Need some testers - Page 3

Solaris17 · Dec 23, 2009, 09:23 PM

Quote:

Originally Posted by DRDNA

Done.

thanks

http://www.solarisutilitydvd.com/Dow...Markx64DNA.exe

try this one just for you

Broom2455 · Dec 23, 2009, 09:28 PM

same problem solaris all skip to low or high graphics

4605437 (1260) - winsat\main.cpp:2295: --- START 2008\6\19 18:27:31 PM ---
4605500 (1260) - winsat\main.cpp:1995: > DWM not running.
4605500 (1260) - winsat\main.cpp:2053: > EMD device detected to be off.
4605500 (1260) - mlib\syspowertools.cpp:0872: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4605500 (1260) - winsat\main.cpp:2108: > power policy saved.
4605562 (1260) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4605562 (1260) - winsat\main.cpp:2120: > power policy set to maximum.
4606343 (1260) - winsat\main.cpp:2756: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
4606359 (1260) - winsat\main.cpp:1161: > Running Assessment: features ''
4606921 (1260) - winsat\main.cpp:1436: > Assessment completed
4606937 (1260) - winsat\main.cpp:1161: > Running Assessment: mem '-mint 25 -maxt 30 -rn -nc'
4637640 (1260) - winsat\main.cpp:1436: > Assessment completed
4637734 (1260) - winsat\processresults.cpp:0672: Total physical mem available to the OS : 3.18 GB (3,420,205,056 bytes)
4637734 (1260) - winsat\processresults.cpp:0965: No D3D results - limiting D3D Score to 1.0
4637859 (1260) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4637859 (1260) - winsat\main.cpp:2155: > Power state restored.
4637875 (1260) - winsat\main.cpp:2174: > Not necessary to reenable EMD cache.
4637890 (1260) - winsat\main.cpp:3216: > exit value = 0.

Solaris17 · Dec 23, 2009, 09:29 PM

Quote:

Originally Posted by Broom2455

same problem solaris all skip to low or high graphics

4605437 (1260) - winsat\main.cpp:2295: --- START 2008\6\19 18:27:31 PM ---
4605500 (1260) - winsat\main.cpp:1995: > DWM not running.
4605500 (1260) - winsat\main.cpp:2053: > EMD device detected to be off.
4605500 (1260) - mlib\syspowertools.cpp:0872: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4605500 (1260) - winsat\main.cpp:2108: > power policy saved.
4605562 (1260) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4605562 (1260) - winsat\main.cpp:2120: > power policy set to maximum.
4606343 (1260) - winsat\main.cpp:2756: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE
4606359 (1260) - winsat\main.cpp:1161: > Running Assessment: features ''
4606921 (1260) - winsat\main.cpp:1436: > Assessment completed
4606937 (1260) - winsat\main.cpp:1161: > Running Assessment: mem '-mint 25 -maxt 30 -rn -nc'
4637640 (1260) - winsat\main.cpp:1436: > Assessment completed
4637734 (1260) - winsat\processresults.cpp:0672: Total physical mem available to the OS : 3.18 GB (3,420,205,056 bytes)
4637734 (1260) - winsat\processresults.cpp:0965: No D3D results - limiting D3D Score to 1.0
4637859 (1260) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
4637859 (1260) - winsat\main.cpp:2155: > Power state restored.
4637875 (1260) - winsat\main.cpp:2174: > Not necessary to reenable EMD cache.
4637890 (1260) - winsat\main.cpp:3216: > exit value = 0.

so it spits this out even when running tests indavidually? does it attempt to do any work or is that all that sows up on the screen?

Broom2455 · Dec 23, 2009, 09:35 PM

I've tried all tests at(6), Cpu, Memory, HDD etc all end up at choice of high/low graphics

the error report does'nt show up on the screen , I just opened up the winsat text file in notepad and pasted it into the reply

Solaris17 · Dec 23, 2009, 09:37 PM

Quote:

Originally Posted by Broom2455

I've tried all tests at(6), Cpu, Memory, HDD etc all end up at choice of high/low graphics

wtf? wow every test failing indavidually is weird. is that with the system in your specs?

EDIT:: so it doesnt show up on the screen but every test (including indavidual) immedietly goes to high or low? with no display on the screen?

