Techstation Clubhouse - Page 3

fatguy1992 · Dec 30, 2009, 05:35 AM

Well the cons would be...

Cost the same amount and draws as much power, yet higher temps
IMO it is more messy

Velvet Wafer · Dec 30, 2009, 05:38 AM

Quote:

Originally Posted by fatguy1992

Well the cons would be...

Cost the same amount and draws as much power, yet higher temps
IMO it is more messy

can you tell a phase, to not cool below 8 degrees?

i dont want minus, thats too dangerous in my opinion.
but about 8-15 degrees load, would be nice enough for my means.
how many watt, does such a device draws from the socket?
Why is it messy? water is always messy, as far as i knew ;-)

fatguy1992 · Dec 30, 2009, 05:41 AM

Yes it would be possible, you'd just use a small compressor and tune it for very high heat loads.

I'm not sure how much power it would draw, if your talking about the TEC and WC methods, just find out the main parts such as TEC, Fans pump etc, and look at their power draw.

Velvet Wafer · Dec 30, 2009, 05:44 AM

Quote:

Originally Posted by fatguy1992

Yes it would be possible, you'd just use a small compressor and tune it for very high heat loads.

I'm not sure how much power it would draw, if your talking about the TEC and WC methods, just find out the main parts such as TEC, Fans pump etc, and look at their power draw.

about 200-300 watt should it be, if im not wrong

you is such a phase constructed? i dont know anything about phase building,i must admit.
may you can explain a bit?

fatguy1992 · Dec 30, 2009, 05:45 AM

The power draw depends how many watts the TEC/s you are using are.

What would you like explained?

Velvet Wafer · Dec 30, 2009, 06:07 AM

Quote:

Originally Posted by fatguy1992

The power draw depends how many watts the TEC/s you are using are.

What would you like explained?

what can a + degree phase achieve, compared to oversized watercooling?

fatguy1992 · Dec 30, 2009, 06:24 AM

Better load holding, very small difference in idle vs load temps. Plus when you overclock it higher the temps won't rise as much.

Velvet Wafer · Dec 30, 2009, 06:30 AM

Quote:

Originally Posted by fatguy1992

Better load holding, very small difference in idle vs load temps. Plus when you overclock it higher the temps won't rise as much.

how many MHZ can that bring, very roughly? an estimation would be enough!

cdawall · Dec 30, 2009, 06:53 AM

here are some pics of mines all setup for what i got it for

bench session with a athlon II 250

bench session with a phenom II 550be

fatguy1992 · Dec 30, 2009, 07:47 AM

Quote:

Originally Posted by Velvet Wafer

how many MHZ can that bring, very roughly? an estimation would be enough!

Depends what CPU and how well your CPU clocks. I guess a i7 @ 4.6GHz HT+ shouldn't be too hard.

Velvet Wafer · Dec 30, 2009, 09:19 AM

Quote:

Originally Posted by fatguy1992

Depends what CPU and how well your CPU clocks. I guess a i7 @ 4.6GHz HT+ shouldn't be too hard.

well... a phenom 955, mediocre overclocking, and good in undervolting (tends to get too hot either)

(FIH) The Don · Dec 3, 2010, 07:28 PM

reviving this old thread again lol

after christmas i should be ordering this one

its funny, look over the thread again, many of you guys are folders/crunchers

how does you tech's look today? any changes? perhaps more added?

HammerON · Dec 4, 2010, 08:03 AM

Crappy pic:

(FIH) The Don · Dec 4, 2010, 08:05 AM

are you running dual 470s on a dual rad?

HammerON · Dec 4, 2010, 08:11 AM

Yep

(FIH) The Don · Dec 4, 2010, 08:12 AM

the joy of living in Alaska lol

HammerON · Dec 4, 2010, 09:21 AM

True - so true

oily_17 · Dec 4, 2010, 10:17 AM

Quote:

Originally Posted by (FIH) The Don

reviving this old thread again lol

after christmas i should be ordering this one

Good choice

I ordered the same test bench, only in white.

I should have my new bench by the middle of next week, just need some new tubing and a few more water cooling parts.

(FIH) The Don · Dec 13, 2010, 10:58 PM

did you get the bench yet oily?

im working on a few designs of a custom testbench with room for a couple rads, and other things

currently trying to get a little skill in sketchup, not that its easy lol,

made this one in paint the other day, just a rough sketch of one of the ideas i have atm

oily_17 · Dec 14, 2010, 07:36 AM

Quote:

Originally Posted by (FIH) The Don

did you get the bench yet oily?

im working on a few designs of a custom testbench with room for a couple rads, and other things

currently trying to get a little skill in sketchup, not that its easy lol,

made this one in paint the other day, just a rough sketch of one of the ideas i have atm

http://img.techpowerup.org/101213/te...eeeeeeeest.jpg

Still waiting on it ...

We are having some bad weather at the minute, and it has hit courier services bad.

I just sent an email off this morning, to see if it had been collected from the supplier yet.

I was hoping for an early Xmas present for myself

Sketckup is brilliant if you have the skill, which unfortunately I dont.
Keep us posted with the design ideas.

oily_17 · Dec 23, 2010, 11:44 AM

Well look what I collected today ....

Don't have alot of time to assemble it now, it will give me something to do on Christmas day after the turkey

Will try and upload more pics when it finished.I will have to get some new hardware to install on it, as the rig I was going to use is now in a different case

johnnyfiive · Dec 23, 2010, 09:35 PM

^^ Pics!!!

Heres my tech station, gotta love hardware stores.

It hosted many setups, the last one being my HTPC.

Can't wait to the see the tech stations oil and don!!

Chicken Patty · Dec 23, 2010, 09:45 PM

Lovely! Haven't seen peeps use DFI boards that much lately, nice to see one for a change.

HammerON · Dec 24, 2010, 07:54 AM

Nice tech johnnyfive

Here was mine a week ago:

I was unhappy with the MSI Big Bang (had problems oc to at least 4.2GHz) and put my Asus Sabertooth X58 board back in the mix. Much better overclocking

And I moved the 140mm fans to the back of the MONSTA rad and placed the red fan in the middle (still upset at Performance-PC for not sending 3 blue ones like I ordered).

(FIH) The Don · Dec 24, 2010, 07:58 AM

the tecchies are looking awesome guys

@hammer, i thought it was a good board :s
you talked to them? maybe they will send you a blue one instead?

tech looks awesome noe matter what

gonna make a list over the ones with stations later!

Processor:	W3570 - W3540 - Q6600 - Celeron 360
Motherboard:	EVGA X58 Classified - MSI X58 Eclipse - ASUS Commando
Cooling:	Kayl Custom Built Dual Stage Cascade - IFX-14
Memory:	Corsair DDR3 Dominator GT 6GB 1866MHz - Cellshock DDR2 4GB 1066MHz
Video Card:	2x EVGA GTX275 - 9400GT - 7600GT
Hard Disk:	Samsung 750GB HDD
Optical Drive:	Who Cares?
CRT/LCD Model:	Samsung 21.6' 2253LW
Case:	Antec 1200
Sound Card:	None
PSU:	TT 750watt - Coolermaster Real Power Pro 1000watt
Software:	Windows XP - Windows 7 - what else should I put here?
Benchmarks:	Too many to list :P

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

Processor:	W3570 - W3540 - Q6600 - Celeron 360
Motherboard:	EVGA X58 Classified - MSI X58 Eclipse - ASUS Commando
Cooling:	Kayl Custom Built Dual Stage Cascade - IFX-14
Memory:	Corsair DDR3 Dominator GT 6GB 1866MHz - Cellshock DDR2 4GB 1066MHz
Video Card:	2x EVGA GTX275 - 9400GT - 7600GT
Hard Disk:	Samsung 750GB HDD
Optical Drive:	Who Cares?
CRT/LCD Model:	Samsung 21.6' 2253LW
Case:	Antec 1200
Sound Card:	None
PSU:	TT 750watt - Coolermaster Real Power Pro 1000watt
Software:	Windows XP - Windows 7 - what else should I put here?
Benchmarks:	Too many to list :P

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

Processor:	W3570 - W3540 - Q6600 - Celeron 360
Motherboard:	EVGA X58 Classified - MSI X58 Eclipse - ASUS Commando
Cooling:	Kayl Custom Built Dual Stage Cascade - IFX-14
Memory:	Corsair DDR3 Dominator GT 6GB 1866MHz - Cellshock DDR2 4GB 1066MHz
Video Card:	2x EVGA GTX275 - 9400GT - 7600GT
Hard Disk:	Samsung 750GB HDD
Optical Drive:	Who Cares?
CRT/LCD Model:	Samsung 21.6' 2253LW
Case:	Antec 1200
Sound Card:	None
PSU:	TT 750watt - Coolermaster Real Power Pro 1000watt
Software:	Windows XP - Windows 7 - what else should I put here?
Benchmarks:	Too many to list :P

Dec 30, 2009, 05:35 AM	#51
fatguy1992 Join Date: Aug 2008 Location: Brisbane, Australia Posts: 386 (0.22/day) Thanks: 55 Thanked 47 Times in 46 Posts System Specs	Well the cons would be... Cost the same amount and draws as much power, yet higher temps IMO it is more messy

Dec 30, 2009, 05:41 AM	#53
fatguy1992 Join Date: Aug 2008 Location: Brisbane, Australia Posts: 386 (0.22/day) Thanks: 55 Thanked 47 Times in 46 Posts System Specs	Yes it would be possible, you'd just use a small compressor and tune it for very high heat loads. I'm not sure how much power it would draw, if your talking about the TEC and WC methods, just find out the main parts such as TEC, Fans pump etc, and look at their power draw.

Dec 30, 2009, 05:45 AM	#55
fatguy1992 Join Date: Aug 2008 Location: Brisbane, Australia Posts: 386 (0.22/day) Thanks: 55 Thanked 47 Times in 46 Posts System Specs	The power draw depends how many watts the TEC/s you are using are. What would you like explained?

Dec 30, 2009, 06:24 AM	#57
fatguy1992 Join Date: Aug 2008 Location: Brisbane, Australia Posts: 386 (0.22/day) Thanks: 55 Thanked 47 Times in 46 Posts System Specs	Better load holding, very small difference in idle vs load temps. Plus when you overclock it higher the temps won't rise as much.

Dec 30, 2009, 06:53 AM	#59
cdawall where the hell are my stars Join Date: Jul 2006 Location: some AF base Posts: 16,027 (6.42/day) Thanks: 457 Thanked 2,755 Times in 2,224 Posts System Specs	here are some pics of mines all setup for what i got it for bench session with a athlon II 250 bench session with a phenom II 550be __________________

System Name:	Deployment build
Processor:	Phenom II B97@4080mhz 1.6v (24/7 4800mhz max clock)
Motherboard:	Asus Crosshair V Formula
Cooling:	Coolermaster V10 modded to 96w TEC, Scientific Rulian fans
Memory:	4x4GB Wintec ONE@1800 9-10-9 1.62v (24/7)
Video Card:	Sapphire 7950 3GB@1150/1400 1.27v
Hard Disk:	2x32GB STT SSD's raid 0, 1TB Samsung F3's, 1.5TB Seagate 7200.11
CRT/LCD Model:	STi 22"
Case:	Thermaltake Commandar MS-I Epic Edition
Sound Card:	E07K USB DAC->Fischer FA-002W High edition
PSU:	Antec TPQ-850 (Antec TPQ-1200 waiting for it at home)
Software:	windows 7 ultimate x64

Dec 3, 2010, 07:28 PM	#62
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	reviving this old thread again lol after christmas i should be ordering this one its funny, look over the thread again, many of you guys are folders/crunchers how does you tech's look today? any changes? perhaps more added? __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

Dec 4, 2010, 08:03 AM	#63
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,366 (2.83/day) Thanks: 3,986 Thanked 2,883 Times in 1,546 Posts System Specs	Crappy pic:

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Dec 4, 2010, 08:05 AM	#64
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	are you running dual 470s on a dual rad? __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Dec 4, 2010, 08:11 AM	#65
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,366 (2.83/day) Thanks: 3,986 Thanked 2,883 Times in 1,546 Posts System Specs	Yep

Dec 4, 2010, 08:12 AM	#66
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	the joy of living in Alaska lol __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Dec 4, 2010, 09:21 AM	#67
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,366 (2.83/day) Thanks: 3,986 Thanked 2,883 Times in 1,546 Posts System Specs	True - so true

Processor:	Q9550 @3.8
Motherboard:	Asus Maximus Extreme
Cooling:	Custom water cooling
Memory:	4GB Patriot Viper DDR3 1600MHz
Video Card:	2x HD4870 512MB
Hard Disk:	2x 500GB
CRT/LCD Model:	3x LG L226WTQ 22" Widescreen LCD
Case:	Modded TJ07
Sound Card:	On board
PSU:	PC P&C Silencer 750
Software:	Windows 7 Ultimate

Dec 13, 2010, 10:58 PM	#69
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	did you get the bench yet oily? im working on a few designs of a custom testbench with room for a couple rads, and other things currently trying to get a little skill in sketchup, not that its easy lol, made this one in paint the other day, just a rough sketch of one of the ideas i have atm __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Dec 23, 2010, 11:44 AM	#71
oily_17 Join Date: Sep 2006 Location: Norn Iron Posts: 2,056 (0.84/day) Thanks: 214 Thanked 679 Times in 516 Posts System Specs	Well look what I collected today .... Don't have alot of time to assemble it now, it will give me something to do on Christmas day after the turkey Will try and upload more pics when it finished.I will have to get some new hardware to install on it, as the rig I was going to use is now in a different case __________________ Join The TPU Folding@home Team

Dec 23, 2010, 09:35 PM	#72
johnnyfiive Join Date: Apr 2008 Location: Tucson, AZ Posts: 2,975 (1.60/day) Thanks: 740 Thanked 856 Times in 537 Posts System Specs	^^ Pics!!! Heres my tech station, gotta love hardware stores. It hosted many setups, the last one being my HTPC. Can't wait to the see the tech stations oil and don!! __________________ [o_0] - GO BUCKEYES! ------------------------------------------------------ HEATWARE /MY KEYBOARD / VIDEO OF MY LGA 2011 RIG ------------------------------------------------------ Steam: johnnyfiive ORIGIN: johnny5iive League of Legends: 5iive

System Name:	K6-II 8320
Processor:	FX 8320 @ 4.7GHz (1.476v)
Motherboard:	Gigabyte 970 UD3
Cooling:	Corsair H100
Memory:	GSkill Ares 1866 8GB
Video Card:	Gigabyte 7870
Hard Disk:	Intel 330 120GB
Optical Drive:	LG R/W+/-[0_o]/
CRT/LCD Model:	Dell UltraSharp U2713HM
Case:	Corsair 400R
Sound Card:	Onboard
PSU:	Corsair GS700
Software:	Windows 8 Professional 64-Bit

Dec 23, 2010, 09:45 PM	#73
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	Lovely! Haven't seen peeps use DFI boards that much lately, nice to see one for a change. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Dec 24, 2010, 07:54 AM	#74
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,366 (2.83/day) Thanks: 3,986 Thanked 2,883 Times in 1,546 Posts System Specs	Nice tech johnnyfive Here was mine a week ago: I was unhappy with the MSI Big Bang (had problems oc to at least 4.2GHz) and put my Asus Sabertooth X58 board back in the mix. Much better overclocking And I moved the 140mm fans to the back of the MONSTA rad and placed the red fan in the middle (still upset at Performance-PC for not sending 3 blue ones like I ordered).

Dec 24, 2010, 07:58 AM	#75
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	the tecchies are looking awesome guys @hammer, i thought it was a good board :s you talked to them? maybe they will send you a blue one instead? tech looks awesome noe matter what gonna make a list over the ones with stations later! __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wallhanger Wood Techstation...latest iteration	CyberDruid	Cases, Modding & Electronics	16	Aug 11, 2009 04:32 PM
Banchetto 101 or Tecnofront HWD Techstation?	DanishDevil	Cases, Modding & Electronics	8	Jul 14, 2009 10:08 PM
Wood Techstation: Joinery Fun	CyberDruid	Cases, Modding & Electronics	1	Feb 27, 2009 09:24 PM
Tiny Techstation	CyberDruid	Cases, Modding & Electronics	13	Dec 9, 2008 05:46 PM
My TechStation (V3)	CyberDruid	Cases, Modding & Electronics	20	Jun 22, 2008 06:39 PM