have one installed before? I don't understand.

Shahryar_NEO · Feb 11, 2009, 03:20 PM

Quote:

Originally Posted by TheMailMan78

So you have a separate 8400GS also installed on this system? Or did you have one installed before? I don't understand.

it's not possible to use crossfire with 8400GS and 4850 ! so it's only a 4850 now but before i used 8400GS

DRDNA · Feb 11, 2009, 03:23 PM

Quote:

Originally Posted by TheMailMan78

This is good advice. To properly do this follow these directions

FYI be sure to use a driver cleaner only in safe mode.

.

Why safe mode?

TheMailMan78 · Feb 11, 2009, 04:01 PM

Quote:

Originally Posted by Shahryar_NEO

it's not possible to use crossfire with 8400GS and 4850 ! so it's only a 4850 now but before i used 8400GS

I didn't say it was. But that didn't mean you didn't have two cards installed. Anyway if you had another an Nvidia card in there before than you defiantly need to do a good cleaning of the registry. Personally I always redo my whole OS when I change brands like that. Its not necessary however. I just like to play it safe

Quote:

Originally Posted by DRDNA

Why safe mode?

Read the directions man! It does a far better cleaning in safe mode. It can't delete registry entries if they are in use. Here read this.

DRDNA · Feb 11, 2009, 04:32 PM

Quote:

Originally Posted by TheMailMan78

I didn't say it was. But that didn't mean you didn't have two cards installed. Anyway if you had another an Nvidia card in there before than you defiantly need to do a good cleaning of the registry. Personally I always redo my whole OS when I change brands like that. Its not necessary however. I just like to play it safe

Read the directions man! It does a far better cleaning in safe mode. It can't delete registry entries if they are in use. Here read this.

lol ...okay OS safe mode ...I see.... Directions what are they ...I live in america where directions are the last thing you do ...lol

Shahryar_NEO · Feb 11, 2009, 05:10 PM

i do all of the works . and after that start playing @ 645 / 1050 Mhz and after 20M playing in GTA IV it hangs and get me don't send error

i really don't know why !

TheMailMan78 · Feb 11, 2009, 05:37 PM

Quote:

Originally Posted by Shahryar_NEO

i do all of the works . and after that start playing @ 645 / 1050 Mhz and after 20M playing in GTA IV it hangs and get me don't send error

i really don't know why !

What kind of PSU are you using out of curiosity? Also set everything including the bios back to default.

Quote:

Originally Posted by DRDNA

lol ...okay OS safe mode ...I see.... Directions what are they ...I live in america where directions are the last thing you do ...lol

I'm from Miami. So its not really America I guess

kiriakost · Feb 11, 2009, 05:38 PM

Quote:

Originally Posted by Shahryar_NEO

i do all of the works . and after that start playing @ 645 / 1050 Mhz and after 20M playing in GTA IV it hangs and get me don't send error

i really don't know why !

Do not worry the doctor TheMailMan78 will rescue you ...

As about me , i am still waiting to see the picture "VGA heatsink" ..
If possible ........

TheMailMan78 · Feb 11, 2009, 05:40 PM

Quote:

Originally Posted by kiriakost

Do not worry the doctor TheMailMan78 will rescue you ...

I sure hope that isn't sarcasm.

kiriakost · Feb 11, 2009, 05:41 PM

100 % Genuine One ..

Shahryar_NEO · Feb 11, 2009, 05:42 PM

Quote:

Originally Posted by TheMailMan78

What kind of PSU are you using out of curiosity? Also set everything including the bios back to default.

I'm from Miami. So its not really America I guess

PSU :

http://www.green-case.com/products/p...p?model=gp885b

i'll try anything @ default but i think it's good to change .

Quote:

Originally Posted by kiriakost

Do not worry the doctor TheMailMan78 will rescue you ...

As about me , i am still waiting to see the picture "VGA heatsink" ..
If possible ........

i link my picture of my card so you could see my card heatsink !

kiriakost · Feb 11, 2009, 05:46 PM

Quote:

Originally Posted by Shahryar_NEO

i link my picture of my card so you could see my card heatsink !

Ok side way view .... i need to see ramsinks and FET

TheMailMan78 · Feb 11, 2009, 05:49 PM

Quote:

Originally Posted by Shahryar_NEO

PSU :

http://www.green-case.com/products/p...p?model=gp885b

i'll try anything @ default but i think it's good to change .

Iv never heard of "Green" PSU. Do you have anything else on hand that could you use?

Also do not underestimate OCing a system. Some systems do not take to OCing well. Default may be your only choice.

Feb 10, 2009, 01:55 PM	#1
Shahryar_NEO Join Date: Feb 2009 Posts: 13 (0.01/day) Thanks: 7 Thanked 0 Times in 0 Posts System Specs	Force3d HD 4850 Problem i've got a Force3D 4850 with accelero cooler yesterday and i've downloaded Catalyst 9.1 . yesterday i played about 2 hours GTA IV and got VPU Recover error ( OC To 690 , 1200 Mhz ) . but today i want to play @ Default clocks ( 625 , 993 mhz ) i couldn't ! got VPU Recover Error . i disable it but it crashes a lot . it got me a don't send error and ... . but temperatures not big enough for crashes ! ( 47C for GPU Core , 50C For MemCore And 55 on game for Shadercore ! ) i'm running on a 885W Real power so i don't think the problem is power or overclocking and temp ! something that is so interesting is before crash on GTA My car flying or i couldn't walk and ... ! what's the problem ?! Thanks Shahryar

System Name:	Perspolis
Processor:	Intel E5200 @ 4200 Mhz 24/7 On IFX-14 \| E8500 @ 4300 Mhz 24/7 On IFX-14
Motherboard:	DFI DK P45 T2RS-Plus \| GA-EP45-UD3R
Cooling:	IFX-14
Memory:	Crucial Ballistix PC2-6400 @ 1200 Mhz 5-5-5-15 @ 2.15v
Video Card:	Force3D 4850 \| GeForce 8400GS @ 650 / 550 Mhz
Hard Disk:	MaXtor DiamondMaX 22 500GB
Optical Drive:	Suzuki SB-120A
CRT/LCD Model:	LG W1952S
Case:	No Case !
PSU:	Green 885B
Software:	OS : Win2K3 Moded \| Win XP SP3 Moded \| Windows 7 Beta \| Windows XP SP3 For Normal Works
Benchmarks:	http://hwbot.org/user.do?userId=10854

Feb 10, 2009, 02:37 PM	#2
francis511 Join Date: Oct 2006 Location: N.Ireland Posts: 2,363 (0.98/day) Thanks: 145 Thanked 277 Times in 257 Posts System Specs	What is the oc on your processor ? __________________

Processor:	Core I5 750
Motherboard:	MSI P55-A FUZION
Cooling:	Titan Fenrir
Memory:	8 gb Hyper X 1600
Video Card:	Geforce GTX 275
Hard Disk:	OCZ Vertex 2 40g SSD /74g Raptor /1 TB samsung F3 /320g suxxor (Maxtor)
Optical Drive:	USB dvd-rw
CRT/LCD Model:	Viewsonic VX2260wm
Case:	Xigmatek midgard
Sound Card:	X-fi Titanium
PSU:	Corsair 950 w (Hur Hur !)
Software:	Windows se7en

System Name:	ATLAS
Processor:	Q6600 QUAD
Motherboard:	ASUS P5QC
Cooling:	ProlimaTech Armageddon
Memory:	HYPER-X KHX1600C8D3T1K2 /4GX PC3-12800 1600MHz
Video Card:	Sapphire HD 5770 VAPOR-X
Hard Disk:	Raptors 73Gb - Raid1
Optical Drive:	Plextor 4012TA_ Samsung SH202N
CRT/LCD Model:	DELL U2311H
Case:	HEC Special moded ..
Sound Card:	X-Fi Music + mods Audigy front Panel (full working)
PSU:	HIPER 4M780 PE 980W Peak
Software:	XP PRO SP3

Feb 10, 2009, 03:27 PM	#3
kiriakost Join Date: Dec 2008 Location: Volos, Greece Posts: 848 (0.53/day) Thanks: 30 Thanked 72 Times in 65 Posts System Specs	Before you say anything more , post a picture of the card with the cooler.

Feb 10, 2009, 06:24 PM	#6
TheMailMan78 Banstick Dummy Join Date: Jun 2007 Location: Crystal River, FL Posts: 15,109 (6.93/day) Thanks: 1,337 Thanked 6,829 Times in 3,739 Posts System Specs	Thats not being helpful kiriakost.... Anyway Shahryar_NEO welcome aboard. How did you install the 9.1 drivers? Also do you have a GPU on your board? One big thing that helps us trouble shoot problems is knowing the specs of your system. Would you mind posting them?

System Name:	The Mailbox 3.5
Processor:	Intel i7 2600k @ 3.8GHz
Motherboard:	ASUS Maximus IV Gene-Z
Cooling:	Stock
Memory:	G.SKILL Sniper Series 8GB DDR3 1866: 9-9-9-24
Video Card:	EVGA GTX670 "FTW" Edition @ 1006MHz
Hard Disk:	256gb M4 SSD, 500Gb WD (7200)
Optical Drive:	LG - 24x Double-Layer DVD±RW/CD-RW Drive
CRT/LCD Model:	24" ASUS 1920 x 1080
Case:	Cooler Master 922 HAF
Sound Card:	SupremeFX X-Fi 2 with Bose Companion 2 speakers.
PSU:	SeaSonic X Series X650 Gold
Software:	Windows 8 Pro w/Media Center 64bit
Benchmarks:	Benching is for bitches.

Feb 11, 2009, 10:14 AM	#7
Shahryar_NEO Join Date: Feb 2009 Posts: 13 (0.01/day) Thanks: 7 Thanked 0 Times in 0 Posts System Specs	Full Spec : CPU : Intel E5200 @ 3.75 Ghz MB : DFI DK P45 T2RS-Plus ( tested on Rampage Extreme And UD3R ) Graphic : Force3D Radeon 4850 Memory : 21 Crucial Ballistix B800 4-4-4-12 @ 1200 5-5-5-15 Monitor : LG W1952S ( 1440900 res ) an important thing is i've a nvidia 8400GS on this system . it might be a IRC conflict .

Feb 11, 2009, 11:42 AM	#8
inf3rno Join Date: Nov 2008 Posts: 406 (0.25/day) Thanks: 56 Thanked 41 Times in 39 Posts System Specs	Two questions first from where do you belong? I mean your location. and did you try to make contact with force3d support center? Otherwise AFAIK VPU recovery error happens due to clock speed changing. When you run your card on default clocks does your card use ATI powerplay or not? __________________ Games Playing Team Fortress 2 CS:S COD:MW2

System Name:	Mean Machine
Processor:	AMD Phenom II X4 955
Motherboard:	MSI 785GTM-E45
Cooling:	Stock Cooling
Memory:	Corsair XMS2 DHX 2 X 2Gigs
Video Card:	HIS ICQ4 4850 @ 685/2200
Hard Disk:	WD Cavier SEII 3200AAKS 320 GB and Seagate 500 GB
Optical Drive:	ASUS DVD ROM 16X / ASUS DVDRW Sata
CRT/LCD Model:	HP X22 LED
Case:	Generic
Sound Card:	Creative Sound Blaster Audigy
PSU:	Cooler Master Real Power Pro 650W
Software:	Pro/E, Delcam Powermill, These things just for work.

Feb 11, 2009, 01:23 PM	#10
ShadowFold Eligible for custom title Join Date: Dec 2007 Location: Omaha, NE Posts: 12,855 (6.50/day) Thanks: 1,381 Thanked 1,681 Times in 1,498 Posts System Specs	Clean out the NV and ATi drivers and reinstall the ATi ones.

System Name:	The ShadowFold Draconis (Ordering soon)
Processor:	AMD Phenom II X6 1055T 2.8ghz
Motherboard:	ASUS M4A87TD EVO AM3 AMD 870
Cooling:	Stock
Memory:	Kingston ValueRAM 4GB DDR3-1333
Video Card:	XFX ATi Radeon HD 5850 1gb
Hard Disk:	Western Digital 640gb
Optical Drive:	LG DVD Burner SATA
CRT/LCD Model:	Acer 21.5" 5ms Full HD 1920x1080P
Case:	Antec Nine-Hundred
Sound Card:	Onboard + Creative "Fatal1ty" Headset
PSU:	Antec Earthwatts 650w
Software:	Windows 7 Home Premium 64bit
Benchmarks:	-❶-❸-❸-❼-

System Name:	http://www.heatware.com/eval.php?id=73751
Processor:	i7-920 CO@4.2GHZ
Motherboard:	Asus P6T Deluxe Intel X58
Cooling:	Asetek Liquid CPU Cooling System
Memory:	CORSAIR DOMINATOR 6GB (3 x 2GB) DDR3 1600
Video Card:	2X ATI Radeon HD 4870 X2 2GB DDR5 PCI-Express
Hard Disk:	(RAID-0) with 4 Identical Hard Drives (1.28TB (320GBx4)
Optical Drive:	LG BLU-RAY/HD-DVD Reader / DVD±R/±RW Writer
CRT/LCD Model:	LG 50" 50PK550 1080p 600Hz Plasma/37 Inch WestingHouse @1920x1080
Case:	Thermaltake M9 (I hate it its like trying to live in a 1 inch box)
PSU:	ThermalTake ToughPower 1200 Watt
Software:	Windows 7 professional 64

Feb 11, 2009, 05:10 PM	#18
Shahryar_NEO Join Date: Feb 2009 Posts: 13 (0.01/day) Thanks: 7 Thanked 0 Times in 0 Posts System Specs	i do all of the works . and after that start playing @ 645 / 1050 Mhz and after 20M playing in GTA IV it hangs and get me don't send error i really don't know why !

Feb 11, 2009, 05:41 PM	#22
kiriakost Join Date: Dec 2008 Location: Volos, Greece Posts: 848 (0.53/day) Thanks: 30 Thanked 72 Times in 65 Posts System Specs	100 % Genuine One ..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with 4850 and monitor	r9	AMD / ATI	0	Feb 6, 2009 09:58 PM
BSOD Problem	Scythez0r	General Hardware	1	Jan 20, 2009 05:46 AM
Problem with Sapphire 4850 1g	Delta6326	AMD / ATI	0	Jan 8, 2009 02:46 PM
Palit Releases Radeon HD 4850 1GB Sonic	btarunr	News	30	Nov 17, 2008 08:03 AM
Sapphire HD 4850 512 MB Own PCB Design	W1zzard	Reviews	6	Sep 18, 2008 11:54 AM