TPU's WCG/BOINC Team - Page 244

theonedub · Jan 13, 2010, 06:36 PM

Should be much cooler. My MB did the same thing to my Phenom

Chicken Patty · Jan 13, 2010, 07:14 PM

That's good HAT. Especially since the rig is running full load all the time, running cooler would really help it out

hat · Jan 13, 2010, 08:25 PM

Well it was already really cool to start with. I lapped the processor and the heatsink and coretemp reported like 27c on linpack (even though there's no actual temp sensor for the core, it defaults to the socket temp). Right now it says 16c and it's been running wcg forever

I'm more happy about the power consumption. This board is a 95w max board, so the lower the volts I can run the cpu at the better.

Supreme0verlord · Jan 13, 2010, 08:43 PM

My main rig will be down the rest of the day, I just got my replacement CPU for my cruncher and I'm going to be testing it out. I'm hoping that it unlocks and OC's like mine.

mstenholm · Jan 13, 2010, 09:27 PM

Quote:

Originally Posted by hat

Right now it says 16c and it's been running wcg forever

Is that your 7750BE @ 3,00 GHz that runs at 16 degree C? Is it outside or in dry ice?

Supreme0verlord · Jan 13, 2010, 11:32 PM

Fck'n A, it unlocks and is stable at stock frequencies/voltages!

Now on too OC'ing to see what she can do!

hat · Jan 13, 2010, 11:36 PM

Quote:

Originally Posted by mstenholm

Is that your 7750BE @ 3,00 GHz that runs at 16 degree C? Is it outside or in dry ice?

No, it's just lapped and my cooler is lapped, and I have a proper thermal paste application.

It's not the temperature of the cpu core, it's the cpu socket temp.

ERazer · Jan 13, 2010, 11:43 PM

Quote:

Originally Posted by Supreme0verlord

Fck'n A, it unlocks and is stable at stock frequencies/voltages!

http://img.techpowerup.org/100113/X3...ock Stable.png
Now on too OC'ing to see what she can do!

Gratz bro

AlienIsGOD · Jan 13, 2010, 11:52 PM

NOICE!! More crunching powah !!!!!!

hat · Jan 14, 2010, 12:22 AM

For some reason, when stability testing (I noticed it while running Linx) my voltage changes on it's own. I have it set to 1.275 in the BIOS, and Coretemp will show it at 1.275v when it first loads up... but after running Linx for a while, it starts reading it as 1.325v... CPU-Z does it as well, it reads 1.280v on startup, but it goes to 1.328v after running Linx for a while. What's up?

Velvet Wafer · Jan 14, 2010, 12:24 AM

Quote:

Originally Posted by hat

For some reason, when stability testing (I noticed it while running Linx) my voltage changes on it's own. I have it set to 1.275 in the BIOS, and Coretemp will show it at 1.275v when it first loads up... but after running Linx for a while, it starts reading it as 1.325v... CPU-Z does it as well, it reads 1.280v on startup, but it goes to 1.328v after running Linx for a while. What's up?

your mosfets probabply heat up, or your PSU. i saw it many times during crunching, when my average temperature was too high. it also could be just the board overvolting during load. pretty normal tho.

hat · Jan 14, 2010, 12:50 AM

Well, I did it again, but this time with 1.325v set in the bios. Coretemp did not move from 1.325v, but Cpuz fluctuated between 1.328v and 1.360v depending on if it was loaded or not.

I forgot to mention that even after Linx was long done running, Coretemp and CPU-Z were still showing 1.325v, even though they were showing 1.275v origionally.

Chicken Patty · Jan 14, 2010, 05:57 AM

Quote:

Originally Posted by Supreme0verlord

Fck'n A, it unlocks and is stable at stock frequencies/voltages!

http://img.techpowerup.org/100113/X3...ock Stable.png
Now on too OC'ing to see what she can do!

Good job man, crunch hard!

Quote:

Originally Posted by Velvet Wafer

your mosfets probabply heat up, or your PSU. i saw it many times during crunching, when my average temperature was too high. it also could be just the board overvolting during load. pretty normal tho.

overvolting is normal only when a bit, not that much. I'd say leakage, keep the mosfets cooler if possible. Either that or a false reading.

hat · Jan 14, 2010, 02:08 PM

The mosfets should be cooler than they were before. 1.275v is a lot less than 1.325v. When I run it at 1.325v it doesn't jump in coretemp, but when I run it at 1.275v it jumps back up to 1.325v after running OCCT Linpack or LinX. It doesn't do it while running WCG though.

Chicken Patty · Jan 14, 2010, 03:49 PM

Sorry I'm at work an on my phone. Does your board have cooler on MOSFETS?

AlienIsGOD · Jan 14, 2010, 05:54 PM

i got a question. for the WCG button on ur sig where do the points that u need come from as in which site? According to my WCG stats im at 100k points but BOINC STATS and other site show me as 14k. Which is the one u guys go by?

Chicken Patty · Jan 14, 2010, 05:57 PM

DC stats. Once you get to 100K there you are able to add the badge.

hat · Jan 14, 2010, 08:23 PM

Nope, bare mosfets. But it doesn't make sense that it jumps from 1.275v in coretemp to 1.325v, but if I set it to 1.325v that it doesn't budge.

mstenholm · Jan 14, 2010, 08:40 PM

Quote:

Originally Posted by AlienIsGOD

i got a question. for the WCG button on ur sig where do the points that u need come from as in which site? According to my WCG stats im at 100k points but BOINC STATS and other site show me as 14k. Which is the one u guys go by?

There is a factor 7 between these two stats, sadly we have to work hard to get our bagdes

AlienIsGOD · Jan 14, 2010, 10:29 PM

Quote:

Originally Posted by mstenholm

There is a factor 7 between these two stats, sadly we have to work hard to get our bagdes

i understand the hard work i was just confused about the numbers. :O

theonedub · Jan 14, 2010, 10:34 PM

Yeah it confuses a lot of people, so for the badge its 700k WCG points which is equivalent to 100K BOINC.

I say we should have different WCG badges just like the Folding ones

Chicken Patty · Jan 14, 2010, 11:43 PM

Quote:

Originally Posted by hat

Nope, bare mosfets. But it doesn't make sense that it jumps from 1.275v in coretemp to 1.325v, but if I set it to 1.325v that it doesn't budge.

I get what you mean now. Hmmmm, maybe something in your BIOS is causing that?

hat · Jan 15, 2010, 12:26 AM

Doubt it... i dunno why it would..

Chicken Patty · Jan 15, 2010, 12:37 AM

Quote:

Originally Posted by hat

Doubt it... i dunno why it would..

beats me man, could just be a false reading though.

Chicken Patty · Jan 15, 2010, 04:34 AM

Where has ION been?

Jan 13, 2010, 06:36 PM	#6076
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,607 (4.45/day) Thanks: 2,273 Thanked 3,190 Times in 1,925 Posts System Specs	Should be much cooler. My MB did the same thing to my Phenom __________________ My Heatware Feedback 129+ Pristine

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	Asrock Z77E-ITX
Cooling:	Corsair H100 w/ SP120s
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	MSI GTX 580 TFIII LIGHTNING (875c@1.006v)
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	BitFenix Prodigy White
PSU:	Antec TruePower New Blue 750w
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

Jan 13, 2010, 07:14 PM	#6077
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.92/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	That's good HAT. Especially since the rig is running full load all the time, running cooler would really help it out __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Jan 13, 2010, 08:25 PM	#6078
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Well it was already really cool to start with. I lapped the processor and the heatsink and coretemp reported like 27c on linpack (even though there's no actual temp sensor for the core, it defaults to the socket temp). Right now it says 16c and it's been running wcg forever I'm more happy about the power consumption. This board is a 95w max board, so the lower the volts I can run the cpu at the better. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

System Name:	Starlifter // Dragonfly
Processor:	(lapped) i7 920 4GHz 1.3v // 1090T 3.6GHz 1.3v
Motherboard:	Asus Rampage III // Gigabyte GA-770T-USB3
Cooling:	(lapped) Corsair H70 // (lapped) TT Big Typhoon
Memory:	3x2GB DDR3 1600 10-10-10-30-128-1T 1.5v // 2x2GB DDR3 1333 9-9-9-24-1T 1.5v
Video Card:	HIS Radeon 5870 // BFG Maxcore 55 GTX260
Hard Disk:	Plextor M5S 128GB + 512GB OCZ Agility 4 + 2TB WD20EARS // WDC Black 500GB
Optical Drive:	SATA DVD-RW // IDE CD-RW
CRT/LCD Model:	Dell/Alienware AW2310 + 19" HDTV // 19" HDTV
Case:	Antec SOHO 1030B // some really old white case... but it's decent
Sound Card:	Creative X-Fi Fatality Professional // onboard (disabled)
PSU:	Antec NeoHe 550W // Corsair CX600w
Software:	Windows 7 Home Premium x64 // Windows 7 Home Premium x64
Benchmarks:	zunn zunnzunn zunn zunn

Jan 13, 2010, 08:43 PM	#6079
Supreme0verlord Join Date: Dec 2008 Location: Elkhart, IN Posts: 472 (0.29/day) Thanks: 285 Thanked 234 Times in 135 Posts System Specs	My main rig will be down the rest of the day, I just got my replacement CPU for my cruncher and I'm going to be testing it out. I'm hoping that it unlocks and OC's like mine.

System Name:	Optimus
Processor:	Phenom II X3 720 (on four cores) @ 3.52Ghz@1.47v
Motherboard:	Gigabyte GA-MA790GP-UD4H, F7A Bios
Cooling:	Xigmatek HDT-S1284EE
Memory:	4GB (2x2Gb) DDR2 800 5-4-4-12 CR2
Video Card:	EVGA GeForce GTX570 SC @ 840/1680/1950 @1.0v
Hard Disk:	Seagate Barracuda 250Gb
Optical Drive:	LG DVD-Burner
CRT/LCD Model:	Sony Trinitron CPD-G220R 17"
Case:	Cooler Master NV690 (Nvidia Edition)
Sound Card:	Asus Zonar DG + Samson SR850
PSU:	Seasonic X750
Software:	Windows 7 64-Bit Ultimate
Benchmarks:	ಠ_ಠ

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Jan 13, 2010, 11:32 PM	#6081
Supreme0verlord Join Date: Dec 2008 Location: Elkhart, IN Posts: 472 (0.29/day) Thanks: 285 Thanked 234 Times in 135 Posts System Specs	Fck'n A, it unlocks and is stable at stock frequencies/voltages! Now on too OC'ing to see what she can do!

System Name:	Resurrection
Processor:	i7 2600k 4.6ghz
Motherboard:	ASUS Maximus IV Gene-Z Intel Z68
Cooling:	EK Supreme HF, EK Bay Spin Reservoir, Bitspower Compression Fittings, MCP 350, Fesser Tubing
Memory:	8 gig Corsair Dominator GT III 1866 (CAS 9)
Video Card:	asus 580 direct cu II
Hard Disk:	Intel 510 series 120gb
Optical Drive:	Steam FTW!!! who needs Cd's
CRT/LCD Model:	ViewSonic 24 LCD HD VX2439wm
Case:	650D
Sound Card:	on board X-Fi
PSU:	Corsair Memory AX850
Software:	Window 7 x64 Pro
Benchmarks:	X Armor u9bl Mechanical Keyboard "Cherry MX Brown" and SteelSeries Ikari Gaming Mouse

Jan 13, 2010, 11:52 PM	#6084
AlienIsGOD Join Date: Aug 2008 Location: Kingston, Ontario Canada Posts: 2,601 (1.49/day) Thanks: 4,321 Thanked 1,103 Times in 629 Posts System Specs	NOICE!! More crunching powah !!!!!! __________________ Crunching Badges Crunching Hardware CPU: i5 3570K and i5 2400 = 8 cores GPU: 7870 (8 wu's) and 7770 (4 wu's) = 1920 GCN cores (no GPU wu's atm)

System Name:	My Rig (part-time WCG) \| Wife's Rig (full-time WCG) \| L'il Man (kids lappy)
Processor:	Core i5 3570K @ 4.2 ghz 1.20 vcore \| Core i5 2400 \| Turion II P540
Motherboard:	EVGA Z77 FTW 1.21 BIOS \| AsRock Z68M/USB3 2.20 BIOS
Cooling:	CM Hyper 212 EVO R2-push/pull with 2x 120mm PWM \| CM Hyper 101i -push/pull with 2 x 80mm
Memory:	Mushkin Blackline 4GB x 2 1600mhz XMP profile \| Kingston HyperX 4GB x 2 1600mhz XMP profile \| 6GB
Video Card:	Sapphire 7870 2GB OC \| Gigabyte R7770 1GB \| HD4250
Hard Disk:	500GB OS / 500GB Data \| Kingston HyperX 120GB SSD / 2 x Seagate 500GB \| 320GB
Optical Drive:	Asus 22x DVD/CD Combo Drive \| ? \|
CRT/LCD Model:	LG Flatron IPS226 22" IPS 5ms \| Phillips 227E 22" IPS 7ms / 40" Samsung 550 LCD HDTV \| 15.6" LCD
Case:	Antec P280 \| Thermaltake Soprano Snow Edition
Sound Card:	Realtek ALC898 w/ Logitech z623 \| Realtek ALC892 w/ SB X-FI MB2 software w/ Logitech x540
PSU:	Corsair HX1000W \| Thermaltake TR2 500W
Software:	Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit \| Windows 7 Home 64 Bit
Benchmarks:	benchmarks are for noobs, real men crunch WCG for TPU \m/

Jan 14, 2010, 12:22 AM	#6085
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Voltage changes on its own? For some reason, when stability testing (I noticed it while running Linx) my voltage changes on it's own. I have it set to 1.275 in the BIOS, and Coretemp will show it at 1.275v when it first loads up... but after running Linx for a while, it starts reading it as 1.325v... CPU-Z does it as well, it reads 1.280v on startup, but it goes to 1.328v after running Linx for a while. What's up? __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

System Name:	Heatbitch / The Dark Tower / Custom Acer
Processor:	AMD Phenom 2 X4 960T @ 4200mhz 1,44v,3130NB /Q9550 3.4ghz 1.20v/ X2 260 1.42v @3.6
Motherboard:	Asus M4A89GTD PRO / Asus Rampage Formula/Foxconn A7DA-S 3.0
Cooling:	Heatkiller 3.0 LT,Laing DDC+,Octakaideca-Rad /EK SP,Tt 400L, B.Ice XT2/Xiggy Black Knight
Memory:	4x2gb Transcend 2400 CL10 1.65v: 1600 7-8-7-24-40 1.65 /Dominator 1066 2GB/Ripjaws 2000 CL9 4GB
Video Card:	6970, soon to be WCed/ 4870x2 HK Full Cover WC´d / 2xGeforce 8800GT HyperSLI
Hard Disk:	128gb Vertex 3, 32GB Ultradrive GX2, 320GB+500GB+2x1TB F1 /160gb Maxtor,500gb F1/ 160GB WD
Optical Drive:	No Room for these
CRT/LCD Model:	LG Flatron 23" W2353V /Benq 19" FP93E-S/TFT 17"
Case:	Thermaltake Shark /Superflower SF-860B/Acer m-ATX Tower
Sound Card:	Realtek Onboard Sound, on all of them
PSU:	Corsair TX850/ OCZ Modxstream-Pro 600W/ MS-Tech 750w
Software:	XP 32bit Professional+ Win7 64Bit Ultimate
Benchmarks:	3DMark Vantage: P21385 3DM11: P5920

Jan 14, 2010, 12:50 AM	#6087
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Well, I did it again, but this time with 1.325v set in the bios. Coretemp did not move from 1.325v, but Cpuz fluctuated between 1.328v and 1.360v depending on if it was loaded or not. I forgot to mention that even after Linx was long done running, Coretemp and CPU-Z were still showing 1.325v, even though they were showing 1.275v origionally. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Jan 14, 2010, 02:08 PM	#6089
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	The mosfets should be cooler than they were before. 1.275v is a lot less than 1.325v. When I run it at 1.325v it doesn't jump in coretemp, but when I run it at 1.275v it jumps back up to 1.325v after running OCCT Linpack or LinX. It doesn't do it while running WCG though. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Jan 14, 2010, 03:49 PM	#6090
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.92/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	Sorry I'm at work an on my phone. Does your board have cooler on MOSFETS? __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jan 14, 2010, 05:54 PM	#6091
AlienIsGOD Join Date: Aug 2008 Location: Kingston, Ontario Canada Posts: 2,601 (1.49/day) Thanks: 4,321 Thanked 1,103 Times in 629 Posts System Specs	i got a question. for the WCG button on ur sig where do the points that u need come from as in which site? According to my WCG stats im at 100k points but BOINC STATS and other site show me as 14k. Which is the one u guys go by? __________________ Crunching Badges Crunching Hardware CPU: i5 3570K and i5 2400 = 8 cores GPU: 7870 (8 wu's) and 7770 (4 wu's) = 1920 GCN cores (no GPU wu's atm)

Jan 14, 2010, 05:57 PM	#6092
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.92/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	DC stats. Once you get to 100K there you are able to add the badge. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jan 14, 2010, 08:23 PM	#6093
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Nope, bare mosfets. But it doesn't make sense that it jumps from 1.275v in coretemp to 1.325v, but if I set it to 1.325v that it doesn't budge. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Jan 14, 2010, 10:34 PM	#6096
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,607 (4.45/day) Thanks: 2,273 Thanked 3,190 Times in 1,925 Posts System Specs	Yeah it confuses a lot of people, so for the badge its 700k WCG points which is equivalent to 100K BOINC. I say we should have different WCG badges just like the Folding ones __________________ My Heatware Feedback 129+ Pristine

Jan 15, 2010, 12:26 AM	#6098
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Doubt it... i dunno why it would.. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Jan 15, 2010, 04:34 AM	#6100
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.92/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	Where has ION been? __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16542	May 22, 2013 02:25 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM