techPowerUp! Forums

Go Back   techPowerUp! Forums > Hardware > Motherboards & Memory

Reply
 
Thread Tools
Old Oct 30, 2009, 02:50 AM   #1
Paulieg
The Mad Moderator
 
Paulieg's Avatar
 
Join Date: Feb 2007
Location: Wherever I can find the iron.
Posts: 11,448 (5.02/day)
Thanks: 2,519
Thanked 3,054 Times in 2,098 Posts
Send a message via MSN to Paulieg

System Specs

EVGA p55 FTW bios update problem

OK, I've been spoiled rotten by Gigabyte and Asus with easy flashing utilities, and with DFI and Tmod's bios CD. However, now I'm trying to flash the bios on this new EVGA p55 FTW motherboard. I've tried the method described below direct from EVGA (not sure what they mean by CD. I think that's a typo), and I can't get it to work. Any ideas?

The following drivers/files are available for your hardware and operating system combination.


Note: If you are having difficulties downloading the driver file, please make sure you completely disable any third party download managers.


Bios Version : A39
BIOS Date : 10/26/2009
Bios File : E657_A39.zip (Primary Download Link)
Notes :
The following has been updated in A35:
Improved XMP Support
Adds IDE Config into Profile Saving
Improves VGA Compatibility

INSTRUCTIONS: BIOS updating can be accomplished VIA the below method:
CD Method (Blank CD and CD Rewritable Drive Required)
Download the following .zip file: E657_A35.zip
Go into the folder where you unzipped this package and run the appropriate batch file.
For Windows XP, Vista or 7 32Bit: AFUWIN32.BAT
For Windows XP, Vista or 7 64Bit: AFUWIN64.BAT
Press Y in CAPITAL LETTERS.
DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
After the flashing is finished, shut down the computer. Then power on again and go into BIOS, Load Defaults, Save and Exit
Warning:
**Do not restart or interrupt your PC while the flash is ongoing
**Do not Flash BIOS on overclocked settings
**It is always recommended to power-down after flash
Legacy BIOS:
E657_A35.zip
E657_A29.zip
E657_A27.zip

A35 Updates:
Improved XMP Support
Adds IDE Config into Profile Saving
Improves VGA Compatibility

A29 Updates:
Unlocks Mem CFG for CPU Tweaker Support

A27 Updates:
Unlocks Mem CFG for CPU Tweaker Support
Updates system starting in Safe Mode when insert key is depressed on PS2 Keyboard
__________________
"I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds."
-Henry Rollins


My heatware
Save lives by joining the TPU WCG team!

Last edited by Paulieg; Oct 30, 2009 at 03:00 AM.
Paulieg is offline  
Reply With Quote
Old Oct 30, 2009, 02:54 AM   #2
Solaris17
Creator Solaris Utility DVD
 
Solaris17's Avatar
 
Join Date: Aug 2005
Location: Reinacting scenes from platoon with Charlie Sheen
Posts: 13,708 (4.84/day)
Thanks: 4,365
Thanked 3,295 Times in 2,311 Posts
Send a message via ICQ to Solaris17 Send a message via AIM to Solaris17 Send a message via MSN to Solaris17 Send a message via Yahoo to Solaris17 Send a message via Skype™ to Solaris17

System Specs

um all i see is a drivers not found section?...anyway from personal experience with EVGA boards i have never had one that will update through windows nor do i bealive that EVGA makes a utility to do so. the easiest way...make a boot disk drop in your bios..and flash away booting from floppy/cd/usb thats how i do it..if you need the files let me know...
__________________
I Made the Millionth post! | "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij
PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware
NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide
Vista Mark
Solaris17 is offline  
Reply With Quote
The Following User Says Thank You to Solaris17 For This Useful Post:
Old Oct 30, 2009, 02:56 AM   #3
WarEagleAU
Bird of Prey
 
WarEagleAU's Avatar
 
Join Date: Jul 2006
Location: Gurley, AL
Posts: 9,994 (3.99/day)
Thanks: 3,810
Thanked 557 Times in 521 Posts
Send a message via AIM to WarEagleAU Send a message via Yahoo to WarEagleAU

System Specs

Me too but have you tried using your thumb drive and doing it that way? I thought EVGA had a bios way of flashing as well.
__________________
=-TheEagle-=



http://www.heatware.com/eval.php?id=62454
“You crazy? Surfing any website without an antivirus is like freaking with a dirty woman without protection” -OzzmanFloyd120
- Edited for content and clarity
WarEagleAU is offline  
Reply With Quote
Old Oct 30, 2009, 02:57 AM   #4
DanishDevil
Eligible for custom title
 
DanishDevil's Avatar
 
Join Date: Oct 2005
Location: Newport Beach, CA
Posts: 8,631 (3.10/day)
Thanks: 1,361
Thanked 2,018 Times in 1,585 Posts
Send a message via AIM to DanishDevil Send a message via MSN to DanishDevil

System Specs

So you did get one after all?
DanishDevil is offline  
Reply With Quote
Old Oct 30, 2009, 03:01 AM   #5
Paulieg
The Mad Moderator
 
Paulieg's Avatar
 
Join Date: Feb 2007
Location: Wherever I can find the iron.
Posts: 11,448 (5.02/day)
Thanks: 2,519
Thanked 3,054 Times in 2,098 Posts
Send a message via MSN to Paulieg

System Specs

Quote:
Originally Posted by DanishDevil View Post
So you did get one after all?
Updated OP. Yup, got one, now I'm just trying to get the bios updated, and it's pissing me off.
__________________
"I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds."
-Henry Rollins


My heatware
Save lives by joining the TPU WCG team!
Paulieg is offline  
Reply With Quote
Old Oct 30, 2009, 03:01 AM   #6
mlee49
Eligible for custom title
 
mlee49's Avatar
 
Join Date: Dec 2007
Location: KU
Posts: 6,919 (3.51/day)
Thanks: 1,597
Thanked 2,044 Times in 1,600 Posts
Send a message via Skype™ to mlee49

System Specs

All I see are the P55 FTW giving batch files to update the BIOS. They run in windows and no burning needed, E657:
http://www.evga.com/forums/tm.asp?m=...ey=&#100989505

FTW 200:
http://www.evga.com/forums/tm.asp?m=...ey=&#100989521
__________________
mlee49 is offline  
Reply With Quote
The Following User Says Thank You to mlee49 For This Useful Post:
Old Oct 30, 2009, 03:03 AM   #7
Solaris17
Creator Solaris Utility DVD
 
Solaris17's Avatar
 
Join Date: Aug 2005
Location: Reinacting scenes from platoon with Charlie Sheen
Posts: 13,708 (4.84/day)
Thanks: 4,365
Thanked 3,295 Times in 2,311 Posts
Send a message via ICQ to Solaris17 Send a message via AIM to Solaris17 Send a message via MSN to Solaris17 Send a message via Yahoo to Solaris17 Send a message via Skype™ to Solaris17

System Specs

o well if its a batch you should disable UAC and even if you did or want to keep it on you need to right click and run as admin thats what most of my failed batches need and i use batch to compile my disk so i need admin to write to disk etc this operation isnt that diffirent it probably needs access to the HAL
__________________
I Made the Millionth post! | "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij
PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware
NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide
Vista Mark
Solaris17 is offline  
Reply With Quote
The Following User Says Thank You to Solaris17 For This Useful Post:
Old Oct 30, 2009, 03:04 AM   #8
Paulieg
The Mad Moderator
 
Paulieg's Avatar
 
Join Date: Feb 2007
Location: Wherever I can find the iron.
Posts: 11,448 (5.02/day)
Thanks: 2,519
Thanked 3,054 Times in 2,098 Posts
Send a message via MSN to Paulieg

System Specs

Quote:
Originally Posted by mlee49 View Post
All I see are the P55 FTW giving batch files to update the BIOS. They run in windows and no burning needed, E657:
http://www.evga.com/forums/tm.asp?m=...1&key=�

FTW 200:
http://www.evga.com/forums/tm.asp?m=...1&key=�
I know. That's the issue.I've attempted to run the batch file directly from the downloaded file, but the cmd box disappears once I type in "Y" and hit enter.

Quote:
Originally Posted by Solaris17 View Post
o well if its a batch you should disable UAC and even if you did or want to keep it on you need to right click and run as admin thats what most of my failed batches need and i use batch to compile my disk so i need admin to write to disk etc this operation isnt that diffirent it probably needs access to the HAL
I tried running it as admin already. No luck.
__________________
"I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds."
-Henry Rollins


My heatware
Save lives by joining the TPU WCG team!
Paulieg is offline  
Reply With Quote
Old Oct 30, 2009, 03:06 AM   #9
AthlonX2
Better Than You
 
AthlonX2's Avatar
 
Join Date: Sep 2006
Location: Toledo,Ohio
Posts: 5,449 (2.25/day)
Thanks: 729
Thanked 1,572 Times in 994 Posts

System Specs

run as administrator
AthlonX2 is offline  
Reply With Quote
The Following User Says Thank You to AthlonX2 For This Useful Post:
Old Oct 30, 2009, 03:06 AM   #10
Paulieg
The Mad Moderator
 
Paulieg's Avatar
 
Join Date: Feb 2007
Location: Wherever I can find the iron.
Posts: 11,448 (5.02/day)
Thanks: 2,519
Thanked 3,054 Times in 2,098 Posts
Send a message via MSN to Paulieg

System Specs

Quote:
Originally Posted by AthlonX2 View Post
run as administrator
See my last post.
__________________
"I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds."
-Henry Rollins


My heatware
Save lives by joining the TPU WCG team!
Paulieg is offline  
Reply With Quote
Old Oct 30, 2009, 03:07 AM   #11
Solaris17
Creator Solaris Utility DVD
 
Solaris17's Avatar
 
Join Date: Aug 2005
Location: Reinacting scenes from platoon with Charlie Sheen
Posts: 13,708 (4.84/day)
Thanks: 4,365
Thanked 3,295 Times in 2,311 Posts
Send a message via ICQ to Solaris17 Send a message via AIM to Solaris17 Send a message via MSN to Solaris17 Send a message via Yahoo to Solaris17 Send a message via Skype™ to Solaris17

System Specs

Quote:
Originally Posted by Paulieg View Post

I tried running it as admin already. No luck.
after you extracted the files? beause it wont work right reading from the archive.
__________________
I Made the Millionth post! | "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij
PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware
NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide
Vista Mark
Solaris17 is offline  
Reply With Quote
The Following User Says Thank You to Solaris17 For This Useful Post:
Old Oct 30, 2009, 03:08 AM   #12
AthlonX2
Better Than You
 
AthlonX2's Avatar
 
Join Date: Sep 2006
Location: Toledo,Ohio
Posts: 5,449 (2.25/day)
Thanks: 729
Thanked 1,572 Times in 994 Posts

System Specs

i never had an issue with my evga p55 sli,i downloaded extracted and ran as admin,but i did have UAC disabled.
AthlonX2 is offline  
Reply With Quote
The Following User Says Thank You to AthlonX2 For This Useful Post:
Old Oct 30, 2009, 03:08 AM   #13
Paulieg
The Mad Moderator
 
Paulieg's Avatar
 
Join Date: Feb 2007
Location: Wherever I can find the iron.
Posts: 11,448 (5.02/day)
Thanks: 2,519
Thanked 3,054 Times in 2,098 Posts
Send a message via MSN to Paulieg

System Specs

Quote:
Originally Posted by Solaris17 View Post
after you extracted the files? beause it wont work right reading from the archive.
I'm sure I did, but I'm going to try again...
__________________
"I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds."
-Henry Rollins


My heatware
Save lives by joining the TPU WCG team!
Paulieg is offline  
Reply With Quote
Old Oct 30, 2009, 03:09 AM   #14
Solaris17
Creator Solaris Utility DVD
 
Solaris17's Avatar
 
Join Date: Aug 2005
Location: Reinacting scenes from platoon with Charlie Sheen
Posts: 13,708 (4.84/day)
Thanks: 4,365
Thanked 3,295 Times in 2,311 Posts
Send a message via ICQ to Solaris17 Send a message via AIM to Solaris17 Send a message via MSN to Solaris17 Send a message via Yahoo to Solaris17 Send a message via Skype™ to Solaris17

System Specs

Quote:
Originally Posted by Paulieg View Post
I'm sure I did, but I'm going to try again...
try it with and without the bios in question extracted as well..and make sure everything is in one folder.
__________________
I Made the Millionth post! | "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij
PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware
NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide
Vista Mark
Solaris17 is offline  
Reply With Quote
The Following User Says Thank You to Solaris17 For This Useful Post:
Old Oct 30, 2009, 03:11 AM   #15
mlee49
Eligible for custom title
 
mlee49's Avatar
 
Join Date: Dec 2007
Location: KU
Posts: 6,919 (3.51/day)
Thanks: 1,597
Thanked 2,044 Times in 1,600 Posts
Send a message via Skype™ to mlee49

System Specs

Try opening a fresh command line and type the exact path and see if that works.

Ie open cmd and type, if the file is extracted to your desktop:
C:\Users\/*Yourusername*/\Desktop\...
__________________
mlee49 is offline  
Reply With Quote
The Following User Says Thank You to mlee49 For This Useful Post:
Old Oct 30, 2009, 03:16 AM   #16
Paulieg
The Mad Moderator
 
Paulieg's Avatar
 
Join Date: Feb 2007
Location: Wherever I can find the iron.
Posts: 11,448 (5.02/day)
Thanks: 2,519
Thanked 3,054 Times in 2,098 Posts
Send a message via MSN to Paulieg

System Specs

Quote:
Originally Posted by Solaris17 View Post
try it with and without the bios in question extracted as well..and make sure everything is in one folder.
LOL. It worked this time. Somehow, I must have not extracted the entire file the first time around. Bios is updated. Thanks for helping out guys. It's the first time in a long time that I've had trouble with a bios update...geez. Learning curve with different brands I guess.
__________________
"I have found the Iron to be my greatest friend. It never freaks out on me, never runs. Friends may come and go. But two hundred pounds is always two hundred pounds."
-Henry Rollins


My heatware
Save lives by joining the TPU WCG team!
Paulieg is offline  
Reply With Quote
The Following User Says Thank You to Paulieg For This Useful Post:
Old Oct 30, 2009, 03:18 AM   #17
Solaris17
Creator Solaris Utility DVD
 
Solaris17's Avatar
 
Join Date: Aug 2005
Location: Reinacting scenes from platoon with Charlie Sheen
Posts: 13,708 (4.84/day)
Thanks: 4,365
Thanked 3,295 Times in 2,311 Posts
Send a message via ICQ to Solaris17 Send a message via AIM to Solaris17 Send a message via MSN to Solaris17 Send a message via Yahoo to Solaris17 Send a message via Skype™ to Solaris17

System Specs

Quote:
Originally Posted by Paulieg View Post
LOL. It worked this time. Somehow, I must have not extracted the entire file the first time around. Bios is updated. Thanks for helping out guys. It's the first time in a long time that I've had trouble with a bios update...geez. Learning curve with different brands I guess.
good times man have fun
__________________
I Made the Millionth post! | "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij
PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware
NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide
Vista Mark
Solaris17 is offline  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
[FS/FT][US] (2) EVGA P55 SLI FTW & (2) Core i5 750 CPUs DanishDevil Buy/Sell/Trade/Giveaway Forum 12 Oct 13, 2009 05:38 PM
EVGA 780i SLI FTW BIOS Flava0ne General Hardware 2 Jun 23, 2009 03:35 PM
EVGA 680i SLI P33 BIOS Update Flava0ne General Hardware 1 May 17, 2009 04:40 AM
[WTB] Evga 780i FTW or 750i FTW + more Marcam923 Buy/Sell/Trade/Giveaway Forum 2 Mar 5, 2009 11:44 PM
how do i update the Evga bios with a bin file? Live OR Die Motherboards & Memory 2 Aug 14, 2007 10:02 AM


All times are GMT. The time now is 12:54 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
no new posts