How To: Enable SLI on pre-i7/i5 hardware - Page 96

r3b00t3r · Dec 7, 2009, 09:27 AM

Good morning!

It is my first post in this forum. I used to just read a lot here, and now here I am...

I successfully enabled SLI in my Asus P5Q Deluxe, with 2 EVGA GTX260 Core 216 55 nm SuperClocked, but only in the second or third try. I'm using Windows 7 Ultimate x64.

Just running SLI string and halmod didn't make it for me. I had to run install.cmd of halmod in the command prompt to see that new hal.dll was not replacing the old one. I had to boot in repair mode, use the command prompt and then replacing hal.dll. After that, no problem at all.

Now I want to remove the watermark. I tried that "testsigning off" command, but that messes with drivers and boot. It's a definitely a no-go.

If anyone has a solution for this, I would apreciate!

Thanks!

Schlingel · Dec 7, 2009, 10:36 AM

Try this one:

http://depositfiles.com/files/biezumj64

if x64 ->use ...64.exe

Reboot or Logg off and on again and it should be gone. Testsigning must be switched on from now on!

zmgbyn · Dec 7, 2009, 12:00 PM

mod driver on Quadro FX5600 test result:

Use mod driver 190.62 REV.2 ,Quadro driver 191.00

Use mod driver 190.62 REV.2 ,Quadro driver 190.38

Use mod driver 190.62 REV.2 ,GeFore driver 190.62

All the success case in xdevs is GeFore except derGhostrider( His chipset is 5520,only do SLIString install not mod hal or mod driver.)

I test this hack about 7 days, hal mod or mod driver ,all failed !
so i think Quadro must have some differents with GeFore !!!!!!!!!!!!

TiN Please test on Quadro or Let me to test your belta version!

note: form the picture above gpu-z can not detect PhysX Feature(whynever mod or not, is it a bug?)

TiN · Dec 7, 2009, 03:17 PM

zmgbyn

What certificate do you have in your DSDT? Please post complete name.

I have no Quadro cards, sorry.

I'm tired to repeat, HAL mod 0.9 DON'T show X58 in CPU-Z. It's fixed now, it only reports X58 to nv driver only. You must check this with Everest, on DSDT table section.

There is no any special beta version available

All mod is beta and is available for everybody from article and my server.

I still don't think that there is any difference Quadro/GeForce or issue with this in your case.
How many PCI-E slots do you have? Try to change slots. Maybe you got VGAs connected to different hubs, in this case SLI don't work.

BCShooter · Dec 7, 2009, 07:49 PM

I can confirm that it works on a GA-G1975X motherboard with 2 7600GTs using XP Pro 32bit.

I downloaded Forceware 190.62, SListringer, and the modded HAL.DLL from

Code:

http://xdevs.com/e107_plugins/content/content.php?content.30

I used Driver Sweeper to remove my old Nvidia drivers and then installed the modded Hal.dll to windows\system32 folder. I made a back up copy of the original just incase. I restarted after that so that windows would see the change in my chipset.

I then ran SLIstringer using the Asus option and then installed the modded drivers. Restarted and copied the original Hal.dll back to windows\system32 folder. Restarted again so XP would see my original chipset again.

zmgbyn · Dec 8, 2009, 03:25 AM

Quote:

Originally Posted by TiN

zmgbyn

What certificate do you have in your DSDT? Please post complete name.

I have no Quadro cards, sorry.

I'm tired to repeat, HAL mod 0.9 DON'T show X58 in CPU-Z. It's fixed now, it only reports X58 to nv driver only. You must check this with Everest, on DSDT table section.

There is no any special beta version available

All mod is beta and is available for everybody from article and my server.

I still don't think that there is any difference Quadro/GeForce or issue with this in your case.
How many PCI-E slots do you have? Try to change slots. Maybe you got VGAs connected to different hubs, in this case SLI don't work.

I use HAL mod 0.9, Everest don't show x58 too,so i think hal mod 0.9 don't work on my system(other hal mod work,SLI option don't show). Attached file is my DSDT.

I have two PCI-E slots,change the VGA card. "VGAs connected to different hubs, in this case SLI don't work" means what?

zmgbyn · Dec 8, 2009, 11:43 AM

more test on Quadro FX5600(winxp 32bit eng):

mod driver and HAL mod both tested, no SLI option appear.

HAL mod and 191.00 xp driver:

I tested this hack on winxp x86 and win7 x64,all the same, no SLI option appear, also change the card's slot!
so i think this hack on Quadro has some bug, Anybody can test this hack on Quadro?

TheWolf · Dec 8, 2009, 02:20 PM

Check in board bios if APCI 2.0 is enabled.

zmgbyn · Dec 8, 2009, 05:56 PM

Quote:

Originally Posted by TheWolf

Check in board bios if APCI 2.0 is enabled.

sure!

jabberwooky · Dec 8, 2009, 08:20 PM

Had much fun benching with two 6600 GT & 195.62

NO FAKE !

Ridemetal · Dec 8, 2009, 08:31 PM

Cool.

TiN · Dec 9, 2009, 12:05 AM

Quote:

& 195.62

How can that be?
I miss something, you don't have HAL modified to report X58, but have 195.xx driver and SLI certificate.

Can you post full string of certificate to try this out? What did you do to enable SLI on 195 driver. I tried 195 WHQLs on fresh Win7 32bit with 3 8800Ultras on CERTIFIED SLI mobo (ASUS maximus 3 formula, P55 chipset) and NO SLI.

Velvet Wafer · Dec 9, 2009, 02:55 AM

Quote:

Originally Posted by TiN

How can that be?
I miss something, you don't have HAL modified to report X58, but have 195.xx driver and SLI certificate.

Can you post full string of certificate to try this out? What did you do to enable SLI on 195 driver. I tried 195 WHQLs on fresh Win7 32bit with 3 8800Ultras on CERTIFIED SLI mobo (ASUS maximus 3 formula, P55 chipset) and NO SLI.

my Hal.dll is modded, and reports as 790gx, as usual... on all calls, except forcewares... everest,cpuz etc. work normal. is this normal?... i thought, i saw it on a screen a few pages before...

p_o_s_pc · Dec 9, 2009, 03:09 AM

Quote:

Originally Posted by Velvet Wafer

my Hal.dll is modded, and reports as 790gx, as usual... on all calls, except forcewares... everest,cpuz etc. work normal. is this normal?... i thought, i saw it on a screen a few pages before...

it shows (showed) mine as a 790gx after the hal mod so i would say its normal

TiN · Dec 9, 2009, 04:57 AM

Ok, but how about 195 drivers?

TheWolf · Dec 9, 2009, 10:30 AM

Quote:

Originally Posted by TiN

Ok, but how about 195 drivers?

Yea I saw that & was wondering the same?
I hadn't tested 195 because of what others had said earlier, "it wasn't working".

Guess I could make a quick test, let you know what I find, later.

TheWolf · Dec 9, 2009, 11:08 AM

Quote:

Originally Posted by TheWolf

Yea I saw that & was wondering the same?
I hadn't tested 195 because of what others had said earlier, "it wasn't working".

Guess I could make a quick test, let you know what I find, later.

Quick test with 195.62, lost being able to enable SLI in NVIDIA control panel.
Back to 190.62 after system restore, option return to enable SLI.

This was done with Hal.mod.dll in place, haven't tested with modded nvidia.sys driver.

TheWolf · Dec 9, 2009, 12:02 PM

Tested 195.62 by using modded nvlddmkm.sys for W7 64bit, still no option to enable SLI.
Someone else will have to test Windows XP, I longer have the HDD with XP installed in the computer.
Back to 190.62 option to enable SLI returns.

MikeTyson · Dec 10, 2009, 10:47 AM

Hey guys I'm trying to figure out from reading this thread how you guys are getting SLi to work on Crossfire boards but I can't seem to get it!

Can someone explain how I can get 2x 7950GTs working on my ASUS P5W DH Deluxe (975x) please?

dolf · Dec 10, 2009, 08:42 PM

Quote:

Originally Posted by r3b00t3r

Good morning!

It is my first post in this forum. I used to just read a lot here, and now here I am...

I successfully enabled SLI in my Asus P5Q Deluxe, with 2 EVGA GTX260 Core 216 55 nm SuperClocked, but only in the second or third try. I'm using Windows 7 Ultimate x64.

Just running SLI string and halmod didn't make it for me. I had to run install.cmd of halmod in the command prompt to see that new hal.dll was not replacing the old one. I had to boot in repair mode, use the command prompt and then replacing hal.dll. After that, no problem at all.

Now I want to remove the watermark. I tried that "testsigning off" command, but that messes with drivers and boot. It's a definitely a no-go.

If anyone has a solution for this, I would apreciate!

Thanks!

I am using "watermark remover" which solves the problem completely

.

You can try this: http://www.mydigitallife.info/2009/0...de-on-desktop/ or search google for similar program called "watermark remover".

p_o_s_pc · Dec 10, 2009, 08:56 PM

when i get my board i am going to try this on a really old chipset(Intel 915) and 2 8800GT's under Win 7 64bit..

should be a big bottleneck if i get it to work

d3fct · Dec 10, 2009, 09:14 PM

Quote:

Originally Posted by MikeTyson

Hey guys I'm trying to figure out from reading this thread how you guys are getting SLi to work on Crossfire boards but I can't seem to get it!

Can someone explain how I can get 2x 7950GTs working on my ASUS P5W DH Deluxe (975x) please?

alot depends on your os i had no trouble at all with xp pro x86. I got my information from here, Link
make sure to read it over and follow the steps for your os. i did mine on a asus p5 deluxe.Link

MikeTyson · Dec 10, 2009, 10:30 PM

Quote:

Originally Posted by d3fct

alot depends on your os i had no trouble at all with xp pro x86. I got my information from here, Link
make sure to read it over and follow the steps for your os. i did mine on a asus p5 deluxe.Link

Wow, thank you!

I will try it when I get hold of the second card and let you know what happens

TiN · Dec 11, 2009, 12:03 AM

What for use google translate? Chineese ? Noway

http://slipatch.com already english.

d3fct · Dec 11, 2009, 12:09 AM

was just a page i found in a search

Processor:	Intel Q9550 E0 @ 3825MHz
Motherboard:	Asus P5Q Deluxe
Cooling:	Thermalright Ultra Extreme 120 Black + 10 X Noctua P12
Memory:	2X2GB GSkill Ripjaws 1200MHz 1.9V @ 5-5-5-15
Video Card:	2 X EVGA GTX260 Core 216 55 nm SuperClocked @ SLI
Hard Disk:	1 X SSD GSKILL FALCON I 128GB + 1 X Samsung F3 2TB + 2 X Samsung F3 1TB @ RAID1
Optical Drive:	Asus DVDRW
CRT/LCD Model:	Samsung 223BW
Case:	modded Lian Li A77
Sound Card:	Creative X-Fi Xtreme Music
PSU:	Corsair HX620
Software:	Windows 7 Ultimate x64
Benchmarks:	about P22000 in 3DMark Vantage

System Name:	Dont know
Processor:	AMD Phenom II X3 720BE
Motherboard:	MSI 790FX-GD70
Cooling:	Water
Memory:	4x2GB DDR3@DDR3-1333
Video Card:	2x Zotac Synergy GTX 260
Hard Disk:	7x WD6401AALS, 1x WD8088AADS, 1x 250GB Seagate
Optical Drive:	LG
CRT/LCD Model:	Samsung 245B
Case:	Lian Li A7110B
Sound Card:	onboard
PSU:	Corsair HX850W
Software:	Windows 7 Professional x64

Dec 7, 2009, 12:00 PM	#2378
zmgbyn Join Date: Dec 2009 Posts: 15 (0.01/day) Thanks: 4 Thanked 0 Times in 0 Posts	mod driver on Quadro FX5600 test result: Use mod driver 190.62 REV.2 ,Quadro driver 191.00 Use mod driver 190.62 REV.2 ,Quadro driver 190.38 Use mod driver 190.62 REV.2 ,GeFore driver 190.62 All the success case in xdevs is GeFore except derGhostrider( His chipset is 5520,only do SLIString install not mod hal or mod driver.) I test this hack about 7 days, hal mod or mod driver ,all failed ! so i think Quadro must have some differents with GeFore !!!!!!!!!!!! TiN Please test on Quadro or Let me to test your belta version! note: form the picture above gpu-z can not detect PhysX Feature(whynever mod or not, is it a bug?) Last edited by zmgbyn; Dec 7, 2009 at 12:05 PM.

System Name:	selfmade caseless :D
Processor:	Intel 2600K, various Intel ES CPU's
Motherboard:	EVGA P67 FTW / EVGA SR-2 / :)
Cooling:	LN2
Memory:	DDR3
Video Card:	GTX 590 Zombie, other Zombies
Hard Disk:	3x1TB WD1002FAEX RAID5, Intel 320 300GB
Optical Drive:	Liteon DVDRW
CRT/LCD Model:	Dell U2711, 3008WFP, 2007FP, 2007FP
Case:	none
Sound Card:	Augidy 2 Platinum
PSU:	Enermax Revolution85+ 1050W / 1250W
Software:	W2k3 64bit SP1, FreeBSD, Win8
Benchmarks:	http://www.hwbot.org/community/user/tin?oldstyle=true

Dec 7, 2009, 07:49 PM	#2380
BCShooter Join Date: Dec 2009 Posts: 1 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	I can confirm that it works on a GA-G1975X motherboard with 2 7600GTs using XP Pro 32bit. I downloaded Forceware 190.62, SListringer, and the modded HAL.DLL from Code: http://xdevs.com/e107_plugins/content/content.php?content.30 I used Driver Sweeper to remove my old Nvidia drivers and then installed the modded Hal.dll to windows\system32 folder. I made a back up copy of the original just incase. I restarted after that so that windows would see the change in my chipset. I then ran SLIstringer using the Asus option and then installed the modded drivers. Restarted and copied the original Hal.dll back to windows\system32 folder. Restarted again so XP would see my original chipset again.

Dec 7, 2009, 09:27 AM	#2376
r3b00t3r Join Date: Dec 2009 Location: Alverca / Lisboa / Portugal Posts: 39 (0.03/day) Thanks: 8 Thanked 7 Times in 7 Posts System Specs	Good morning! It is my first post in this forum. I used to just read a lot here, and now here I am... I successfully enabled SLI in my Asus P5Q Deluxe, with 2 EVGA GTX260 Core 216 55 nm SuperClocked, but only in the second or third try. I'm using Windows 7 Ultimate x64. Just running SLI string and halmod didn't make it for me. I had to run install.cmd of halmod in the command prompt to see that new hal.dll was not replacing the old one. I had to boot in repair mode, use the command prompt and then replacing hal.dll. After that, no problem at all. Now I want to remove the watermark. I tried that "testsigning off" command, but that messes with drivers and boot. It's a definitely a no-go. If anyone has a solution for this, I would apreciate! Thanks!

Dec 7, 2009, 10:36 AM	#2377
Schlingel Join Date: Sep 2009 Posts: 43 (0.03/day) Thanks: 6 Thanked 2 Times in 2 Posts	Try this one: http://depositfiles.com/files/biezumj64 if x64 ->use ...64.exe Reboot or Logg off and on again and it should be gone. Testsigning must be switched on from now on!

Dec 7, 2009, 03:17 PM	#2379
TiN Join Date: Aug 2009 Location: Taipei Posts: 184 (0.13/day) Thanks: 8 Thanked 68 Times in 35 Posts System Specs	zmgbyn What certificate do you have in your DSDT? Please post complete name. I have no Quadro cards, sorry. I'm tired to repeat, HAL mod 0.9 DON'T show X58 in CPU-Z. It's fixed now, it only reports X58 to nv driver only. You must check this with Everest, on DSDT table section. There is no any special beta version available All mod is beta and is available for everybody from article and my server. I still don't think that there is any difference Quadro/GeForce or issue with this in your case. How many PCI-E slots do you have? Try to change slots. Maybe you got VGAs connected to different hubs, in this case SLI don't work.

Dec 8, 2009, 11:43 AM	#2382
zmgbyn Join Date: Dec 2009 Posts: 15 (0.01/day) Thanks: 4 Thanked 0 Times in 0 Posts	more test on Quadro FX5600(winxp 32bit eng): mod driver and HAL mod both tested, no SLI option appear. HAL mod and 191.00 xp driver: I tested this hack on winxp x86 and win7 x64,all the same, no SLI option appear, also change the card's slot! so i think this hack on Quadro has some bug, Anybody can test this hack on Quadro? Last edited by zmgbyn; Dec 8, 2009 at 12:23 PM.

Dec 8, 2009, 02:20 PM	#2383
TheWolf Join Date: Aug 2009 Location: Pascagoula, Ms Posts: 211 (0.15/day) Thanks: 80 Thanked 23 Times in 21 Posts System Specs	Check in board bios if APCI 2.0 is enabled. __________________ *{IX38QGT Q9650 * 9x450 @ 4.0Ghz} {G.Skill 2x2gb PC8000 @ 1066Mhz 5-5-5-15}** {IP35ProXE * CPU Q9550 * 8.5x450 3.8Ghz} {A-Data 2x2gb PC6400 @ 900Mhz 5-5-5-15} {AB9 QuadGT * CPU Q6600 * 9x380 @ 3.4Ghz} {A-DATA 2x1gb DDR2 PC6400 @ 950Mhz 5-5-5-15]

System Name:	TheWolf
Processor:	Q9650/Q9550
Motherboard:	Abit IP35ProXE/IX38QuadGT
Cooling:	Big Typhoon x4
Memory:	G-Skill/A-Data/SuperTalent
Video Card:	3x MSI 260GTX OC 2x216 1x192 shaders
Hard Disk:	Hitachi 80gb x2
Optical Drive:	Samsung SH-S183
CRT/LCD Model:	Norcent/Neovo
Case:	none/benching stations
Sound Card:	onboard
PSU:	Crosair TX650W
Software:	XP/W7

Dec 8, 2009, 08:20 PM	#2385
jabberwooky Join Date: Dec 2009 Posts: 2 (0.00/day) Thanks: 0 Thanked 0 Times in 0 Posts	Had much fun benching with two 6600 GT & 195.62 NO FAKE !

Dec 8, 2009, 08:31 PM	#2386
Ridemetal Join Date: Nov 2009 Posts: 22 (0.02/day) Thanks: 15 Thanked 2 Times in 2 Posts	Cool.

Processor:	Q6600
Motherboard:	Asus Rampage Formula
Cooling:	OCZ Vendetta
Memory:	OCZ DDR2 PC2-8500 / 1066 MHz / Reaper HPC Edition / 4GB
Video Card:	2x 8800 GTS 512
Case:	Antec 1200
PSU:	Antec NeoHE 550
Software:	Windows 7 Ultimate

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Dec 9, 2009, 04:57 AM	#2390
TiN Join Date: Aug 2009 Location: Taipei Posts: 184 (0.13/day) Thanks: 8 Thanked 68 Times in 35 Posts System Specs	Ok, but how about 195 drivers?

Dec 9, 2009, 12:02 PM	#2393
TheWolf Join Date: Aug 2009 Location: Pascagoula, Ms Posts: 211 (0.15/day) Thanks: 80 Thanked 23 Times in 21 Posts System Specs	Tested 195.62 by using modded nvlddmkm.sys for W7 64bit, still no option to enable SLI. Someone else will have to test Windows XP, I longer have the HDD with XP installed in the computer. Back to 190.62 option to enable SLI returns. __________________ *{IX38QGT Q9650 * 9x450 @ 4.0Ghz} {G.Skill 2x2gb PC8000 @ 1066Mhz 5-5-5-15}** {IP35ProXE * CPU Q9550 * 8.5x450 3.8Ghz} {A-Data 2x2gb PC6400 @ 900Mhz 5-5-5-15} {AB9 QuadGT * CPU Q6600 * 9x380 @ 3.4Ghz} {A-DATA 2x1gb DDR2 PC6400 @ 950Mhz 5-5-5-15]

Dec 10, 2009, 10:47 AM	#2394
MikeTyson Join Date: Dec 2009 Location: South East, United Kingdom Posts: 645 (0.51/day) Thanks: 75 Thanked 20 Times in 14 Posts System Specs	Hey guys I'm trying to figure out from reading this thread how you guys are getting SLi to work on Crossfire boards but I can't seem to get it! Can someone explain how I can get 2x 7950GTs working on my ASUS P5W DH Deluxe (975x) please?

System Name:	Swag
Processor:	Intel Xeon E3110 4GHz
Motherboard:	GIGABYTE GA-G31M-ES2L
Cooling:	Scythe Infinity I Push-Pull w/ AS5
Memory:	2x2GB Transcend 800MHz DDR2 @ 890MHz 1.9v
Video Card:	Palit nVIDIA GTX460 1GB 800/1600/2000
Hard Disk:	Crucial M4 64GB
CRT/LCD Model:	LG Flatron M1917TM 1280x1024 @ 60Hz
Sound Card:	Realtek HD Audio
PSU:	OCZ StealthXStream 2 600W
Software:	Windows 7 Professional 64-bit

Dec 10, 2009, 08:56 PM	#2396
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	when i get my board i am going to try this on a really old chipset(Intel 915) and 2 8800GT's under Win 7 64bit.. should be a big bottleneck if i get it to work __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	no remorse
Processor:	i7 2600k @ 4.7 ht on
Motherboard:	gigabyte z68x-ud3p-b3
Cooling:	xspc rasa cpu block, bitspower restop, mcp355
Memory:	4 x 4gb corsair vengance 1600 8-8-8-24
Video Card:	570 gtx
Hard Disk:	2x32 gb patriot ssd's in raid 0 (os & games) / 2 x 500gb barracuda (storage)
Optical Drive:	lite on dvd burner
CRT/LCD Model:	25 inch 1080p widescreen i-inc
Case:	cooler master haf x
Sound Card:	turtle beach earforce px21 headset (usb)
PSU:	corsair HX850
Benchmarks:	super pi 1m : 7.160 sec. 34,837 3dmark06

Dec 11, 2009, 12:03 AM	#2399
TiN Join Date: Aug 2009 Location: Taipei Posts: 184 (0.13/day) Thanks: 8 Thanked 68 Times in 35 Posts System Specs	What for use google translate? Chineese ? Noway http://slipatch.com already english. Last edited by TiN; Feb 13, 2011 at 12:45 AM.

Dec 11, 2009, 12:09 AM	#2400
d3fct Join Date: Jul 2009 Location: Upstate NewYork Posts: 1,078 (0.77/day) Thanks: 136 Thanked 167 Times in 147 Posts System Specs	was just a page i found in a search __________________ my Heatware my FS/FT thread 75% of the earth is covered by water, the rest is covered by revis island! J-E-T-S JETS JETS JETS!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to enable sli on dual 260m?	popswala	NVIDIA	5	Oct 6, 2009 02:21 PM
How to enable SATA-II and SLI on NForce4	W1zzard	Articles	28	Sep 29, 2009 07:41 AM
Guide: How to enable, use, and configure SLI on Linux.	Fox34	Linux / BSD / Mac OS X	67	Aug 25, 2009 04:00 AM
Notebook Hardware Control (NHC) 2.0 Pre-Release 06?	ho0dzy	Overclocking & Cooling	0	Sep 30, 2008 03:06 AM
How Do I Enable SLI?	flavaone	NVIDIA	7	Mar 7, 2008 05:17 PM