TPU's WCG/BOINC Team - Page 174

p_o_s_pc · Oct 25, 2009, 07:13 PM

Quote:

Originally Posted by Velvet Wafer

your proc is probably as old,if not older.

so it fits.

i just looked,
my 939 cruncher does from 800 up to 1100ppd, awesome!

it just has 2.9ghz, but its L2 caches are like 30% faster than that of a g2. i have proof

dully max bus speed

loony sempy

Velvet Wafer · Oct 25, 2009, 07:29 PM

not bad,especially like the ht^^
you ever encountered big problems with it?
in my whole time of overclocking, the ht treated me best

p_o_s_pc · Oct 25, 2009, 07:53 PM

Quote:

Originally Posted by Velvet Wafer

not bad,especially like the ht^^
you ever encountered big problems with it?
in my whole time of overclocking, the ht treated me best

never had a problem folded at that speed passed 8hrs of otrhos at that speed. I didn't save any SS's of it on photobucket so i don't have them anymore

btw running the x2 4200+@3ghz(10x300) right now so far rock solid

Velvet Wafer · Oct 25, 2009, 09:34 PM

shouldnt bring you problems

p_o_s_pc · Oct 25, 2009, 09:45 PM

Quote:

Originally Posted by Velvet Wafer

shouldnt bring you problems

my biostar randomly BSOD when running the same settings(but ram was running faster)

I think i didn't get the best board. Seems everyone is getting so much higher then me. I know its not the chip as i have used a 4850e,5000BE,4200,9100e.the 4850e ran 290x10.5 stable(ran 340x10 suicide run on gigabyte 320x10 stable)
5kBE 290x10 stable(runs 320x10 on gigabyte)
4200 known to be stable at 300x10 run 276x10 on biostar
9100e 274 stable 275 BSOD then hard crash

Velvet Wafer · Oct 25, 2009, 09:58 PM

my biostar was fine for am2 procs.
to not say:
overpowered ;-)
which revision do you own?

p_o_s_pc · Oct 25, 2009, 10:00 PM

Quote:

Originally Posted by Velvet Wafer

my biostar was fine for am2 procs.
to not say:
overpowered ;-)
which revision do you own?

does this tell you

Chicken Patty · Oct 25, 2009, 10:53 PM

guys, i7 has not crunched all day. Currently running some HDD tests and stuf to determine if its the HDD giving me the issues that I have. So far it has found some errors. I'll keep you'll posted.

Velvet Wafer · Oct 26, 2009, 12:02 AM

Quote:

Originally Posted by p_o_s_pc

does this tell you

the revision number is printed directly on the board, under the a2+ of the name, between the first pcie slot and the nb

p_o_s_pc · Oct 26, 2009, 12:31 AM

Quote:

Originally Posted by Velvet Wafer

the revision number is printed directly on the board, under the a2+ of the name, between the first pcie slot and the nb

i can't tell you then bro as that area is blocked by the CPU cooler and video card.(CPU cooler almost touches back of card) i will look after i am done eating but i won't takeout a card

EDIT: v5.1

Velvet Wafer · Oct 26, 2009, 12:40 AM

Quote:

Originally Posted by p_o_s_pc

i can't tell you then bro as that area is blocked by the CPU cooler and video card.(CPU cooler almost touches back of card) i will look after i am done eating but i won't takeout a card

EDIT: v5.1

you got a new revision, i had to destroy 2 boards to get that, so it should be alright and not prone to dying, like the first 2 revisions

p_o_s_pc · Oct 26, 2009, 12:42 AM

Quote:

Originally Posted by Velvet Wafer

you got a new revision, i had to destroy 2 boards to get that, so it should be alright and not prone to dying, like the first 2 revisions

does that mean i shouldn't worry about replacing it yet?

Velvet Wafer · Oct 26, 2009, 12:46 AM

Quote:

Originally Posted by p_o_s_pc

does that mean i shouldn't worry about replacing it yet?

not by death,not by an am2 proc. the other 2 boards made it 3-5 months each. i used this one for over a year now

you hate your clear cmos jumper, and your battery,right?^^ Rams are also damn near the cooler

p_o_s_pc · Oct 26, 2009, 12:51 AM

Quote:

Originally Posted by Velvet Wafer

not by death,not by an am2 proc. the other 2 boards made it 3-5 months each. i used this one for over a year now

you hate your clear cmos jumper, and your battery,right?^^ Rams are also damn near the cooler

i plan to drop a X2 240 in it soon and clock it up. Then around Xmas(if i have the $$$) get a good board and DDR3 then later pickup a quad

To get the the battery and cmos jumper i have to take out BOTH cards(both of them are using battle axe so they take up alot of space

Velvet Wafer · Oct 26, 2009, 12:53 AM

cool the vrms over 1.35, if everything fails, simply hack,drill and saw a non compatible cooler in form, thats what i will do tomorrow ;-) have cleaned the board a few min ago,and i am looking at it atm

PS.
you could use enzotech copper sinks, but these you would have to glue with arctic adhesive

one day, i will build something, that allows me to reset my bios on button press

p_o_s_pc · Oct 26, 2009, 01:53 AM

Quote:

Originally Posted by Velvet Wafer

cool the vrms over 1.35, if everything fails, simply hack,drill and saw a non compatible cooler in form, thats what i will do tomorrow ;-) have cleaned the board a few min ago,and i am looking at it atm

PS.
you could use enzotech copper sinks, but these you would have to glue with arctic adhesive

one day, i will build something, that allows me to reset my bios on button press

would any of these heatsinks work?

http://www.newegg.com/Product/Produc...83&name=Mosfet
what about this one
http://www.svc.com/hr-09u-2.html

Velvet Wafer · Oct 26, 2009, 02:14 AM

Quote:

Originally Posted by p_o_s_pc

would any of these heatsinks work?

http://www.newegg.com/Product/Produc...83&name=Mosfet
what about this one
http://www.svc.com/hr-09u-2.html

idk about the second one, but look:
http://www.newegg.com/Product/Produc...82E16835708014
these one should fit. very short, and the only one that got straight holes

otherwise, the small pins should be glueable

p_o_s_pc · Oct 26, 2009, 02:22 AM

Quote:

Originally Posted by Velvet Wafer

idk about the second one, but look:
http://www.newegg.com/Product/Produc...82E16835708014
these one should fit. very short, and the only one that got straight holes

otherwise, the small pins should be glueable

i have been looking at that one myself but i think its too short. Do you have your biostar out of a case? If so could you measure the distance between the holes

Velvet Wafer · Oct 26, 2009, 12:54 PM

Quote:

Originally Posted by p_o_s_pc

i have been looking at that one myself but i think its too short. Do you have your biostar out of a case? If so could you measure the distance between the holes

of course i have, seems to be exact 8 centimeter

http://www.newegg.com/Product/Produc...82E16835708017
these would fit lenghtwise.

theonedub · Oct 26, 2009, 06:21 PM

My Q9550 @ 3.4 put up a respectable 2800 Boinc yesterday

Im sure that includes some carry over, anxious to see what the new average for this rig is with its OC!

Laurijan · Oct 26, 2009, 06:22 PM

I have this in mind or to say it more accurate all over my mind:
http://forums.techpowerup.com/showth...75#post1609475

[Ion] · Oct 26, 2009, 06:30 PM

Quote:

Originally Posted by theonedub

My Q9550 @ 3.4 put up a respectable 2800 Boinc yesterday

Im sure that includes some carry over, anxious to see what the new average for this rig is with its OC!

Looks good, that's almost 2x what I get on my Q9400 most days (I usually get about 1.6K). I would guess your average would be about 2100 PPD (I have found that for Penryn CPUs, they get about 1.1 WCG credits per mhz per core. So you would get 11 * 3400 * 4 /7 (to get it into BOINC points), so 2137 PPD. Of course, some days will be higher/lower depending WUs carrying over or not). With Windows x64 (vs x86), increase my estimates by about 10%.

theonedub · Oct 26, 2009, 06:34 PM

Quote:

Originally Posted by [Ion]

Looks good, that's almost 2x what I get on my Q9400 most days (I usually get about 1.6K). I would guess your average would be about 2100 PPD (I have found that for Penryn CPUs, they get about 1.1 WCG credits per mhz per core. So you would get 11 * 3400 * 4 /7 (to get it into BOINC points), so 2137 PPD. Of course, some days will be higher/lower depending WUs carrying over or not). With Windows x64 (vs x86), increase my estimates by about 10%.

Excellent. Im running Win7 Pro X64 as well

I will keep an eye out on the averages and see how close you were

[Ion] · Oct 26, 2009, 06:35 PM

Quote:

Originally Posted by theonedub

My Q9550 @ 3.4 put up a respectable 2800 Boinc yesterday

Im sure that includes some carry over, anxious to see what the new average for this rig is with its OC!

Quote:

Originally Posted by theonedub

Excellent. Im running Win7 Pro X64 as well

I will keep an eye out on the averages and see how close you were

So far my points have actually gone down since switching to Win 7 Pro x64, presumably because the WUs are pending validation and I lost some in-progress WUs when I reinstalled.

Laurijan · Oct 26, 2009, 06:59 PM

How fast is crunching in Ubuntu?

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Oct 25, 2009, 07:29 PM	#4327
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,845 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	not bad,especially like the ht^^ you ever encountered big problems with it? in my whole time of overclocking, the ht treated me best __________________ CPU-Z validation sig pics temporarily blocked

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Oct 25, 2009, 09:34 PM	#4329
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,845 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	shouldnt bring you problems __________________ CPU-Z validation sig pics temporarily blocked

Oct 25, 2009, 09:58 PM	#4331
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,845 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	my biostar was fine for am2 procs. to not say: overpowered ;-) which revision do you own? __________________ CPU-Z validation sig pics temporarily blocked

Oct 25, 2009, 10:53 PM	#4333
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.94/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	guys, i7 has not crunched all day. Currently running some HDD tests and stuf to determine if its the HDD giving me the issues that I have. So far it has found some errors. I'll keep you'll posted. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Oct 26, 2009, 12:53 AM	#4340
Velvet Wafer Join Date: Jun 2009 Location: North of Germany Posts: 3,845 (2.68/day) Thanks: 2,286 Thanked 1,025 Times in 838 Posts System Specs	cool the vrms over 1.35, if everything fails, simply hack,drill and saw a non compatible cooler in form, thats what i will do tomorrow ;-) have cleaned the board a few min ago,and i am looking at it atm PS. you could use enzotech copper sinks, but these you would have to glue with arctic adhesive one day, i will build something, that allows me to reset my bios on button press __________________ CPU-Z validation sig pics temporarily blocked

Oct 26, 2009, 06:21 PM	#4345
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,601 (4.46/day) Thanks: 2,269 Thanked 3,187 Times in 1,922 Posts System Specs	My Q9550 @ 3.4 put up a respectable 2800 Boinc yesterday Im sure that includes some carry over, anxious to see what the new average for this rig is with its OC! __________________ My Heatware Feedback 129+ Pristine

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	Asrock Z77E-ITX
Cooling:	Corsair H100 w/ SP120s
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	MSI GTX 580 TFIII LIGHTNING (875c@1.006v)
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	BitFenix Prodigy White
PSU:	Antec TruePower New Blue 750w
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

Oct 26, 2009, 06:22 PM	#4346
Laurijan Join Date: Feb 2007 Location: Oulu, Finland Posts: 1,935 (0.84/day) Thanks: 270 Thanked 352 Times in 282 Posts System Specs	I have this in mind or to say it more accurate all over my mind: http://forums.techpowerup.com/showth...75#post1609475 __________________ If you want to quit smoking tobacco this is a must see: ☆☆☆The Electronic-Cigarette Club☆☆☆ @ GN.net Laurijan´s Heat My worldwide sales thread

System Name:	Enslaver :)
Processor:	Intel i5 3570K Ivy Bridge
Motherboard:	ASRock Z77 Extreme4
Cooling:	CPU: Noctua NH-D14, Case: 4x12cm Noctua
Memory:	8GB DDR3 Samsung 30nm MV-3V4G3
Video Card:	ASUS GTX560Ti DirectCUII TOP 1GB
Hard Disk:	OCZ Agility 3 120GB SSD for OS, Seagte internal 500GB Download-cache, Seagate external 2TB for Media
Optical Drive:	Samsung DVD-RW/RAM, LG DVD-RW/RAM
CRT/LCD Model:	Samsung UE40D6200 Full-HD 3D LED LCD TV
Case:	Antec P182, Gunmetal Black Edition
Sound Card:	Razer Barracuda AC-1 soundcard, Logitech Z-5450 5.1 speakers
PSU:	Termaltake Thoughpower 750W, Cable management
Software:	Windows 7 Ultimate SP1 x64

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Oct 26, 2009, 06:59 PM	#4350
Laurijan Join Date: Feb 2007 Location: Oulu, Finland Posts: 1,935 (0.84/day) Thanks: 270 Thanked 352 Times in 282 Posts System Specs	How fast is crunching in Ubuntu? __________________ If you want to quit smoking tobacco this is a must see: ☆☆☆The Electronic-Cigarette Club☆☆☆ @ GN.net Laurijan´s Heat My worldwide sales thread

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16535	May 20, 2013 01:31 AM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM