Crunchers Helping Crunchers

[Velvet Wafer]

In regard of bogmalis honor in this forum and his kind nature: YES. i dont believe he wont send the parts not^^

but you maybe see me again... there is still a unused 3.4ghz x2 to use!! i dont want to ask again now, but that will be the next iam asking for... am2 board

[Chicken Patty]

Originally Posted by Velvet Wafer

In regard of bogmalis honor in this forum and his kind nature: YES. i dont believe he wont send the parts not^^

but you maybe see me again... there is still a unused 3.4ghz x2 to use!! i dont want to ask again now, but that will be the next iam asking for... am2 board

awesome, i'll get you off for now, when you want to be put back up, let me know

[Paulieg]

Originally Posted by Velvet Wafer

In regard of bogmalis honor in this forum and his kind nature: YES. i dont believe he wont send the parts not^^

but you maybe see me again... there is still a unused 3.4ghz x2 to use!! i dont want to ask again now, but that will be the next iam asking for... am2 board

I try to offer stuff up when I can. However, I don't hold a candle to Bogmali. He has even bailed me out a time or two. By the way, anyone need a 2GB set of DDR2? I've got a 2GB set of Ballistix dying to be used in a cruncher. Just pay the shipping and they are yours.

Also, I'd like to thank CP for creating and managing this thread. I think this will take the place of my "Pay it forward" thread, which is good since I don't have the time to maintain the thread.

[Chicken Patty]

Originally Posted by Paulieg

I try to offer stuff up when I can. However, I don't hold a candle to Bogmali. He has even bailed me out a time or two. By the way, antone need a 2GB set of DDR2? I've got a 2GB set of Ballistix dying to be used in a cruncher.

Also, I'd like to thank CP for creating and managing this thread. I think this will take the place of my "Pay it forward" thread, which is good since I don't have the time to maintain the thread.

no problem Paul, glad this is helping buddy

[Velvet Wafer]

Originally Posted by Paulieg

I try to offer stuff up when I can. However, I don't hold a candle to Bogmali. He has even bailed me out a time or two. By the way, anyone need a 2GB set of DDR2? I've got a 2GB set of Ballistix dying to be used in a cruncher. Just pay the shipping and they are yours.

Also, I'd like to thank CP for creating and managing this thread. I think this will take the place of my "Pay it forward" thread, which is good since I don't have the time to maintain the thread.

if you add them to the shipping from bogmali, i promise to buy an am3 board next month !
(a ud4p), so i can pair them with my old proc and my actual board, or as long as there are parts missing (only a few, not expensive,board has igp) with 2 other ballsitix i own, in the 939 board i get... is that a deal? ;-)

you all are damn friendly, but paulieg made me weak with saying they die for a life in a cruncher if things work out well (christmas), the x2 the will get replaced with a nice,cheap regor, or even x3, if the prices drop

anyways, a hell of a bunch of freaked out idealists, and friendly crunching athlets!
thanks for every bit of help ive got!

[bogmali]

Hey Paul, circle back to what Velvet what was saying about the radiator coming from you (was there a res in there as well?), I offered to fork out a rad so the one you are sending to him you'll be sending to me instead to save shipping costs. PM me if you have questions bro.

Asrock X58 eh, is it the same one I have?

[Paulieg]

Originally Posted by bogmali

Hey Paul, circle back to what Velvet what was saying about the radiator coming from you (was there a res in there as well?), I offered to fork out a rad so the one you are sending to him you'll be sending to me instead to save shipping costs. PM me if you have questions bro.

Asrock X58 eh, is it the same one I have?

Hey Bog, send me your address, and I'll get the rad to you. No res is coming. I'm actually in need of one myself. So, if anyone has an extra res, particularly a Swifty Micro res, send it my way!!

I think it's the same board, the Supercomputer. Couldn't resist. It was $100 off open box at newegg. I was going to try the Extreme, but it sold out too quick.

[p_o_s_pc]

Originally Posted by Chicken Patty

POS is that ok? I don't think mine are any longer, but I'll check when I get home.

doesn't matter 18inch would be just fine even. Don't need nothing long since its a open rig.


BTW i should have another X2 running in about a week.(depends on what the GF wants to do this week/weekend)

[Chicken Patty]

Originally Posted by p_o_s_pc

doesn't matter 18inch would be just fine even. Don't need nothing long since its a open rig.


BTW i should have another X2 running in about a week.(depends on what the GF wants to do this week/weekend)

@ twilyth

you going to send him the IDE cable. or me? your choice since you offered first. Let me know buddy

Originally Posted by Chicken Patty

@ twilyth

you going to send him the IDE cable. or me? your choice since you offered first. Let me know buddy

I'll do it, but he has to get back to me with an addy. I didn't hear anything so I figured he was set.

Where's that cattle prod damn it!

(kidding)

[Chicken Patty]

Originally Posted by twilyth

I'll do it, but he has to get back to me with an addy. I didn't hear anything so I figured he was set.

Where's that cattle prod damn it!

(kidding)

Ok, thanks bro. Let me know if anything, i'll send one his way.

[bogmali]

Originally Posted by Paulieg

I think it's the same board, the Supercomputer. Couldn't resist. It was $100 off open box at newegg. I was going to try the Extreme, but it sold out too quick.

I had to double-check and confirmed that mine is the extreme version

PMing you my address now

Originally Posted by Chicken Patty

Ok, thanks bro. Let me know if anything, i'll send one his way.

Done and done.

Will go out tomorrow.

[p_o_s_pc]

Originally Posted by twilyth

Done and done.

Will go out tomorrow.

Thank you all i need now is a Socket A mobo(that i have lined up just waiting to see how the money flow goes) a PSU that is reliable and can power a Socket A AXP@2.3ghz possibly a HDD(anysize that will fit a stripped down windows XP and WCG)

BTW Some fans of ANYSIZE could also be helpful that just came to mind.

[Velvet Wafer]

Originally Posted by p_o_s_pc

Thank you all i need now is a Socket A mobo(that i have lined up just waiting to see how the money flow goes) a PSU that is reliable and can power a Socket A AXP@2.3ghz possibly a HDD(anysize that will fit a stripped down windows XP and WCG)

BTW Some fans of ANYSIZE could also be helpful that just came to mind.

fuck. now i know what i forgot

lol, i bet the fans will cost me as much als the whole shipping

[JrRacinFan]

What proc for that sA rig man?

[p_o_s_pc]

Originally Posted by JrRacinFan

What proc for that sA rig man?

its the AXP 3000+ Barton I still want to get it crunching

[JrRacinFan]

Yup, noi boards from me for it. Sorry.

[Velvet Wafer]

i heard stanhemi, the poor one fights with an aquarium pump... is there no cruncher out there with a spare pump???

his crunching farm lost 2/4 major crunching rigs.
help him get at least to his quad back.working without a quad is inhuman

thanks guys!

[p_o_s_pc]

Originally Posted by JrRacinFan

Yup, noi boards from me for it. Sorry.

no problem I have one lined up already from "theonedub" just have to send him money for it.

@CP can you add me to the list of stuff needed please
Socket A mobo that supports Barton
PSU 200w or higher
HDD IDE or sata

[Chicken Patty]

Originally Posted by p_o_s_pc

no problem I have one lined up already from "theonedub" just have to send him money for it.

@CP can you add me to the list of stuff needed please
Socket A mobo that supports Barton
PSU 200w or higher
HDD IDE or sata

got you up there, you've shown some good dedication to crunching lately so don't let me down

[Paulieg]

Originally Posted by bogmali

I had to double-check and confirmed that mine is the extreme version

PMing you my address now

Yeah. the Extreme is a cut down version of the Supercomputer, and a heck of a lot cheaper. They sold out while I was mowing the lawn Sunday. It's all good though. I got a good deal, if the open box is a good one, and it nudged me to finally buy an SSD.

[p_o_s_pc]

Originally Posted by Chicken Patty

got you up there, you've shown some good dedication to crunching lately so don't let me down

thanks bro i won't let you down i just bought another board and CPU for crunching

[Velvet Wafer]

the urge to buy new hardware gets bigger everyday... i feel like im capable of doing something very pleasing soon

[theonedub]

Originally Posted by p_o_s_pc

no problem I have one lined up already from "theonedub" just have to send him money for it.

@CP can you add me to the list of stuff needed please
Socket A mobo that supports Barton
PSU 200w or higher
HDD IDE or sata

I've got an OE PSU (Bestec ~250w), that powered my E2200 comp and the Sempron 3000+ just sitting here. They should still work too. Maybe I will see if it will fit in a different box and just add a bunch of foam peanuts and bubble wrap

It might actually work! Although I am a little hesitant because the PSU might damage the MB in shipping... Let me know if you are interested and I will figure it out.