DirectorC · Dec 23, 2009, 09:49 PM

CPU test ran fine. I then went to GPU test (high) and the screen went blank for a few seconds, then I saw the illuminating MS background thing but it just kept going... mostly, I don't like the fact that I didn't know what to expect/how long it would take/what was happening.

Arctucas · Dec 23, 2009, 09:49 PM

I get the High or Low Graphics prompt also for all tests.

XP Pro SP3 32.

Solaris17 · Dec 23, 2009, 09:53 PM

Quote:

Originally Posted by DirectorC

CPU test ran fine. I then went to GPU test (high) and the screen went blank for a few seconds, then I saw the illuminating MS background thing but it just kept going... mostly, I don't like the fact that I didn't know what to expect/how long it would take/what was happening.

each grfx test on low is 1min high 2min

Quote:

Originally Posted by Arctucas

I get the High or Low Graphics prompt also for all tests.

XP Pro SP3 32.

ok so XP isnt playing nice thanks to all. id thank you bu TPU has cut me off

im not allowed to thank right now.

ill get on the XP poblem ASAP. it seems the last x64 update has fixed everyones issue except DNA's and x32 for anyone other than XP users seems to work great. am i right so far?

Arctucas · Dec 23, 2009, 09:54 PM

I will give 7 a shot and let you know.

Solaris17 · Dec 23, 2009, 09:57 PM

Quote:

Originally Posted by Arctucas

I will give 7 a shot and let you know.

thanks if it works this time for DNA i think i know the issue. ill need to install XP on a spare rig on my end to figure out XP however. BUT its ok. because i just realized that i can drum roll................................make patches!!!!! so F#@$ DL'ing another 30mb. ill just patch you up unless i come out with a big update

stanhemi · Dec 23, 2009, 10:00 PM

windows 7x64

Arctucas · Dec 23, 2009, 10:00 PM

@Solaris17,

I just tried it on my Win7RC 32 bit, same issue.

Solaris17 · Dec 23, 2009, 10:03 PM

Quote:

Originally Posted by stanhemi

http://img.techpowerup.org/091223/Capturerrrrr.jpg
windows 7x64

pro or ultimate ed?

Quote:

Originally Posted by Arctucas

@Solaris17,

I just tried it on my Win7RC 32 bit, same issue.

32 version of the prog right?

Arctucas · Dec 23, 2009, 10:04 PM

Quote:

Originally Posted by Solaris17

pro or ultimate ed?

32 version of the prog right?

Correct.

stanhemi · Dec 23, 2009, 10:04 PM

ultimate

DirectorC · Dec 23, 2009, 10:06 PM

Quote:

Originally Posted by Solaris17

each grfx test on low is 1min high 2min

cool. maybe you could add some prompts letting the user know this stuff

Solaris17 · Dec 23, 2009, 10:10 PM

Quote:

Originally Posted by Arctucas

Correct.

ok thanks

Quote:

Originally Posted by stanhemi

ultimate

could you go to C:\windows\ and grab me the entire performance folder?

Quote:

Originally Posted by DirectorC

cool. maybe you could add some prompts letting the user know this stuff

ya sure NP i will i just need to make sure this all works. then ill work on the cosmetics

stanhemi · Dec 23, 2009, 10:15 PM

yes no problem but how I send you that (46mb)

Noxman · Dec 23, 2009, 10:25 PM

DL: XPmark x64
All tests (Nr: 6)
Vista Ultimate x64

Solaris17 · Dec 23, 2009, 10:27 PM

Quote:

Originally Posted by Noxman

http://data.fuskbugg.se/skalman01/xpmark.jpg

DL: XPmark x64
All tests (Nr: 6)
Vista Ultimate x64

awesome thanks a bunch man! im thinking their is some kind of diffirence with the vista and 7 files but it shouldnt be a problem it will just take me a little bit of time to figure out which file is giving some people trouble. no worries i should have a working version for everyone either later tonight or sometime tommarrow.

FordGT90Concept · Dec 23, 2009, 10:43 PM

Does not work on XP Professional x64 with x64 binary.

Code:

                  ### ### #####   ##     ##            #
                   #   #   #   #   ##   ##             #
                    # #    #   #   ##   ##  ###  ## #  #  #
                     #     ####    # # # #  #  #  ##   # #
                    # #    #       # # # #   ###  #    ##
                   #   #   #       #  #  #  #  #  #    # #
                  ### ### ###     ### # ### #### ###  ##  #

                        Brought to you by Solaris17
                            www.TechPowerUp.com


        ********This is BETA Software and is not Guaranteed Stable.********
When the benchmark begins at any time Press ESC to Quit,
The current test and automatically begin the next.
After all tests are completed the benchmark will Halt to a Prompt.
If you do not wish to continue the tests at any time simply exit the prompt.

                                CHANGE LOG
Added better XP Compatability.
Added go back option to end of every test.

Press any key to continue . . .


1 = Cpu

2 = Graphics

3 = Memory

4 = HDD

5 = Media

6 = Run All

Select Cpu(1) or Graphics(2) or Memory(3) or Hard Drive(4) or Media(5) or All(6)
.
6



There isnt going to be comming anything in fullscreen here! its all console work
!


1 = Start

2 = Go back


Select Start or Go Back.
1


Windows System Assessment Tool
> Running the Formal Assessment
Press any key to continue . . .



1 = Go back to main Menu

2 = Quit


2

==============
Bench is done!
==============

Press any key to exit

Edit: I see a problem but it is not necessarily "thee" problem. Your installer is not x64 compatible. It installs your 64-bit app to the 32-bit program files directory. Moreover, Task Manager says the application is running as a 32-bit binary under the name "XP Mark 2.2.5 x32.exe"

Solaris17 · Dec 23, 2009, 11:02 PM

Quote:

Originally Posted by FordGT90Concept

Does not work on XP Professional x64 with x64 binary.

Code:

                  ### ### #####   ##     ##            #
                   #   #   #   #   ##   ##             #
                    # #    #   #   ##   ##  ###  ## #  #  #
                     #     ####    # # # #  #  #  ##   # #
                    # #    #       # # # #   ###  #    ##
                   #   #   #       #  #  #  #  #  #    # #
                  ### ### ###     ### # ### #### ###  ##  #

                        Brought to you by Solaris17
                            www.TechPowerUp.com


        ********This is BETA Software and is not Guaranteed Stable.********
When the benchmark begins at any time Press ESC to Quit,
The current test and automatically begin the next.
After all tests are completed the benchmark will Halt to a Prompt.
If you do not wish to continue the tests at any time simply exit the prompt.

                                CHANGE LOG
Added better XP Compatability.
Added go back option to end of every test.

Press any key to continue . . .


1 = Cpu

2 = Graphics

3 = Memory

4 = HDD

5 = Media

6 = Run All

Select Cpu(1) or Graphics(2) or Memory(3) or Hard Drive(4) or Media(5) or All(6)
.
6



There isnt going to be comming anything in fullscreen here! its all console work
!


1 = Start

2 = Go back


Select Start or Go Back.
1


Windows System Assessment Tool
> Running the Formal Assessment
Press any key to continue . . .



1 = Go back to main Menu

2 = Quit


2

==============
Bench is done!
==============

Press any key to exit

Edit: I see a problem but it is not necessarily "thee" problem. Your installer is not x64 compatible. It installs your 64-bit app to the 32-bit program files directory. Moreover, Task Manager says the application is running as a 32-bit binary under the name "XP Mark 2.2.5 x32.exe"

well i tell it were to install by default. as for the x32 part it is just a file name on my end. however it shouldnt really cause an issue running as 32bit because both versions will. they are the same code. the files that matter are the ones my executable invokes. the exe itself has the same code base as the x64 version. so far it seems like some sort of issue with XP itself. im thinking their is some kind of issue with the power managment that it doesnt like. but i will need to install it on a seperate system to figure it out.

Solaris17 · Dec 23, 2009, 11:21 PM

well i am going out of town for a few hours. i will look at the files and run some tests when i get home and hopefully tommarrow we will have a version of each that everyone can use!

keep it coming guys. if you do this will move really fast. again i appreciate all your help. i thought it worked perfect UL and im done. but iv gone through atleast 4 revisions since then and im not their yet. which just proves you guys are the best. thanks for helping me on my project.

FordGT90Concept · Dec 24, 2009, 12:00 AM

If you have no intention to compile a x64 binary, might I suggest having one version with both 32-bit and 64-bit winsat.exe and make it auto-detect (via the environmental variable PROCESSOR_ARCHITECTURE) which executable to use?

When I try to run WinSAT (6.1.7600.16385) directly, I get the following message:

The only time I've seen that message is with 16-bit apps on Windows x64. It shouldn't be 16-bit so it is a mystery as to why it would produce that error. This may give some clues as to what is wrong:
http://www.computerhope.com/issues/ch000726.htm

By the way, it is x86, not x32 (386, 486 -> x86; x86-64 -> x64). 32-bit and 64-bit are also proper but keep the naming conventions consistent.

DRDNA · Dec 24, 2009, 12:22 AM

Quote:

Originally Posted by Solaris17

thanks

http://www.solarisutilitydvd.com/Dow...Markx64DNA.exe

try this one just for you

Sorry Bro , but same thing on every test..end result is that last screenie ..again.

System Name:	Prometheus
Processor:	Xeon W 3520 4.5ghz
Motherboard:	DFI Lanparty UT t3eH8
Cooling:	Xigmatek Dark Knight
Memory:	(3x8GB) 24GB Avexir Core series triple channel 1600mhz
Video Card:	MSI GTX470
Hard Disk:	OCZ Agility3 120, SS 1TB, SS 2TB
Optical Drive:	Pioneer DVD Dual layer burner R+RW (Firmware Upgrade)/Philips lightscribe DVD burner Dual layer
CRT/LCD Model:	Dell 2007FP
Case:	Xigmatek Utgard
Sound Card:	ASUS Xonar D2X 7.1 on Logitec X-540/Razer Carcharias
PSU:	Corsair HX1000
Software:	Windows8 x64 \|\|Poser7, Cinema4D, CS5, 3DSM10, Lightwave9, Bryce7
Benchmarks:	I'm such a tease

Dec 23, 2009, 09:28 PM	#52
Broom2455 Join Date: Oct 2009 Location: Polk County FL Posts: 124 (0.09/day) Thanks: 28 Thanked 39 Times in 30 Posts System Specs	same problem solaris all skip to low or high graphics 4605437 (1260) - winsat\main.cpp:2295: --- START 2008\6\19 18:27:31 PM --- 4605500 (1260) - winsat\main.cpp:1995: > DWM not running. 4605500 (1260) - winsat\main.cpp:2053: > EMD device detected to be off. 4605500 (1260) - mlib\syspowertools.cpp:0872: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c' 4605500 (1260) - winsat\main.cpp:2108: > power policy saved. 4605562 (1260) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c' 4605562 (1260) - winsat\main.cpp:2120: > power policy set to maximum. 4606343 (1260) - winsat\main.cpp:2756: > IsOfficial=TRUE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE 4606359 (1260) - winsat\main.cpp:1161: > Running Assessment: features '' 4606921 (1260) - winsat\main.cpp:1436: > Assessment completed 4606937 (1260) - winsat\main.cpp:1161: > Running Assessment: mem '-mint 25 -maxt 30 -rn -nc' 4637640 (1260) - winsat\main.cpp:1436: > Assessment completed 4637734 (1260) - winsat\processresults.cpp:0672: Total physical mem available to the OS : 3.18 GB (3,420,205,056 bytes) 4637734 (1260) - winsat\processresults.cpp:0965: No D3D results - limiting D3D Score to 1.0 4637859 (1260) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c' 4637859 (1260) - winsat\main.cpp:2155: > Power state restored. 4637875 (1260) - winsat\main.cpp:2174: > Not necessary to reenable EMD cache. 4637890 (1260) - winsat\main.cpp:3216: > exit value = 0. __________________

System Name:	Building Up
Processor:	Q9550 E0 @3.6ghz 1.300 v
Motherboard:	Asus Striker II NSE FLASHED to STRIKER II EXTREME BIOS 1301
Cooling:	Corsair H50 mounted in 5 ¼ drive bays
Memory:	4gb CORSAIR XMS CMX4GX3M2A1600 CL9 @ 1700 mhz
Video Card:	GIGABYTE GTX 460 1GB OC@900/1800/1800
Hard Disk:	WD 640gb Black (SATA II), WD 1TB Caviar Green
Optical Drive:	HP 1060 d
CRT/LCD Model:	Samsung Syncmaster 2253 BW 22"
Case:	Coolermaster HAF 922
Sound Card:	Supreme x-fi and Logitech G35
PSU:	Corsair Hx750w
Software:	WIN7 64bit

System Name:	Prometheus
Processor:	Xeon W 3520 4.5ghz
Motherboard:	DFI Lanparty UT t3eH8
Cooling:	Xigmatek Dark Knight
Memory:	(3x8GB) 24GB Avexir Core series triple channel 1600mhz
Video Card:	MSI GTX470
Hard Disk:	OCZ Agility3 120, SS 1TB, SS 2TB
Optical Drive:	Pioneer DVD Dual layer burner R+RW (Firmware Upgrade)/Philips lightscribe DVD burner Dual layer
CRT/LCD Model:	Dell 2007FP
Case:	Xigmatek Utgard
Sound Card:	ASUS Xonar D2X 7.1 on Logitec X-540/Razer Carcharias
PSU:	Corsair HX1000
Software:	Windows8 x64 \|\|Poser7, Cinema4D, CS5, 3DSM10, Lightwave9, Bryce7
Benchmarks:	I'm such a tease

Dec 23, 2009, 09:35 PM	#54
Broom2455 Join Date: Oct 2009 Location: Polk County FL Posts: 124 (0.09/day) Thanks: 28 Thanked 39 Times in 30 Posts System Specs	I've tried all tests at(6), Cpu, Memory, HDD etc all end up at choice of high/low graphics the error report does'nt show up on the screen , I just opened up the winsat text file in notepad and pasted it into the reply __________________

Dec 23, 2009, 09:49 PM	#56
DirectorC Banned Join Date: Nov 2009 Location: Florizy Posts: 1,597 (1.21/day) Thanks: 90 Thanked 269 Times in 248 Posts System Specs	CPU test ran fine. I then went to GPU test (high) and the screen went blank for a few seconds, then I saw the illuminating MS background thing but it just kept going... mostly, I don't like the fact that I didn't know what to expect/how long it would take/what was happening.

System Name:	-= Son of a Whore =-
Processor:	E8400 @ 4.0GHz (445 x 9)
Motherboard:	Gigabyte GA-EP45-UD3R
Cooling:	Cooler Master Hyper 212+
Memory:	3GB Corsair XMS2
Video Card:	EVGA 8800 GT 512
Hard Disk:	74GB Raptor + Caviars in RAID0
CRT/LCD Model:	I-Inc 19" LCD 1440x900
Sound Card:	Audigy SE & Logitech X-540
PSU:	Corsair 750TX
Software:	Win32 v6.1.7600
Benchmarks:	Logitech KB & Sidewinder X3

Dec 23, 2009, 09:49 PM	#57
Arctucas Join Date: Jul 2006 Location: Cowtown, USSofA Posts: 1,634 (0.65/day) Thanks: 60 Thanked 278 Times in 219 Posts System Specs	I get the High or Low Graphics prompt also for all tests. XP Pro SP3 32.

System Name:	It's just a computer
Processor:	i7 950 @4.2GHz
Motherboard:	eVGA Classified 3
Cooling:	D5, PA140.3, HK Rev. 3.0
Memory:	Mushkin 998966 Radioactive
Video Card:	2x eVGA 01G-P3-1373-AR in SLI
Hard Disk:	4x 64GB G2 SSD RAID 0
Optical Drive:	Samsung SH-S223L
CRT/LCD Model:	Samsung 305T Plus
Case:	Thermaltake Xaser VI
Sound Card:	Auzen X-Meridian 7.1 2G/Z-5500
PSU:	Corsair AX1200
Software:	Win7 Ultimate x64 SP1
Benchmarks:	3DM Vantage 36196

Dec 23, 2009, 09:54 PM	#59
Arctucas Join Date: Jul 2006 Location: Cowtown, USSofA Posts: 1,634 (0.65/day) Thanks: 60 Thanked 278 Times in 219 Posts System Specs	I will give 7 a shot and let you know.

Dec 23, 2009, 10:00 PM	#61
stanhemi Join Date: Sep 2008 Location: Montreal,-Canada. Posts: 789 (0.45/day) Thanks: 628 Thanked 355 Times in 217 Posts System Specs	windows 7x64 __________________ ''I always wanted to be somebody, but now I realize I should have been more specific.'' RIG2 Q6600@3010mhz-Xiggy s1283-2g corsair xms 800-x1950 pro-enermax 485 watt-P5QPL-AM RIG3 P4 531@3600mhz-P5ld2-vm-1g ddr2 533 Rig4 AMD??-Asus M4A785TD-V-2x1g kingston ddr3 1333mhz-psu??? http://stats.free-dc.org/projusertag...94936&theme=14

System Name:	CRUNSHING MINI FARM
Processor:	Q9550 C1(lapped)@4105mhz 1,38vcore/Q6600 G0 @3010mhz 1,24vcore
Motherboard:	P5Q-E 8.5 x 483 fsb/P5QPL-AM 9x334fsb
Cooling:	watercooled storm,mcw60,2x240mm,micro res rev2,laing ddc3.2/Xig s1283(lapped)
Memory:	CORSAIR DOMINATOR 2X2G 1066MHZ@965-mhz 5-4-5-15/kingston kvr800mhz 2x1g
Video Card:	SAPPHIRRE 4870 1G @850/1020/ati x1950 pro
Hard Disk:	RAID0 2X RAPTOR 74gb/wd 250g
Optical Drive:	PIONNER DVD/lg dvd
CRT/LCD Model:	22'' LCD 1680x1050/lg 17" 1280x1024
Case:	Antec 900 white inside/crappy white case
Sound Card:	onboard/onboard
PSU:	ocz 700 watt mod xstream pro/enermax noiseblocker 485 watt
Software:	Windows 7 x64/vista 32
Benchmarks:	3dmark06 18950

Dec 23, 2009, 10:04 PM	#65
stanhemi Join Date: Sep 2008 Location: Montreal,-Canada. Posts: 789 (0.45/day) Thanks: 628 Thanked 355 Times in 217 Posts System Specs	ultimate __________________ ''I always wanted to be somebody, but now I realize I should have been more specific.'' RIG2 Q6600@3010mhz-Xiggy s1283-2g corsair xms 800-x1950 pro-enermax 485 watt-P5QPL-AM RIG3 P4 531@3600mhz-P5ld2-vm-1g ddr2 533 Rig4 AMD??-Asus M4A785TD-V-2x1g kingston ddr3 1333mhz-psu??? http://stats.free-dc.org/projusertag...94936&theme=14

Dec 23, 2009, 10:15 PM	#68
stanhemi Join Date: Sep 2008 Location: Montreal,-Canada. Posts: 789 (0.45/day) Thanks: 628 Thanked 355 Times in 217 Posts System Specs	yes no problem but how I send you that (46mb) __________________ ''I always wanted to be somebody, but now I realize I should have been more specific.'' RIG2 Q6600@3010mhz-Xiggy s1283-2g corsair xms 800-x1950 pro-enermax 485 watt-P5QPL-AM RIG3 P4 531@3600mhz-P5ld2-vm-1g ddr2 533 Rig4 AMD??-Asus M4A785TD-V-2x1g kingston ddr3 1333mhz-psu??? http://stats.free-dc.org/projusertag...94936&theme=14

Dec 23, 2009, 10:25 PM	#69
Noxman Join Date: Oct 2008 Location: Sweden Posts: 22 (0.01/day) Thanks: 0 Thanked 4 Times in 4 Posts System Specs	DL: XPmark x64 All tests (Nr: 6) Vista Ultimate x64

Processor:	PII 1090 @ 3.6GHz
Motherboard:	890GPA-UD3H
Cooling:	NH-U12P SE
Memory:	8GB Corsar XMS3 1600MHz
Video Card:	Sapphire HD6950 2GB
Hard Disk:	Samsung F1 500GB, Samsung F3 1TB
Optical Drive:	NEC DVD/CD
CRT/LCD Model:	BenQ 24"
Case:	Ace Gamer Edge 990
Sound Card:	Creative SB Audigy
PSU:	Antec Eartwatts 650W
Software:	W7 x64

System Name:	BY-2009
Processor:	Intel Core i7 920 (4 x 2.66 GHz) w/ HT and Turbo on
Motherboard:	DFI LP DK X58
Cooling:	Sythe MUGEN-2 w/ Stock Fan
Memory:	3 x 2 GiB OCZ Gold DDR3-1600 @ DDR-1066
Video Card:	Sapphire Vapor-X HD 5870 1 GiB (reference clocks)
Hard Disk:	2 x Seagate Barracuda 250GB 7200.7 RAID0, Seagate Barracuda 3TB 7200.14
Optical Drive:	Samsung 16x DVD-ROM, Pioneer 16x DVD+/-RW
CRT/LCD Model:	Samsung Syncmaster T240 24" LCD (1920x1200)
Case:	Coolermaster HAF 932
Sound Card:	Realtek Onboard, HT OMEGA Striker 7.1
PSU:	Enermax Platimax
Software:	Microsoft Windows 7 Ultimate x64
Benchmarks:	Faster than the tortoise; slower than the hare.

Dec 23, 2009, 11:21 PM	#73
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.79/day) Thanks: 4,366 Thanked 3,295 Times in 2,311 Posts System Specs	well i am going out of town for a few hours. i will look at the files and run some tests when i get home and hopefully tommarrow we will have a version of each that everyone can use! keep it coming guys. if you do this will move really fast. again i appreciate all your help. i thought it worked perfect UL and im done. but iv gone through atleast 4 revisions since then and im not their yet. which just proves you guys are the best. thanks for helping me on my project. __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

Dec 24, 2009, 12:00 AM	#74
FordGT90Concept "I go fast!1!11!1!" Join Date: Oct 2008 Location: IA, USA Posts: 10,648 (6.23/day) Thanks: 1,785 Thanked 2,632 Times in 1,986 Posts System Specs	If you have no intention to compile a x64 binary, might I suggest having one version with both 32-bit and 64-bit winsat.exe and make it auto-detect (via the environmental variable PROCESSOR_ARCHITECTURE) which executable to use? When I try to run WinSAT (6.1.7600.16385) directly, I get the following message: The only time I've seen that message is with 16-bit apps on Windows x64. It shouldn't be 16-bit so it is a mystery as to why it would produce that error. This may give some clues as to what is wrong: http://www.computerhope.com/issues/ch000726.htm By the way, it is x86, not x32 (386, 486 -> x86; x86-64 -> x64). 32-bit and 64-bit are also proper but keep the naming conventions consistent. __________________ Golden Rule of Programming: Never assume. try { SteamDownload(); } catch (Steamception ex) { RageQuit(); } Last edited by FordGT90Concept; Dec 24, 2009 at 12:09 AM.

System Name:	http://www.heatware.com/eval.php?id=73751
Processor:	i7-920 CO@4.2GHZ
Motherboard:	Asus P6T Deluxe Intel X58
Cooling:	Asetek Liquid CPU Cooling System
Memory:	CORSAIR DOMINATOR 6GB (3 x 2GB) DDR3 1600
Video Card:	2X ATI Radeon HD 4870 X2 2GB DDR5 PCI-Express
Hard Disk:	(RAID-0) with 4 Identical Hard Drives (1.28TB (320GBx4)
Optical Drive:	LG BLU-RAY/HD-DVD Reader / DVD±R/±RW Writer
CRT/LCD Model:	LG 50" 50PK550 1080p 600Hz Plasma/37 Inch WestingHouse @1920x1080
Case:	Thermaltake M9 (I hate it its like trying to live in a 1 inch box)
PSU:	ThermalTake ToughPower 1200 Watt
Software:	Windows 7 professional 64

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need testers with i910, i915 or G45	W1zzard	GPU-Z	4	Jun 13, 2009 07:44 AM
Firewall Testers	dcf-joe	General Software	4	Oct 3, 2008 09:46 PM
Planning some upgrades and need some opinions.	kuroikenshi	System Builder's Advice	3	Aug 8, 2008 12:40 AM
NVIDIA testers needed	W1zzard	ATITool	5	Aug 25, 2005 09:34 AM
Need testers with more than 1 ATI card in system	W1zzard	ATITool	4	Jan 20, 2005 12:34 AM