![]() |
|
|
#1 |
|
Benevolent Dictator
Join Date: May 2004
Location: Stuttgart, Germany
Posts: 13,789 (4.18/day)
Thanks: 184
Thanked 10,270 Times in 3,173 Posts
|
ASUS launches P6X58 Premium with SATA 6 Gb/s Support
At the booth of ASUS we found a motherboard that supports the brand-new SATA 6 Gbit/s standard that was released just a few days ago. ASUS prepared a running demo that showcases the performance differences between SATA-II and SATA-III.
![]() The main improvement of SATA III is that it doubles the available bandwidth again, to reach 6 Gbit/s. While no current mechanical harddrives can reach such speeds, there are several SSDs out there that can saturate a 3 Gb/s link. Other improvements include an optional smaller connector for 1.8" devices and improvements to Native Command Queuing (NCQ). By the way, the official name is "SATA 6 Gbit/s", not "SATA III" or "SATA 3.0", yes I know I got it wrong in this post. Edit Jun 02: I got you those screenshots with the performance numbers. As you can see the HDTach benchmark shows a burst speed of over 300 MB/s which is evidence that SATA 6 Gb is working on that motherboard. Due to the HDD used (Seagate ST3500410AS) the actual read bandwidth is far below that because the HDD is just too slow to even saturate SATA-II. Another novely on this motherboard is support for the USB 3.0 standard. Since the chipset does not offer USB 3.0 support, ASUS has chosen to use an NEC 720200 USB 3.0 interface chip. Last edited by W1zzard; Jun 2, 2009 at 01:55 PM. |
|
|
|
| The Following User Says Thank You to W1zzard For This Useful Post: |
|
|
#2 |
![]() Join Date: Sep 2008
Location: Weedopia
Posts: 1,169 (0.68/day)
Thanks: 114
Thanked 187 Times in 143 Posts
|
Awesome! Faster transfer rates FTW! We have to wait for the other hardware to catch up FTL! Great to see technology advancing nonetheless.
__________________
|
|
|
|
|
|
#3 |
![]() Join Date: Feb 2009
Location: Durban, South Africa
Posts: 2,902 (1.86/day)
Thanks: 372
Thanked 313 Times in 277 Posts
|
Can't wait till it goes mainstream
__________________
Steam ID
![]() ^^Join The club!! click the red x^^ WCG TPU avatar Request thread www.h3llb3nd4.deviantart.com |
|
|
|
|
|
#4 |
![]() Join Date: Mar 2009
Location: Philippines
Posts: 3,424 (2.22/day)
Thanks: 42
Thanked 1,132 Times in 713 Posts
|
What's a water bottle doing there?
__________________
MSI P67A-GD65 (B3), Intel Core i5 2500K, Corsair H60, 2x MSI GTX 570 Twin Frozr II/OC, G.Skill RipjawsX (2x4GB) DDR3-1600 RAM, OCZ Agility 3 120GB + 2TB, Corsair AX1200, Corsair Carbide 400R MSI Z68MA-ED55, i5 2500K, Noctua NH-U9B SE2, Inno3D GTX 570, Corsair Vengeance LP 8GB, OCZ Agility 3 120GB + 1TB, Seasonic X660, Lian Li PC-V600FB The Big Useful List of Free Useful Programs To Use Usually For Free |
|
|
|
|
|
#5 |
|
Benevolent Dictator
Join Date: May 2004
Location: Stuttgart, Germany
Posts: 13,789 (4.18/day)
Thanks: 184
Thanked 10,270 Times in 3,173 Posts
|
|
|
|
|
|
|
#6 |
![]() Join Date: Feb 2009
Location: Durban, South Africa
Posts: 2,902 (1.86/day)
Thanks: 372
Thanked 313 Times in 277 Posts
|
Really? you lucky buggers...:P
__________________
Steam ID
![]() ^^Join The club!! click the red x^^ WCG TPU avatar Request thread www.h3llb3nd4.deviantart.com |
|
|
|
|
|
#7 |
![]() Join Date: Feb 2006
Location: Wash DC
Posts: 271 (0.10/day)
Thanks: 0
Thanked 12 Times in 11 Posts
|
Unfortunately you were too far away to really take a look at the performance numbers?? But close enough to take a picture?
__________________
|
|
|
|
|
|
#8 |
![]() Join Date: Oct 2007
Location: Europe
Posts: 78 (0.04/day)
Thanks: 0
Thanked 2 Times in 2 Posts
|
No USB 3.0? LAME....
|
|
|
|
|
|
#9 |
![]() Join Date: Sep 2008
Location: Weedopia
Posts: 1,169 (0.68/day)
Thanks: 114
Thanked 187 Times in 143 Posts
|
lol, i thought to myself " he is right, now my printer wont print any faster
" hahaha J/K
__________________
|
|
|
|
|
|
#10 |
![]() |
bottow wata not incrudeh
__________________
|
|
|
|
|
|
#11 |
|
Benevolent Dictator
Join Date: May 2004
Location: Stuttgart, Germany
Posts: 13,789 (4.18/day)
Thanks: 184
Thanked 10,270 Times in 3,173 Posts
|
|
|
|
|
|
|
#12 |
![]() Join Date: Feb 2006
Location: Wash DC
Posts: 271 (0.10/day)
Thanks: 0
Thanked 12 Times in 11 Posts
|
You couldnt have taken 10 steps closer?
__________________
|
|
|
|
|
|
#13 | |
|
To infinity ... and beyond!
Join Date: Dec 2006
Location: H-Town Texas
Posts: 6,780 (2.88/day)
Thanks: 1,031
Thanked 852 Times in 581 Posts
|
Quote:
__________________
|
|
|
|
|
|
|
#14 |
|
Bird of Prey
Join Date: Jul 2006
Location: Gurley, AL
Posts: 9,994 (3.98/day)
Thanks: 3,810
Thanked 557 Times in 521 Posts
|
Nice try on the numbers W1zz. That board looks killer to be sure.
__________________
=-TheEagle-= ![]() http://www.heatware.com/eval.php?id=62454 “You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120 - Edited for content and clarity
|
|
|
|
|
|
#15 |
![]() Join Date: Feb 2009
Location: Durban, South Africa
Posts: 2,902 (1.86/day)
Thanks: 372
Thanked 313 Times in 277 Posts
|
__________________
Steam ID
![]() ^^Join The club!! click the red x^^ WCG TPU avatar Request thread www.h3llb3nd4.deviantart.com |
|
|
|
|
|
#16 |
![]() Join Date: Apr 2006
Location: New Sewickley, PA
Posts: 455 (0.18/day)
Thanks: 92
Thanked 78 Times in 56 Posts
|
Copying 1 item 6.18GB 54 seconds. (from what I can make out)
Thats about 1 GB every 10 seconds so yes, thats about 6Gb per second of throughput. (bear in mind that Gb is a gigabit which is 1/8 of a gigabyte.) Edit: Feel free to check my math, I just did it quickly in my head.
__________________
|
|
|
|
|
|
#17 | |
![]() Join Date: Feb 2006
Location: Wash DC
Posts: 271 (0.10/day)
Thanks: 0
Thanked 12 Times in 11 Posts
|
Quote:
__________________
|
|
|
|
|
|
|
#18 |
|
Guest
Posts: n/a (0/day)
|
You don't need to read it just tink about it.
6Gbit/sec is about 768MByte/sec, You can sea in the picture that the copy is about to finish in a minute or so. And it is readable that 1file(item) is under copy, the copy is about to finish and 54sec*768MB/s is 46080MB so 45GB of something maybe a bit bigger or smaller because it is a theoretical full speed what it can do! Maybee they copying 2 Blueray discs or something. |
|
|
|
#19 |
|
Guest
Posts: n/a (0/day)
|
That's not 3Gb Sata That is "Sata 3G" so 3rd Generation!
|
|
|
|
#20 |
![]() Join Date: Feb 2006
Location: Wash DC
Posts: 271 (0.10/day)
Thanks: 0
Thanked 12 Times in 11 Posts
|
Then whats Sata 6G? 6th generation?
__________________
|
|
|
|
|
|
#21 |
![]() Join Date: Feb 2009
Location: Durban, South Africa
Posts: 2,902 (1.86/day)
Thanks: 372
Thanked 313 Times in 277 Posts
|
__________________
Steam ID
![]() ^^Join The club!! click the red x^^ WCG TPU avatar Request thread www.h3llb3nd4.deviantart.com |
|
|
|
|
|
#22 |
![]() Join Date: Feb 2006
Location: Wash DC
Posts: 271 (0.10/day)
Thanks: 0
Thanked 12 Times in 11 Posts
|
__________________
|
|
|
|
|
|
#23 |
![]() Join Date: Feb 2009
Location: Durban, South Africa
Posts: 2,902 (1.86/day)
Thanks: 372
Thanked 313 Times in 277 Posts
|
__________________
Steam ID
![]() ^^Join The club!! click the red x^^ WCG TPU avatar Request thread www.h3llb3nd4.deviantart.com |
|
|
|
|
|
#24 |
|
Guest
Posts: n/a (0/day)
|
Sata 6G would be 6th generation but that would be 48Gbit/sec(6444MByte/sec) and in the year of 2022 or so!
|
|
|
|
#25 |
![]() Join Date: Feb 2006
Location: Wash DC
Posts: 271 (0.10/day)
Thanks: 0
Thanked 12 Times in 11 Posts
|
Good thing we dont have to wait till 2022, its already here.
__________________
|
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ASUS A8R32-MVP Deluxe | W1zzard | Reviews | 11 | Oct 25, 2008 11:43 AM |
| ASUS Launches Four New Full HD LCD Monitors | malware | News | 17 | Oct 21, 2008 04:40 AM |
| ASUS Launches World's Exclusive Onboard Dual HD3850 GPU Graphics Card | malware | News | 24 | Apr 5, 2008 05:01 AM |
| ASUS CT-479 Adapter | Urlyin | Reviews | 8 | Dec 4, 2005 04:41 PM |
| Cebit 2005 - Day 2 | W1zzard | Reviews | 0 | Mar 15, 2005 07:35 PM |