TPU's WCG/BOINC Team - Page 173

p_o_s_pc · Oct 25, 2009, 04:36 PM

@velevet edit your post please no talk of illegal software

Mindweaver · Oct 25, 2009, 04:37 PM

Quote:

Originally Posted by Velvet Wafer

fuck^^ i need some 64 bit windows too

i only have professional 32 bit

man, why is windows 7 so expensive

even an xp64 isnt affordable...

I just checked Pricewatch.com and found this http://www.9software.com/Microsoft_W...htm&Click=5673 It's got free shipping!

Velvet Wafer · Oct 25, 2009, 04:37 PM

Quote:

Originally Posted by p_o_s_pc

@velevet edit your post please no talk of illegal software

very sad that such talk is forbidden here

Herr Mindweaver, haben sie auch etwas auf Deutsch?^^

Mindweaver · Oct 25, 2009, 04:43 PM

Lange Nacht des Trinkens! Traurig kein mein Freund!

Velvet Wafer · Oct 25, 2009, 04:46 PM

Schon wieder? Haben sie zu sehr dem Schnaps zugesprochen?

Mindweaver · Oct 25, 2009, 04:48 PM

Nein UPS Wasser! hehehe

p_o_s_pc · Oct 25, 2009, 04:50 PM

how long of linpack should i run before i consider it stable and start crunching again?

btw cheap TIM is better then no TIM. Before load was 64c without any with it 57c max on linpack

[Ion] · Oct 25, 2009, 04:52 PM

Quote:

Originally Posted by p_o_s_pc

how long of linpack should i run before i consider it stable and start crunching again?

I would say 2 hours, but less would probably be fine (maybe an hour). LinPack is far more stressful than P95, which I usually let run for 8-12 hours

Mindweaver · Oct 25, 2009, 04:54 PM

Ja.. Menge harten Alkohols... hehehe

p_o_s_pc · Oct 25, 2009, 04:54 PM

Quote:

Originally Posted by [Ion]

I would say 2 hours, but less would probably be fine (maybe an hour). LinPack is far more stressful than P95, which I usually let run for 8-12 hours

most of the time i let it go for about ~1hr sometimes more then run wprime super PI 3dmark furmark. (i know some of them stress Gpu more then CPU) just to make sure everything is stable. I think i will let it run 1hr then run orthos for 30mins just so it gets tested under different stress levels

Velvet Wafer · Oct 25, 2009, 04:58 PM

Quote:

Originally Posted by p_o_s_pc

how long of linpack should i run before i consider it stable and start crunching again?

btw cheap TIM is better then no TIM. Before load was 64c without any with it 57c max on linpack

you could have used motor oil

run it 1-2 hours with 1-2 memtests, allocate the most memory to the memtests,they find memory errors far better than linpak,so its more useful when stressing the gpu (low amount of memory)

was für welchen denn Herr Mindweaver?^^

p_o_s_pc · Oct 25, 2009, 05:01 PM

Quote:

Originally Posted by Velvet Wafer

you could have used motor oil

run it 1-2 hours with 1-2 memtests, allocate the most memory to the memtests,they find memory errors far better than linpak,so its more useful when stressing the gpu (low amount of memory)

was für welchen denn Herr Mindweaver?^^

not overclocking the ram at all its underclocked so that won't be a problem area

Mindweaver · Oct 25, 2009, 05:02 PM

Crown Royal.. hehehe

Velvet Wafer · Oct 25, 2009, 05:03 PM

Quote:

Originally Posted by p_o_s_pc

not overclocking the ram at all its underclocked so that won't be a problem area

so run it with low memory either ;-) stresses cpu more

EDIT:

i love whiskey too^^

my test just completed,have a look ;-)

p_o_s_pc · Oct 25, 2009, 06:18 PM

here is my final overclock.I think i could do better but i stop at 3ghz on these chips

Velvet Wafer · Oct 25, 2009, 06:21 PM

naw come on!^^ give him one more, i hate uncomplete clocks

where did your patriots went? :-)

p_o_s_pc · Oct 25, 2009, 06:23 PM

Quote:

Originally Posted by Velvet Wafer

naw come on!^^ give him one more, i hate uncomplete clocks

where did your patriots went? :-)

main rig

i can only go up 2mhz at a time with the gigabyte

btw here is main rig http://valid.canardpc.com/show_oc.php?id=789591

Velvet Wafer · Oct 25, 2009, 06:24 PM

seems that yout specs are a little outdated,eh?

ah, i know that from the gigabyte of a friend!
fucking nvidia chipsets

!

EDIT: have you tried to achieve 300+ htt with this board and this proc? i could! ;-) 380-390 i maxed out

p_o_s_pc · Oct 25, 2009, 06:31 PM

Quote:

Originally Posted by Velvet Wafer

seems that yout specs are a little outdated,eh?

ah, i know that from the gigabyte of a friend!
fucking nvidia chipsets

!

updated specs

what board and what cpu?

Velvet Wafer · Oct 25, 2009, 06:32 PM

Quote:

Originally Posted by p_o_s_pc

updated specs

what board and what cpu?

http://www.gigabyte.de/Support/Mothe...4371#anchor_os

a 5000+ NON Black Edition

p_o_s_pc · Oct 25, 2009, 06:41 PM

Quote:

Originally Posted by Velvet Wafer

http://www.gigabyte.de/Support/Mothe...4371#anchor_os

a 5000+ NON Black Edition

i will try with my gigabyte and 4200+

ram maybe limiting factor

p_o_s_pc · Oct 25, 2009, 06:51 PM

Quote:

Originally Posted by Velvet Wafer

http://www.gigabyte.de/Support/Mothe...4371#anchor_os

a 5000+ NON Black Edition

this is for you
http://valid.canardpc.com/show_oc.php?id=789615

Velvet Wafer · Oct 25, 2009, 06:53 PM

ah sry i got you wrong.^^
i made the high htt with the biostar, my apologies

the gigabyte crapped out at 290

so far things look good. push it a little more

p_o_s_pc · Oct 25, 2009, 06:56 PM

Quote:

Originally Posted by Velvet Wafer

ah sry i got you wrong.^^
i made the high htt with the biostar, my apologies

the gigabyte crapped out at 290

so far things look good. push it a little more

don't want to push any higher I just want to let it crunch. I have maxed out the gigabyte board before if you would like i will dig up the screen shots

the gigabyte board is a hell of a clocker can get higher HT speeds then the biostar can but not by vary much.Still impressive for a 3 year old ~$70 board

Velvet Wafer · Oct 25, 2009, 07:05 PM

Quote:

Originally Posted by p_o_s_pc

don't want to push any higher I just want to let it crunch. I have maxed out the gigabyte board before if you would like i will dig up the screen shots

the gigabyte board is a hell of a clocker can get higher HT speeds then the biostar can but not by vary much.Still impressive for a 3 year old ~$70 board

your proc is probably as old,if not older.

so it fits.

i just looked,
my 939 cruncher does from 800 up to 1100ppd, awesome!

it just has 2.9ghz, but its L2 caches are like 30% faster than that of a g2. i have proof

Oct 25, 2009, 04:36 PM	#4301
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	@velevet edit your post please no talk of illegal software __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

System Name:	Sechs / EyeSeven
Processor:	I7 970 @ 4.0ghz / I7 2600k @ 4.5Ghz
Motherboard:	P6X58D-E / ASRock Z68 Extreme3 Gen3
Cooling:	CM Hyper 212 Plus push-pull / Corsair H50
Memory:	Corsair 30GB DDR3 1600 / G.Skill DDR3 1600 8gb 2x4GB
Video Card:	EVGA 480 / MSI GTX 680 PE 2Gb
Hard Disk:	GSkill 120GB SSD & OCZ RevoDrive 3 X2 240GB / Corsair 60gb SSD, 3x250 WD RAID0 avg 170mb\sec
Optical Drive:	Asus 24x / Ext. Samsung Writemaster 22x
CRT/LCD Model:	2x Samsung SyncMaster 2243 22" / 3x Acer 22" Nvidia surround
Case:	COOLER MASTER HAF 912 / Cooler Master Storm Scout
Sound Card:	On board / SB X-Fi Gamer
PSU:	Corsair tx650w / Corsair tx750w
Software:	Windows 7 Pro x64 / Windows 7 ultimate x64

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

Oct 25, 2009, 04:43 PM	#4304
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,319 Times in 1,150 Posts System Specs	Lange Nacht des Trinkens! Traurig kein mein Freund! __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

Oct 25, 2009, 04:46 PM	#4305
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,846 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	Schon wieder? Haben sie zu sehr dem Schnaps zugesprochen? __________________ CPU-Z validation sig pics temporarily blocked

Oct 25, 2009, 04:48 PM	#4306
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,319 Times in 1,150 Posts System Specs	Nein UPS Wasser! hehehe __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

Oct 25, 2009, 04:50 PM	#4307
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	how long of linpack should i run before i consider it stable and start crunching again? btw cheap TIM is better then no TIM. Before load was 64c without any with it 57c max on linpack __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Oct 25, 2009, 04:54 PM	#4309
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,319 Times in 1,150 Posts System Specs	Ja.. Menge harten Alkohols... hehehe __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

Oct 25, 2009, 05:02 PM	#4313
Mindweaver Moderato®™ Join Date: Apr 2009 Location: Statesville, NC Posts: 3,651 (2.44/day) Thanks: 4,320 Thanked 2,319 Times in 1,150 Posts System Specs	Crown Royal.. hehehe __________________ “As long as I feel the warmth from the sun and breathe precious air…. I must ask questions to feed the Mind!” Battletag: Mindweaver#1523

Oct 25, 2009, 06:18 PM	#4315
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	here is my final overclock.I think i could do better but i stop at 3ghz on these chips __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

Oct 25, 2009, 06:21 PM	#4316
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,846 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	naw come on!^^ give him one more, i hate uncomplete clocks where did your patriots went? :-) __________________ CPU-Z validation sig pics temporarily blocked

Oct 25, 2009, 06:24 PM	#4318
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,846 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	seems that yout specs are a little outdated,eh? ah, i know that from the gigabyte of a friend! fucking nvidia chipsets ! EDIT: have you tried to achieve 300+ htt with this board and this proc? i could! ;-) 380-390 i maxed out __________________ CPU-Z validation sig pics temporarily blocked Last edited by Velvet Wafer; Oct 25, 2009 at 06:31 PM.

Oct 25, 2009, 06:53 PM	#4323
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,846 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	ah sry i got you wrong.^^ i made the high htt with the biostar, my apologies the gigabyte crapped out at 290 so far things look good. push it a little more __________________ CPU-Z validation sig pics temporarily blocked

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16541	May 22, 2013 02:57 AM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM