TPU's WCG/BOINC Team - Page 251

Paulieg · Jan 23, 2010, 05:42 PM

Quote:

Originally Posted by Chicken Patty

I'm going to try and get a new desk soon and place it by my window. I'll then get some of these and route it out my bedroom window. This way the heat goes outside and not in my room. My TT case has a top fan but if that dumps some heat into the room that's ok. If this plan works as planned and the heat is reduced drastically I will add more crunchers and do the same with them of course. What do you think?

I ran something like that for a short time. Are you going to cut the window glass and mount it?

Chicken Patty · Jan 23, 2010, 05:44 PM

Quote:

Originally Posted by Paulieg

I ran something like that for a short time. Are you going to cut the window glass and mount it?

No, I plan on just opening the window enough to fit it and then covering the extra space up with plywood or something. What would you recommend for that?

hat · Jan 23, 2010, 05:51 PM

Don't use plywood. If it rains, the wood may come apart because of the glue.

mstenholm · Jan 23, 2010, 05:55 PM

Move to Denmark. There we crunch and fold to keep us warm in the winter time. Or, if you for some reason decide to stay in Florida I would suggest a acrylic 5-7 mm plate to fill the entire window opening. That is not recommended at ground level, in a bad area, and when you are not home

Paulieg · Jan 23, 2010, 05:58 PM

Quote:

Originally Posted by Chicken Patty

No, I plan on just opening the window enough to fit it and then covering the extra space up with plywood or something. What would you recommend for that?

Fiberglass insulation....really.

Chicken Patty · Jan 23, 2010, 11:37 PM

Quote:

Originally Posted by hat

Don't use plywood. If it rains, the wood may come apart because of the glue.

Good point!

Quote:

Originally Posted by mstenholm

Move to Denmark. There we crunch and fold to keep us warm in the winter time. Or, if you for some reason decide to stay in Florida I would suggest a acrylic 5-7 mm plate to fill the entire window opening. That is not recommended at ground level, in a bad area, and when you are not home

my room is in the 2nd floor, so that wouldn't really be an issue.

Quote:

Originally Posted by Paulieg

Fiberglass insulation....really.

Home depot has that?

[Ion] · Jan 23, 2010, 11:41 PM

Quote:

Originally Posted by Chicken Patty

Good point!

my room is in the 2nd floor, so that wouldn't really be an issue.

Home depot has that?

I'm pretty sure they do, I know Lowes does

Chicken Patty · Jan 23, 2010, 11:42 PM

Quote:

Originally Posted by [Ion]

I'm pretty sure they do, I know Lowes does

I have a new Lowes close to my house, I gotta pass by when I'm ready to do this. Thanks for the suggestion.

HammerON · Jan 23, 2010, 11:43 PM

I was wanting to do the same thing for my crunching rigs, only I would be having the cold air from outside going into the intake fan!

Chicken Patty · Jan 23, 2010, 11:43 PM

Quote:

Originally Posted by HammerON

I was wanting to do the same thing for my crunching rigs, only I would be having the cold air from outside going into the intake fan!

No cold air from outside here

Supreme0verlord · Jan 23, 2010, 11:45 PM

I just happened to look at my runtime today and saw this

I've replaced my 5k BE with my Athlon II X3. It's currently crunching away at 3.3Ghz on 3 cores at stock voltage

. The 4th core is magically unstable for some reason now so I can only use 3

.

HammerON · Jan 23, 2010, 11:48 PM

Quote:

Originally Posted by Chicken Patty

No cold air from outside here

It is a beautiful sunny day in Alaska and it is 18 degrees F (-8 C)

stanhemi · Jan 23, 2010, 11:49 PM

I'm back with all my rigs.I reinstalled my Q9550 in my antec900 what a PITA (i hate this case no room,no cable management) here some pics

this is temporary I need another case

KieX · Jan 23, 2010, 11:55 PM

Quote:

Originally Posted by stanhemi

I'm back with all my rigs.I reinstalled my Q9550 in my antec900 what a PITA (i hate this case no room,no cable management) here some pics

http://img.techpowerup.org/100123/DSCF3010962.jpg
http://img.techpowerup.org/100123/DSCF3014.jpg
this is temporary I need another case

Mind sharing with me the BIOS settings you're using for your Q9550 and P5Q-E? wanna see if there's any scope for improvement with mine

Chicken Patty · Jan 24, 2010, 12:18 AM

Quote:

Originally Posted by Supreme0verlord

I just happened to look at my runtime today and saw this

http://img.techpowerup.org/100123/1337lol.png

I've replaced my 5k BE with my Athlon II X3. It's currently crunching away at 3.3Ghz on 3 cores at stock voltage

. The 4th core is magically unstable for some reason now so I can only use 3

.

Quote:

Originally Posted by HammerON

It is a beautiful sunny day in Alaska and it is 18 degrees F (-8 C)

Quote:

Originally Posted by stanhemi

I'm back with all my rigs.I reinstalled my Q9550 in my antec900 what a PITA (i hate this case no room,no cable management) here some pics

http://img.techpowerup.org/100123/DSCF3010962.jpg
http://img.techpowerup.org/100123/DSCF3014.jpg
this is temporary I need another case

That actually looks rather nice man

What's up with that front fan

stanhemi · Jan 24, 2010, 12:28 AM

Quote:

Originally Posted by Chicken Patty

That actually looks rather nice man

What's up with that front fan

is it really necessary to mention this old fan

p_o_s_pc · Jan 24, 2010, 12:29 AM

good news i got more power for my farm now. I got the other X2 to run again

so what i will have is
i7 920@3.5ghz atleast
X2 5kBE@3ghz
X2 4200+@3ghz
E1500@stock
X4 9500@stock
p4 2.6ghz
p4HT 3ghz

Chicken Patty · Jan 24, 2010, 12:48 AM

Quote:

Originally Posted by stanhemi

is it really necessary to mention this old fan

YES

Quote:

Originally Posted by p_o_s_pc

good news i got more power for my farm now. I got the other X2 to run again

so what i will have is
i7 920@3.5ghz atleast
X2 5kBE@3ghz
X2 4200+@3ghz
E1500@stock
X4 9500@stock
p4 2.6ghz
p4HT 3ghz

I'll be seeing your name on the pie charts soon my friend

p_o_s_pc · Jan 24, 2010, 02:54 AM

i hope bog sends the i7 soon

(FIH) The Don · Jan 24, 2010, 02:55 AM

you can do 3.8 at least if it is C0 rev, and 4.0 min if its D0, even higher

Chicken Patty · Jan 24, 2010, 03:01 AM

My C0 did 4.2GHZ stable at I believe 1.4 v or somethig

(FIH) The Don · Jan 24, 2010, 03:04 AM

they are not bad at all the C0's mine did 4.0 24/7 on a Noctua NH-U12P cooler, but they tend to get a bit hotter than the D0 version, but still a very powerfull cpu.

and got my first wcg points today

nearly 7k, i know its not much but im happy

i can even play while it crunches,

Chicken Patty · Jan 24, 2010, 03:08 AM

Good going bro

theonedub · Jan 24, 2010, 03:14 AM

I was looking around my BIOS and found the Save and Load Profiles option that I thought was missing

, now to experiment on a 200 BCLK. Just have to move some of my excess hardware first

(FIH) The Don · Jan 24, 2010, 03:20 AM

that should not be hard to reach, those new 1156 cpu's are oc'ing monsters

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Jan 23, 2010, 05:51 PM	#6253
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.15/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	Don't use plywood. If it rains, the wood may come apart because of the glue. __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

System Name:	Starlifter // Dragonfly
Processor:	(lapped) i7 920 4GHz 1.3v // 1090T 3.6GHz 1.3v
Motherboard:	Asus Rampage III // Gigabyte GA-770T-USB3
Cooling:	(lapped) Corsair H70 // (lapped) TT Big Typhoon
Memory:	3x2GB DDR3 1600 10-10-10-30-128-1T 1.5v // 2x2GB DDR3 1333 9-9-9-24-1T 1.5v
Video Card:	HIS Radeon 5870 // BFG Maxcore 55 GTX260
Hard Disk:	Plextor M5S 128GB + 512GB OCZ Agility 4 + 2TB WD20EARS // WDC Black 500GB
Optical Drive:	SATA DVD-RW // IDE CD-RW
CRT/LCD Model:	Dell/Alienware AW2310 + 19" HDTV // 19" HDTV
Case:	Antec SOHO 1030B // some really old white case... but it's decent
Sound Card:	Creative X-Fi Fatality Professional // onboard (disabled)
PSU:	Antec NeoHe 550W // Corsair CX600w
Software:	Windows 7 Home Premium x64 // Windows 7 Home Premium x64
Benchmarks:	zunn zunnzunn zunn zunn

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Jan 23, 2010, 05:55 PM	#6254
mstenholm Join Date: Nov 2009 Location: Denmark Posts: 1,772 (1.37/day) Thanks: 1,009 Thanked 1,048 Times in 644 Posts System Specs	Move to Denmark. There we crunch and fold to keep us warm in the winter time. Or, if you for some reason decide to stay in Florida I would suggest a acrylic 5-7 mm plate to fill the entire window opening. That is not recommended at ground level, in a bad area, and when you are not home

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Jan 23, 2010, 11:43 PM	#6259
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,371 (2.83/day) Thanks: 3,987 Thanked 2,883 Times in 1,546 Posts System Specs	I was wanting to do the same thing for my crunching rigs, only I would be having the cold air from outside going into the intake fan!

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Jan 23, 2010, 11:45 PM	#6261
Supreme0verlord Join Date: Dec 2008 Location: Elkhart, IN Posts: 472 (0.29/day) Thanks: 285 Thanked 234 Times in 135 Posts System Specs	I just happened to look at my runtime today and saw this I've replaced my 5k BE with my Athlon II X3. It's currently crunching away at 3.3Ghz on 3 cores at stock voltage . The 4th core is magically unstable for some reason now so I can only use 3 .

System Name:	Optimus
Processor:	Phenom II X3 720 (on four cores) @ 3.52Ghz@1.47v
Motherboard:	Gigabyte GA-MA790GP-UD4H, F7A Bios
Cooling:	Xigmatek HDT-S1284EE
Memory:	4GB (2x2Gb) DDR2 800 5-4-4-12 CR2
Video Card:	EVGA GeForce GTX570 SC @ 840/1680/1950 @1.0v
Hard Disk:	Seagate Barracuda 250Gb
Optical Drive:	LG DVD-Burner
CRT/LCD Model:	Sony Trinitron CPD-G220R 17"
Case:	Cooler Master NV690 (Nvidia Edition)
Sound Card:	Asus Zonar DG + Samson SR850
PSU:	Seasonic X750
Software:	Windows 7 64-Bit Ultimate
Benchmarks:	ಠ_ಠ

Jan 23, 2010, 11:49 PM	#6263
stanhemi Join Date: Sep 2008 Location: Montreal,-Canada. Posts: 789 (0.46/day) Thanks: 628 Thanked 355 Times in 217 Posts System Specs	I'm back with all my rigs.I reinstalled my Q9550 in my antec900 what a PITA (i hate this case no room,no cable management) here some pics this is temporary I need another case __________________ ''I always wanted to be somebody, but now I realize I should have been more specific.'' RIG2 Q6600@3010mhz-Xiggy s1283-2g corsair xms 800-x1950 pro-enermax 485 watt-P5QPL-AM RIG3 P4 531@3600mhz-P5ld2-vm-1g ddr2 533 Rig4 AMD??-Asus M4A785TD-V-2x1g kingston ddr3 1333mhz-psu??? http://stats.free-dc.org/projusertag...94936&theme=14

System Name:	CRUNSHING MINI FARM
Processor:	Q9550 C1(lapped)@4105mhz 1,38vcore/Q6600 G0 @3010mhz 1,24vcore
Motherboard:	P5Q-E 8.5 x 483 fsb/P5QPL-AM 9x334fsb
Cooling:	watercooled storm,mcw60,2x240mm,micro res rev2,laing ddc3.2/Xig s1283(lapped)
Memory:	CORSAIR DOMINATOR 2X2G 1066MHZ@965-mhz 5-4-5-15/kingston kvr800mhz 2x1g
Video Card:	SAPPHIRRE 4870 1G @850/1020/ati x1950 pro
Hard Disk:	RAID0 2X RAPTOR 74gb/wd 250g
Optical Drive:	PIONNER DVD/lg dvd
CRT/LCD Model:	22'' LCD 1680x1050/lg 17" 1280x1024
Case:	Antec 900 white inside/crappy white case
Sound Card:	onboard/onboard
PSU:	ocz 700 watt mod xstream pro/enermax noiseblocker 485 watt
Software:	Windows 7 x64/vista 32
Benchmarks:	3dmark06 18950

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

Jan 24, 2010, 12:29 AM	#6267
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	good news i got more power for my farm now. I got the other X2 to run again so what i will have is i7 920@3.5ghz atleast X2 5kBE@3ghz X2 4200+@3ghz E1500@stock X4 9500@stock p4 2.6ghz p4HT 3ghz __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Jan 24, 2010, 02:54 AM	#6269
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	i hope bog sends the i7 soon __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

Jan 24, 2010, 02:55 AM	#6270
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	you can do 3.8 at least if it is C0 rev, and 4.0 min if its D0, even higher __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

Jan 24, 2010, 03:01 AM	#6271
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	My C0 did 4.2GHZ stable at I believe 1.4 v or somethig __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jan 24, 2010, 03:04 AM	#6272
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	they are not bad at all the C0's mine did 4.0 24/7 on a Noctua NH-U12P cooler, but they tend to get a bit hotter than the D0 version, but still a very powerfull cpu. and got my first wcg points today nearly 7k, i know its not much but im happy i can even play while it crunches, __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Jan 24, 2010, 03:08 AM	#6273
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	Good going bro __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jan 24, 2010, 03:14 AM	#6274
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,621 (4.45/day) Thanks: 2,277 Thanked 3,198 Times in 1,927 Posts System Specs	I was looking around my BIOS and found the Save and Load Profiles option that I thought was missing , now to experiment on a 200 BCLK. Just have to move some of my excess hardware first __________________ My Heatware Feedback 129+ Pristine

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	AsRock Z77 Extreme 4 M
Cooling:	NZXT Kraken x60
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	EVGA NVIDIA GTX 780 3GB
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	Corsair Obsidian 350D
PSU:	Seasonic X750
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

Jan 24, 2010, 03:20 AM	#6275
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.91/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	that should not be hard to reach, those new 1156 cpu's are oc'ing monsters __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16542	May 22, 2013 02:25 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM