TPU's WCG/BOINC Team - Page 154

Chicken Patty · Oct 6, 2009, 11:45 PM

Quote:

Originally Posted by Velvet Wafer

what voltages and clocks do you ran the dominators?

strange cp... you installed the new forceware maybe?

naw, i've installed new ones afterwards, but the problem was having from before as well.

Velvet Wafer · Oct 6, 2009, 11:56 PM

if its not the psu... its the cooling or the board

Chicken Patty · Oct 7, 2009, 12:01 AM

Quote:

Originally Posted by Velvet Wafer

what voltages and clocks do you ran the dominators?

strange cp... you installed the new forceware maybe?

Quote:

Originally Posted by Velvet Wafer

if its not the psu... its the cooling or the board

naw, its outside a case. Cooling is not an issue. PSU is the only thing I can think off. But the voltages are almost identical, why won't it happen now?

Mindweaver · Oct 7, 2009, 01:06 AM

Quote:

Originally Posted by Chicken Patty

single 12v. PCP&C 860W

Cool that's a good ps and single is always better.

Quote:

Originally Posted by Velvet Wafer

what voltages and clocks do you ran the dominators?

strange cp... you installed the new forceware maybe?

2.10v.. This set you have to set the voltage to get the 1066MHz or it will default to 1.8v 800MHz.

Mindweaver · Oct 7, 2009, 01:13 AM

Chicken are you using any kind of line cleaner?.. like a UPS? Do you have a lot of brown outs? If you're not feeding your psu solid maybe? Just a thought.

Chicken Patty · Oct 7, 2009, 01:20 AM

Quote:

Originally Posted by Mindweaver

Chicken are you using any kind of line cleaner?.. like a UPS? Do you have a lot of brown outs? If you're not feeding your psu solid maybe? Just a thought.

naw, just straight into the socket.

Unless I am drawing too much power maybe? I have 3 rigs in my room, but if the power grid was to be crapping or something then wouldn't all the rigs do the same. I switched cables to use the one that came with the PSU, maybe this cable is bad???

Mindweaver · Oct 7, 2009, 01:47 AM

You can always test the cable bro.. but I've got 15 year old cables that still work.. hehehe Most of the time its just the ground pin braking off.. Not really the cable failing.. Here if you don't have one of these http://www.newegg.com/Product/Produc...82E16899887004 ... Pick one up or a multi meter.

Chicken Patty · Oct 7, 2009, 04:54 AM

I think I got it figured out, I think.

I removed the waterloop getting ready to start checking stuff out again. I removed it from the mobo tray, it was not in the case though, I was just using the mobo tray as the mobos resting place. I put my qx cruncher in the TT case now

. So the tech station where the qx used to sit, is now home for the i7. its on stock cooler but i loaded my 4.3 Ghz settings and without load I just let it run furmark, and it ran for about five minutes perfectly fine. I am at defaults now and crunching

It could have only either been grounding to the tray, or the block grounding, what do you guys think?

HammerON · Oct 7, 2009, 09:30 AM

Just ordered another i7 920 and am looking for the rest of the parts necessary to complete the build. I just can't stand to see CP getting that pie!!!

[Ion] · Oct 7, 2009, 11:54 AM

Sweet, should be another 30K PPD overclocked

Chicken Patty · Oct 7, 2009, 12:13 PM

good job hammer

Fitseries3 · Oct 7, 2009, 02:35 PM

seems we have less than 50% of the team crunching.

i've been watching this for about 2 weeks now.

any ideas on how to get this up a bit?

how can we nicely get some of our idle members going again?

dark2099 · Oct 7, 2009, 08:32 PM

To the members who have stopped crunching, please rejoin us in our crunching efforts, we dearly miss you. I understand that crunching can be a big power draw amongst other things, and given today's economy still not being as strong as it has been, this can be a tall order. But we are not asking for 24/7 commitment like all of us do, only that you do as best you can. Thank you to those who already are contributing, we look forward to regaining the support of any members who wish to contribute again, and we will always welcome new members with great pleasure.

dark2099

Fitseries3 · Oct 7, 2009, 08:37 PM

i wanna turn that 40% into at least 60%

if you view my stats you can see im going once again.

http://stats.free-dc.org/stats.php?p...cg&name=565031

Chicken Patty · Oct 7, 2009, 09:57 PM

holy shit, fit
going once again, AWESOME

I got 3 rigs going 14 threads total.

i7 920 (8 threads)
QX9650 (4 threads)
E7200 (2 threads)

E7200 was down all night and day. had some network issues, but is back up just now

p_o_s_pc · Oct 7, 2009, 10:09 PM

i only have threads 9 ATM
4200(2 threads)
5kBE(2threads)
P4 Ht(2threads)
P4(1 thread)
AXP(1thread)
celly D(1thread)

can't wait to get the quad and to get the other phenom crunching again then i will have 15 threads

Chicken Patty · Oct 7, 2009, 10:17 PM

Quote:

Originally Posted by p_o_s_pc

i only have threads 9 ATM
4200(2 threads)
5kBE(2threads)
P4 Ht(2threads)
P4(1 thread)
AXP(1thread)
celly D(1thread)

can't wait to get the quad and to get the other phenom crunching again then i will have 15 threads

at that point your output should be very similar to mines, give or take.

That'll be awesome.

p_o_s_pc · Oct 7, 2009, 10:28 PM

Quote:

Originally Posted by Chicken Patty

at that point your output should be very similar to mines, give or take.

That'll be awesome.

i hope so but i think yours maybe alittle higher still because the CPUs you have crunching are more powerful. But if i get a board for the other dual(after i get the quad) then i will have 17 threads then i think we will be neck and neck

Paulieg · Oct 7, 2009, 11:54 PM

Damn it! Ewiz took forever to get my i7 860 shipped out, and now the UPS tracking has just shown "billing information received" for 2 days. It's probably going to be another 3-5 business days before I get the chip, and my points are suffering!!

Quote:

Originally Posted by Fitseries3

i wanna turn that 40% into at least 60%

if you view my stats you can see im going once again.

http://stats.free-dc.org/stats.php?p...cg&name=565031

Good to see you back fits!

[Ion] · Oct 7, 2009, 11:54 PM

10 threads here
Q9400 (4 threads)
E6550 (2 threads)
3 P4s and P4 Celerons (3 threads)
Pentium M (1 thread)
But I'm still getting thrashed by POS

Chicken Patty · Oct 8, 2009, 12:40 AM

Quote:

Originally Posted by p_o_s_pc

i hope so but i think yours maybe alittle higher still because the CPUs you have crunching are more powerful. But if i get a board for the other dual(after i get the quad) then i will have 17 threads then i think we will be neck and neck

yeah true, but that's why I said give or take, but shouldn't be too far off.

Quote:

Originally Posted by Paulieg

Damn it! Ewiz took forever to get my i7 860 shipped out, and now the UPS tracking has just shown "billing information received" for 2 days. It's probably going to be another 3-5 business days before I get the chip, and my points are suffering!!

Good to see you back fits!

Don't worry dude, as you can tell we got your back

Fitseries3 · Oct 8, 2009, 01:12 AM

seems we are doing a tad better than earlier...

p_o_s_pc · Oct 8, 2009, 01:28 AM

is Zipzoomfly a good place to buy parts from? If so i found Ph II X4 805 there for $109.99($10 more then Athlon II 620)

Paulieg · Oct 8, 2009, 01:36 AM

Quote:

Originally Posted by p_o_s_pc

is Zipzoomfly a good place to buy parts from? If so i found Ph II X4 805 there for $109.99($10 more then Athlon II 620)

People have mixed experiences with ZZF. I've never had a problem though. They are just not quite as fast as the egg.

[Ion] · Oct 8, 2009, 01:45 AM

ZipZoomFly is a perfectly fine place to buy parts, I bought 2 PNY 9600GSOs from them for $40 each back in June, cards arrived 3 days after order was placed

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Oct 6, 2009, 11:56 PM	#3827
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,847 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	if its not the psu... its the cooling or the board __________________ CPU-Z validation sig pics temporarily blocked

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

System Name:	Sechs / EyeSeven
Processor:	I7 970 @ 4.0ghz / I7 2600k @ 4.5Ghz
Motherboard:	P6X58D-E / ASRock Z68 Extreme3 Gen3
Cooling:	CM Hyper 212 Plus push-pull / Corsair H50
Memory:	Corsair 30GB DDR3 1600 / G.Skill DDR3 1600 8gb 2x4GB
Video Card:	EVGA 480 / MSI GTX 680 PE 2Gb
Hard Disk:	GSkill 120GB SSD & OCZ RevoDrive 3 X2 240GB / Corsair 60gb SSD, 3x250 WD RAID0 avg 170mb\sec
Optical Drive:	Asus 24x / Ext. Samsung Writemaster 22x
CRT/LCD Model:	2x Samsung SyncMaster 2243 22" / 3x Acer 22" Nvidia surround
Case:	COOLER MASTER HAF 912 / Cooler Master Storm Scout
Sound Card:	On board / SB X-Fi Gamer
PSU:	Corsair tx650w / Corsair tx750w
Software:	Windows 7 Pro x64 / Windows 7 ultimate x64

Oct 7, 2009, 01:13 AM	#3830
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,660 (2.44/day) Thanks: 4,326 Thanked 2,319 Times in 1,150 Posts System Specs	Chicken are you using any kind of line cleaner?.. like a UPS? Do you have a lot of brown outs? If you're not feeding your psu solid maybe? Just a thought. __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

Oct 7, 2009, 01:47 AM	#3832
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,660 (2.44/day) Thanks: 4,326 Thanked 2,319 Times in 1,150 Posts System Specs	You can always test the cable bro.. but I've got 15 year old cables that still work.. hehehe Most of the time its just the ground pin braking off.. Not really the cable failing.. Here if you don't have one of these http://www.newegg.com/Product/Produc...82E16899887004 ... Pick one up or a multi meter. __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

Oct 7, 2009, 04:54 AM	#3833
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,891 (11.92/day) Thanks: 15,152 Thanked 12,313 Times in 7,777 Posts System Specs	I think I got it figured out, I think. I removed the waterloop getting ready to start checking stuff out again. I removed it from the mobo tray, it was not in the case though, I was just using the mobo tray as the mobos resting place. I put my qx cruncher in the TT case now . So the tech station where the qx used to sit, is now home for the i7. its on stock cooler but i loaded my 4.3 Ghz settings and without load I just let it run furmark, and it ran for about five minutes perfectly fine. I am at defaults now and crunching It could have only either been grounding to the tray, or the block grounding, what do you guys think? __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Oct 7, 2009, 09:30 AM	#3834
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,352 (2.82/day) Thanks: 3,982 Thanked 2,878 Times in 1,542 Posts System Specs	Just ordered another i7 920 and am looking for the rest of the parts necessary to complete the build. I just can't stand to see CP getting that pie!!!

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Oct 7, 2009, 11:54 AM	#3835
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,666 (7.92/day) Thanks: 8,249 Thanked 9,328 Times in 4,261 Posts System Specs	Sweet, should be another 30K PPD overclocked __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Oct 7, 2009, 12:13 PM	#3836
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,891 (11.92/day) Thanks: 15,152 Thanked 12,313 Times in 7,777 Posts System Specs	good job hammer __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Oct 7, 2009, 02:35 PM	#3837
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.29/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	seems we have less than 50% of the team crunching. i've been watching this for about 2 weeks now. any ideas on how to get this up a bit? how can we nicely get some of our idle members going again?

System Name:	Craigslist-nickle-and-dime
Processor:	i5 655k
Motherboard:	Gigabyte H55M-UD2H
Cooling:	poop
Memory:	3x2gb OCZ Platinum 1600mhz
Video Card:	Asus 6950 2gb DCII
Hard Disk:	WD 640GB,1TB Black
Optical Drive:	Samsung 22x DL DVD-RW
CRT/LCD Model:	Sammy 55in LED TV
Software:	WIN 7 x64

Oct 7, 2009, 08:32 PM	#3838
dark2099 Join Date: Feb 2008 Location: where everyone wants to be Posts: 4,152 (2.16/day) Thanks: 472 Thanked 751 Times in 624 Posts System Specs	To the members who have stopped crunching, please rejoin us in our crunching efforts, we dearly miss you. I understand that crunching can be a big power draw amongst other things, and given today's economy still not being as strong as it has been, this can be a tall order. But we are not asking for 24/7 commitment like all of us do, only that you do as best you can. Thank you to those who already are contributing, we look forward to regaining the support of any members who wish to contribute again, and we will always welcome new members with great pleasure. dark2099 __________________ Heatware Check out Gomez Peer on how to make your PC work for you. Referred by dark2099 please! Mini Rig: Biostar TP67XE / i5 2500k / Corsair H55 / 2x4GB PNY / XFX 7770 / Corsair CX500M / Win 8 64 bit / Thermaltake V9 Blackwidow

System Name:	Everchanging
Processor:	Core i7 3770k
Motherboard:	ASUS Sabertooth z77
Cooling:	Corsair H100 with 2x Corsair SP120 High Pressure
Memory:	2x4GB G.Skill Trident X 2400MHz 9-11-11-31
Video Card:	HIS IceQ Turbo 7950
Hard Disk:	Lots
Optical Drive:	LG BluRay Burner
CRT/LCD Model:	Samsung T260HD + Acer H233H
Case:	Corsair 800D
Sound Card:	Creative Sound Blaster Z
PSU:	Enermax Revolution 85+ 1050w
Software:	Windows 8 x64

Oct 7, 2009, 08:37 PM	#3839
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.29/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	i wanna turn that 40% into at least 60% if you view my stats you can see im going once again. http://stats.free-dc.org/stats.php?p...cg&name=565031

Oct 7, 2009, 09:57 PM	#3840
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,891 (11.92/day) Thanks: 15,152 Thanked 12,313 Times in 7,777 Posts System Specs	holy shit, fit going once again, AWESOME I got 3 rigs going 14 threads total. i7 920 (8 threads) QX9650 (4 threads) E7200 (2 threads) E7200 was down all night and day. had some network issues, but is back up just now __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Oct 7, 2009, 10:09 PM	#3841
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	i only have threads 9 ATM 4200(2 threads) 5kBE(2threads) P4 Ht(2threads) P4(1 thread) AXP(1thread) celly D(1thread) can't wait to get the quad and to get the other phenom crunching again then i will have 15 threads __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Oct 7, 2009, 11:54 PM	#3845
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,666 (7.92/day) Thanks: 8,249 Thanked 9,328 Times in 4,261 Posts System Specs	10 threads here Q9400 (4 threads) E6550 (2 threads) 3 P4s and P4 Celerons (3 threads) Pentium M (1 thread) But I'm still getting thrashed by POS __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

Oct 8, 2009, 01:12 AM	#3847
Fitseries3 Eleet Hardware Junkie Join Date: Oct 2007 Location: Republic of Texas Posts: 14,993 (7.29/day) Thanks: 4,318 Thanked 3,285 Times in 2,186 Posts System Specs	seems we are doing a tad better than earlier...

Oct 8, 2009, 01:28 AM	#3848
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	is Zipzoomfly a good place to buy parts from? If so i found Ph II X4 805 there for $109.99($10 more then Athlon II 620) __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

Oct 8, 2009, 01:45 AM	#3850
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,666 (7.92/day) Thanks: 8,249 Thanked 9,328 Times in 4,261 Posts System Specs	ZipZoomFly is a perfectly fine place to buy parts, I bought 2 PNY 9600GSOs from them for $40 each back in June, cards arrived 3 days after order was placed __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16542	May 22, 2013 02:25 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM