Sexy Hardware Close-Up Pic Clubhouse. - Page 50

HammerON · Feb 21, 2010, 01:09 AM

Quote:

Originally Posted by aCid888*

More pictures needed when you install it.

Alright ~ I waited until I had time to completely clean my case as the rig has been crunching non-stop for about 2.5 months. Was really coated with dust

Yeah ~ I know that is pretty bad. I just got caught-up messing around with my two other i7 rigs, and my recently sold Xeon 3220 rig. No excuse though..

Anyways, the rad cleaned-up nicely as well as the six fans (just not in this pic):

Sorry about the flash

I hate this shot because I need an extension for my 8-pin. Won't even fit behind the little GPU

Chicken Patty · Feb 21, 2010, 01:12 AM

damn dude, I've been through that before. As a matter of fact that's how my H50 looks right now. Going to clean it out tomorrow.

HammerON · Feb 21, 2010, 01:14 AM

Yeah I spent about 5 hours cleaning every little part (including 9 120mm fans and the big fan up top even though it wasn't too dusty). Way out of control

Chicken Patty · Feb 21, 2010, 01:16 AM

Quote:

Originally Posted by HammerON

Yeah I spent about 5 hours cleaning every little part (including 9 120mm fans and the big fan up top even though it wasn't too dusty). Way out of control

The last time I did it I did it with an air compressor, took about 10 minutes

Nothing will survive it

copenhagen69 · Feb 21, 2010, 01:20 AM

Quote:

Originally Posted by HammerON

Yeah I spent about 5 hours cleaning every little part (including 9 120mm fans and the big fan up top even though it wasn't too dusty). Way out of control

Quote:

Originally Posted by Chicken Patty

The last time I did it I did it with an air compressor, took about 10 minutes

Nothing will survive it

hmmm air compressor will take almost all the dust off?
will it take some of the nasty caked on dust off too?

Chicken Patty · Feb 21, 2010, 01:22 AM

Quote:

Originally Posted by copenhagen69

hmmm air compressor will take almost all the dust off?
will it take some of the nasty caked on dust off too?

Yeah, it's powerful man. Nothing is left.

HammerON · Feb 21, 2010, 01:24 AM

The shitty thing is that I was all excited to try out the Koolance CPU-360. So I took off the Apogee GTZ SE (and stripped one of the threads again) and put the Koolance 360 on. Got it all back together and fired her up and...
Something is incredibly wrong:

At stock w/out running WCG

At stock trying to run WCG

Temps were headed towards 100 before I shut WCG down.

WTF

aCid888* · Feb 21, 2010, 01:25 AM

I cant understand how a rad can get that way so fast.....I haven't cleaned mine in 7~ months and I have barely any dust buildup and thats without any filters.

A full loop clean/component clean is on the cards for me too soon.

Either way, that Koolance block looks the shit.

Chicken Patty · Feb 21, 2010, 01:25 AM

Quote:

Originally Posted by HammerON

The shitty thing is that I was all excited to try out the Koolance CPU-360. So I took off the Apogee GTZ SE (and stripped one of the threads again) and put the Koolance 360 on. Got it all back together and fired her up and...
Something is incredibly wrong:

At stock w/out running WCG
http://img.techpowerup.org/100220/Capture003.jpg

At stock trying to run WCG
http://img.techpowerup.org/100220/Capture004323.jpg
Temps were headed towards 100 before I shut WCG down.

WTF

The stripped thread was on the apogee block right?

You sure you have the block mounted correctly? Maybe you forgot a little something somewhere. Bubble in the loops? Shake the s**t out of the rad and see. TIM applied correctly?

copenhagen69 · Feb 21, 2010, 01:27 AM

Quote:

Originally Posted by Chicken Patty

Yeah, it's powerful man. Nothing is left.

sweet ... gonna have to go hook up my compressor and go to town then

Chicken Patty · Feb 21, 2010, 01:29 AM

Quote:

Originally Posted by copenhagen69

sweet ... gonna have to go hook up my compressor and go to town then

yeah man, I used to dust my whole case like that, 125PSI

HammerON · Feb 21, 2010, 01:37 AM

Quote:

Originally Posted by Chicken Patty

The stripped thread was on the apogee block right?

You sure you have the block mounted correctly? Maybe you forgot a little something somewhere. Bubble in the loops? Shake the s**t out of the rad and see. TIM applied correctly?

Yeah the stripped thread is on the base plate for the Apogee (god that system sucks balls). It would be very difficult to strip the Koolance ones as they are heavy duty

Yep block is mounted nicely with the "in" and "out" hooked-up correctly. No bubbles and she is moving the water through nicely. Used Arctic Silver 5 as always.
Tried tightening the block as well as backing off a bit ~ no change.
I am now taking her back apart and starting over again. I will see how the TIM looks on the block after being in contact with the cpu (curious).

I am also going to rotate the block to see if that helps. I am using BP 1/2" barbs on the wb, don't think that has anything to do with it but it might. You wouldn't think that high water flow would be a bad thing...

Chicken Patty · Feb 21, 2010, 01:54 AM

Quote:

Originally Posted by HammerON

Yeah the stripped thread is on the base plate for the Apogee (god that system sucks balls). It would be very difficult to strip the Koolance ones as they are heavy duty

Yep block is mounted nicely with the "in" and "out" hooked-up correctly. No bubbles and she is moving the water through nicely. Used Arctic Silver 5 as always.
Tried tightening the block as well as backing off a bit ~ no change.
I am now taking her back apart and starting over again. I will see how the TIM looks on the block after being in contact with the cpu (curious).

I am also going to rotate the block to see if that helps. I am using BP 1/2" barbs on the wb, don't think that has anything to do with it but it might. You wouldn't think that high water flow would be a bad thing...

naw, I think you just might have forgot something on the install. Maybe backplate is not mounted correctly causing block to tighten down more on one side or something.

zithe · Feb 21, 2010, 01:59 AM

HammerOn, you can tuck that 8-Pin CPU cable under the mobo between mounts and pop it out the other side. There's enough space, though you'll have to remove the board.

Wile E · Feb 21, 2010, 02:06 AM

Quote:

Originally Posted by Chicken Patty

naw, I think you just might have forgot something on the install. Maybe backplate is not mounted correctly causing block to tighten down more on one side or something.

I hope so. I just ordered my CPU-360 last night. lol. I eas tossing up between the HK and the 360. Picked the 360 because of it's more universal nature. Hope it performs close.

Chicken Patty · Feb 21, 2010, 02:09 AM

Quote:

Originally Posted by Wile E

I hope so. I just ordered my CPU-360 last night. lol. I eas tossing up between the HK and the 360. Picked the 360 because of it's more universal nature. Hope it performs close.

Tons of people have gotten great results. Unless his is defective or he mounted it wrong, I don't see how it can perform that bad.

HammerON · Feb 21, 2010, 02:43 AM

Quote:

Originally Posted by zithe

HammerOn, you can tuck that 8-Pin CPU cable under the mobo between mounts and pop it out the other side. There's enough space, though you'll have to remove the board.

Danm cable is too short for even that to work (tried). Thanks though

Quote:

Originally Posted by Chicken Patty

naw, I think you just might have forgot something on the install. Maybe backplate is not mounted correctly causing block to tighten down more on one side or something.

Okay disassembled and backplate looked good. There is a bar on the back for the NB but I don't think it is interfering with anything:

I noticed that the WB had crappy contact with the CPU:

I cleaned the wb and rotated and then I noticed this:

And that was the part of the wb that wasn't touching the CPU!!!

So I am thinking of putting the Noctua NH-D14 on this board and trying the wb on my EVGA X58 mb. Man this sucks though! I am going to send pics to Koolance as their site states (visual only):

HammerON · Feb 21, 2010, 02:46 AM

I forgot to show some hardware pics that I took of my little X1650:

And Rad:

Chicken Patty · Feb 21, 2010, 02:57 AM

Quote:

Originally Posted by HammerON

Danm cable is too short for even that to work (tried). Thanks though

Okay disassembled and backplate looked good. There is a bar on the back for the NB but I don't think it is interfering with anything:
http://img.techpowerup.org/100220/IMG_0020810.jpg

I noticed that the WB had crappy contact with the CPU:
http://img.techpowerup.org/100220/IMG_0016.jpg

I cleaned the wb and rotated and then I noticed this:
http://img.techpowerup.org/100220/IMG_0025491.jpg
And that was the part of the wb that wasn't touching the CPU!!!
http://img.techpowerup.org/100220/IMG_0026.jpg

So I am thinking of putting the Noctua NH-D14 on this board and trying the wb on my EVGA X58 mb. Man this sucks though! I am going to send pics to Koolance as their site states (visual only):
http://img.techpowerup.org/100220/Capture001175.jpg

That's a very good observation. So it says it's compatible with your board, yet it ain't.

@ Koolance.

AthlonX2 · Feb 23, 2010, 04:57 AM

my first closeup pics

HammerON · Feb 23, 2010, 05:56 AM

Nice pics AthlonX2

And here are some pics of my new Titan FENRIR thanks to AthlonX2:

(FIH) The Don · Feb 23, 2010, 06:51 AM

that cooler looks nice man, how does it perform?

got my memory today, now i just need the board and the cpu, should recieve the SLI LE within a few days and the cpu next week

pantherx12 · Feb 23, 2010, 09:25 AM

Quote:

Originally Posted by HammerON

Nice pics AthlonX2

And here are some pics of my new Titan FENRIR thanks to AthlonX2:

http://img.techpowerup.org/100223/IMG_0002.jpg
http://img.techpowerup.org/100223/IMG_0004.jpg
http://img.techpowerup.org/100223/IMG_0007.jpg
http://img.techpowerup.org/100223/IMG_0010.jpg

Awesome you got the Christmas edition

( no really, its what its same is on titans website!

) looks awesome and very Christmas-y mind you

Not sure if I've posted this one up before
Asus Xonar DX, no longer have this got it from MK but had to sell it due to poor.

KieX · Feb 23, 2010, 12:05 PM

Quote:

Originally Posted by HammerON

Nice pics AthlonX2

And here are some pics of my new Titan FENRIR thanks to AthlonX2:

http://img.techpowerup.org/100223/IMG_0002.jpg
http://img.techpowerup.org/100223/IMG_0004.jpg
http://img.techpowerup.org/100223/IMG_0007.jpg
http://img.techpowerup.org/100223/IMG_0010.jpg

That's just crazy nice! Your pics are much better than the product pics BTW.

pantherx12 · Feb 23, 2010, 11:22 PM

More pics I found on my photo bucket

( by the way, anyone got the nut that is infront of the cooler spare? I'm missing one)

Over exposed but my old 3870/3850 crossfire set up

Another picture of the CPU cooler I bought the other week

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Feb 21, 2010, 01:12 AM	#1227
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.93/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	damn dude, I've been through that before. As a matter of fact that's how my H50 looks right now. Going to clean it out tomorrow. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

Feb 21, 2010, 01:14 AM	#1228
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,348 (2.82/day) Thanks: 3,977 Thanked 2,875 Times in 1,541 Posts System Specs	Yeah I spent about 5 hours cleaning every little part (including 9 120mm fans and the big fan up top even though it wasn't too dusty). Way out of control

Processor:	I7 920 @ 4.1
Motherboard:	ASUS Rampage III Extreme
Cooling:	Custom water cooling
Memory:	3x2GB Mushkin
Video Card:	580
Hard Disk:	320GB
CRT/LCD Model:	BenQ V2400W
Case:	Custom
Sound Card:	on board
PSU:	Antec TPQ 1200w

Feb 21, 2010, 01:24 AM	#1232
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,348 (2.82/day) Thanks: 3,977 Thanked 2,875 Times in 1,541 Posts System Specs	The shitty thing is that I was all excited to try out the Koolance CPU-360. So I took off the Apogee GTZ SE (and stripped one of the threads again) and put the Koolance 360 on. Got it all back together and fired her up and... Something is incredibly wrong: At stock w/out running WCG At stock trying to run WCG Temps were headed towards 100 before I shut WCG down. WTF

Feb 21, 2010, 01:25 AM	#1233
aCid888* Join Date: May 2008 Location: In a state of flux... Posts: 2,297 (1.26/day) Thanks: 360 Thanked 660 Times in 547 Posts	I cant understand how a rad can get that way so fast.....I haven't cleaned mine in 7~ months and I have barely any dust buildup and thats without any filters. A full loop clean/component clean is on the cards for me too soon. Either way, that Koolance block looks the shit. __________________ HTPC: E8500 @ 3.8GHz 1.20v ~ Passive Xiggy HDT-1283 ~ X38 Maximus Formula (Rampage BIOS) ~ 2x1GB Mushkin 1150mhz @ 950mhz 2.0v ~ 2x500GB RAID0 ~ eVGA 9800GTX+ SC ~ 52" Toshiba 1920x1080 LCD ~ Windows XP SP3 ~ Logitech Z-5500 5.1 “I would like to thank acid for this pivotal moment in internet history were he has just successfully forced the creation of a brand new meme.” -Solaris17

System Name:	His (aCid888*) ..:\|:.. Hers (p1nky)
Processor:	Q9550 @ 4.25GHz (1.29v) - Lapped Koolance CPU-345 ..:\|:.. 945ES @ 3.82GHz (1.47v) - Lapped Fuzion v1
Motherboard:	Gigabyte EP-45 UD3P (MX-2 NB + SB) ..:\|:.. Asus M3A79-T Deluxe 790FX (MX-2 NB + SB)
Cooling:	MCP-355/XSPC 200ml Restop + Feser X-Changer 360 ..:\|:.. MCP-355/XSPC 200ml + Black Ice Extreme 360
Memory:	2x2GB OCZ Flex II 1150mhz @ 1200mhz 5-5-5-15 ..:\|:.. 2x2GB G.Skill Pi Black @ 864MHz 4-4-4-12
Video Card:	PNY "XLR8" 9800GX2 ..:\|:.. HIS 4870 1GB @ 800/1000 (Stock Air For Now)
Hard Disk:	Western Digital "AAKS" 640GB + XP SP3 ..:\|:.. Seagate 500GB + XP SP3
Optical Drive:	Black LightScibe LG ..:\|:.. Black LightScribe LG
CRT/LCD Model:	22" BenQ E2200HD @ 1920x1080 ..:\|:.. 22" Acer P223w @ 1680x1050
Case:	Modded Lian Li PC-7FW ..:\|:.. Modded Lian Li PC-6F
Sound Card:	SoundBlaster Audigy 2 ZS (Heatsink Mod) ..:\|:.. SoundBlaster Audigy 2 (Heatsink Mod)
PSU:	Zalman ZM750-HP 750w Modular ..:\|:.. OCZ ModXStream-Pro 600w Modular
Software:	A Lot?
Benchmarks:	Many?

Feb 21, 2010, 01:59 AM	#1239
zithe Join Date: Jun 2008 Location: North Chili, NY Posts: 2,646 (1.47/day) Thanks: 220 Thanked 350 Times in 310 Posts System Specs	HammerOn, you can tuck that 8-Pin CPU cable under the mobo between mounts and pop it out the other side. There's enough space, though you'll have to remove the board. __________________ “Fudzilla Confirms its fake!!! ]” -SammyHayabuza

System Name:	Woot!:D
Processor:	Phenom II 965
Motherboard:	DFI LP DK 790FX-M2RS
Cooling:	CoolerMaster V8
Memory:	8GB DDR2 800
Video Card:	2x Radeon 5850 1GB Crossfire
CRT/LCD Model:	LG 23" 1920x1080
Case:	Thermaltake v6
Sound Card:	SIIG IC-710012-S2 7.1 24-bit 96KHz PCI
PSU:	Corsair TX600W
Software:	Windows 7 Home Premium 64 bit

System Name:	The ClusterF**k
Processor:	980X @ 4212Mhz 24/7
Motherboard:	Gigabyte GA-EX58-UD5 BIOS F12
Cooling:	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory:	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24
Video Card:	Evga GTX 580
Hard Disk:	Seagate 7200.10 320GB x2 RAID0; 2 x Samsung F2 1.5TB; 1 x F1 1TB; 1 x F4 2TB
Optical Drive:	LG WH10LS30K 10X Blu-ray Burner
CRT/LCD Model:	HP LP2475w 24" 1920x1200 IPS
Case:	Technofront Bench Station
Sound Card:	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
PSU:	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software:	Win7 Ultimate N x64

Feb 21, 2010, 02:46 AM	#1243
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,348 (2.82/day) Thanks: 3,977 Thanked 2,875 Times in 1,541 Posts System Specs	I forgot to show some hardware pics that I took of my little X1650: And Rad:

Feb 23, 2010, 04:57 AM	#1245
AthlonX2 Better Than You Join Date: Sep 2006 Location: Toledo,Ohio Posts: 5,449 (2.24/day) Thanks: 729 Thanked 1,572 Times in 994 Posts System Specs	my first closeup pics

Feb 23, 2010, 05:56 AM	#1246
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,348 (2.82/day) Thanks: 3,977 Thanked 2,875 Times in 1,541 Posts System Specs	Nice pics AthlonX2 And here are some pics of my new Titan FENRIR thanks to AthlonX2:

Feb 23, 2010, 06:51 AM	#1247
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	that cooler looks nice man, how does it perform? got my memory today, now i just need the board and the cpu, should recieve the SLI LE within a few days and the cpu next week __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78 Last edited by (FIH) The Don; Feb 23, 2010 at 07:10 AM.

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

System Name:	Panther's PC
Processor:	FX8120 4.5 ghz + 0.125 volts over stock
Motherboard:	Gigabyte 990fxa ud3
Cooling:	Ek Supreme, Coolingking Tripple Thick Copper Radiator
Memory:	Hyperx 4x2gb 1600mhz
Video Card:	460 768mb : [
Hard Disk:	WD blue 500gb
CRT/LCD Model:	AOC HD
Case:	Mountain Mods U2-UFO
Sound Card:	Audigy z2
PSU:	Powercool 750w modular PSU ( GAMBLING YAY!)
Software:	Windows SEVEN
Benchmarks:	Pffft benchmarking for me is for the lulz only!

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

Feb 23, 2010, 11:22 PM	#1250
pantherx12 Eligible for custom title Join Date: Jan 2009 Location: ENGLAND-LAND-LAND Posts: 8,443 (5.28/day) Thanks: 1,188 Thanked 1,705 Times in 1,375 Posts System Specs	More pics I found on my photo bucket ( by the way, anyone got the nut that is infront of the cooler spare? I'm missing one) Over exposed but my old 3870/3850 crossfire set up Another picture of the CPU cooler I bought the other week __________________ http://www.heatware.com/eval.php?id=68840

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
X-Fi Support Syndicate & Owner's Clubhouse	imperialreign	techPowerUp! Club Forum	1493	Jan 14, 2012 03:51 AM
512MB Club 3D Radeon X1900XTX £105.75 inc VAT	jocksteeluk	Hot Deals	6	Feb 6, 2008 02:30 PM
ASUS Provides Hardware Accelerated Audio For Windows Vista	Jimmy 2004	News	4	Jan 26, 2008 09:34 AM
AMD Receives Scathing Editorial From Hardware Review Site Tech Report	zekrahminator	News	39	Nov 28, 2007 05:41 PM
Vista Requires More Hardware Resources than Microsoft's Windows for Supercomputers	Ben Clarke	General Software	3	Nov 26, 2007 05:29 AM