Got my new PC but it wont turn on...

-1nf1n1ty- · Apr 24, 2010, 09:34 PM

I mean it turns on but It will run for a good 4 seconds then turn off(havent even been able to get to bios or anything) please help

system specs:

CPU: i7 920
RAm: 6g patriot ram
motherboard: Asus P6T
Video:ATI 5870
PSU: 650 Corsair

theonedub · Apr 24, 2010, 09:35 PM

Clear the CMOS and try again.

-1nf1n1ty- · Apr 24, 2010, 09:36 PM

Quote:

Originally Posted by theonedub

Clear the CMOS and try again.

how?

HammerON · Apr 24, 2010, 09:38 PM

I think on the back of the board (I/O area), there is a CMOS button. Check there.

If that doesn't work, try one stick of ram and see if it will boot. If it doesn't, try a different stick (so on and so on)...

LAN_deRf_HA · Apr 24, 2010, 09:42 PM

You did remember to use standoffs right?

-1nf1n1ty- · Apr 24, 2010, 09:44 PM

Quote:

Originally Posted by LAN_deRf_HA

You did remember to use standoffs right?

what now?

-1nf1n1ty- · Apr 24, 2010, 09:45 PM

Quote:

Originally Posted by HammerON

I think on the back of the board (I/O area), there is a CMOS button. Check there.

If that doesn't work, try one stick of ram and see if it will boot. If it doesn't, try a different stick (so on and so on)...

also there isnt a cmos button

theonedub · Apr 24, 2010, 09:47 PM

then there is probably a jumper on the board to do it. Read the manual and find out.

Black Panther · Apr 24, 2010, 09:54 PM

Quote:

Originally Posted by -1nf1n1ty-

also there isnt a cmos button

Unpower the wall-plug or psu switch. Take the side-panel off. Remove the cmos (round shiny) battery for 15-30 seconds. Put it back in.
Check...

Hockster · Apr 24, 2010, 09:55 PM

HSF plugged into the CPU fan header?
4/8 pin CPU aux power connected?

-1nf1n1ty- · Apr 24, 2010, 09:59 PM

I did what the manual said and when I moved the cap over it doesnt even start up(lights are on,no fans are on ) jsut wont even let me get to bios

-1nf1n1ty- · Apr 24, 2010, 10:00 PM

Quote:

Originally Posted by Hockster

HSF plugged into the CPU fan header?
4/8 pin CPU aux power connected?

HSF?

the 4/8 pins are in

Hockster · Apr 24, 2010, 10:01 PM

Heat Sink Fan.

-1nf1n1ty- · Apr 24, 2010, 10:02 PM

Quote:

Originally Posted by Hockster

Heat Sink Fan.

its plugged in

Fourstaff · Apr 24, 2010, 10:05 PM

Quote:

Originally Posted by -1nf1n1ty-

its plugged in

Plugged and spinning?

LAN_deRf_HA · Apr 24, 2010, 10:05 PM

Standoffs keep the board from touching the back of the case and shorting out. I'm ashamed to say I built a system a number of years ago without them because all my previous cases had them built in so I had never needed them... but the fact that yours comes on for 4 full seconds makes me think it isn't a short, shorting systems usually only flash on for less than a second.

-1nf1n1ty- · Apr 24, 2010, 10:08 PM

Quote:

Originally Posted by Fourstaff

Plugged and spinning?

Yeah its spinning

Quote:

Originally Posted by LAN_deRf_HA

Standoffs keep the board from touching the back of the case and shorting out. I'm ashamed to say I built a system a number of years ago without them because all my previous cases had them built in so I had never needed them... but the fact that yours comes on for 4 full seconds makes me think it isn't a short, shorting systems usually only flash on for less than a second.

I just screwed the motherboard down into the haf backing, did I need to add standoffs( the gold things screws, at least thats what Im thinking it is)

Black Panther · Apr 24, 2010, 10:12 PM

Quote:

Originally Posted by -1nf1n1ty-

Yeah its spinning

did I need to add standoffs( the gold things screws, at least thats what Im thinking it is)

They're the screws the motherboard holes go into. Yes you would need to use them...

-1nf1n1ty- · Apr 24, 2010, 10:13 PM

Quote:

Originally Posted by Black Panther

They're the screws the motherboard holes go into. Yes you would need to use them...

I usually dont and the computer still works

HammerON · Apr 24, 2010, 10:14 PM

Quote:

Originally Posted by -1nf1n1ty-

also there isnt a cmos button

Yeah - my bad I was thinking of a different board. I have the ASUS P6T and just looked

You should be using the stand-off screws~

Out of the manual for clearing CMOS:

-1nf1n1ty- · Apr 24, 2010, 10:28 PM

omg I feel retarded as shit! fuckignhell, sorry for the stupid questions, but YES I got my pc running cause I needed standoffs thanks everyone for the help

HammerOn: yeah Im about to do that right now thank you

LAN_deRf_HA · Apr 24, 2010, 10:31 PM

I almost didn't mention it cause I thought "nobody could be as dense as me"... glad I wasn't the only one to do that

HammerON · Apr 24, 2010, 10:32 PM

Glad you got her figured out man! I know how much it can suck when you get a rig together and then the danm thing won't work!!!

-1nf1n1ty- · Apr 24, 2010, 10:33 PM

Quote:

Originally Posted by HammerON

Glad you got her figured out man! I know how much it can suck when you get a rig together and then the danm thing won't work!!!

Yeah it wasnt the cpu I wanted but, 930 and 920's are practically the same I've done some reviews and saw that it only made 2-3 fps difference

-1nf1n1ty- · Apr 24, 2010, 10:40 PM

Alright problem number 2:

I did the jumper thing, and placed it back but I still cant see the bios

Apr 24, 2010, 09:34 PM	#1
-1nf1n1ty- Join Date: Nov 2006 Location: Winter Park Posts: 1,562 (0.65/day) Thanks: 247 Thanked 134 Times in 125 Posts System Specs	Got my new PC but it wont turn on... I mean it turns on but It will run for a good 4 seconds then turn off(havent even been able to get to bios or anything) please help system specs: CPU: i7 920 RAm: 6g patriot ram motherboard: Asus P6T Video:ATI 5870 PSU: 650 Corsair

System Name:	mult1kill
Processor:	I7 920/Intel Core 2 Quad Q6600@3ghz, xigmatek dark knight cpu cooler
Motherboard:	Asus P6T/DFI LANPARTY DK X48-T2RS LGA 775 Intel X48 ATX Intel Motherboard
Cooling:	Not sure came with the case/Fans with LED's air cooling
Memory:	Patriot DDR3 6gb/6GB 2Corsair 1GB , 2OCZ 2GB
Video Card:	ATI Diamond 5870/BFG 8800GTS OC 640mb
Hard Disk:	Seagate 500gb/300GB Western Digital
Optical Drive:	MSI DVD RW/Sony DVD+R
CRT/LCD Model:	Samsung SyncMaster 220WM
Case:	Cooler Master HAF/Ultra Aluminus
Sound Card:	Astro Mixamp/Audio-TechnicaAD700
PSU:	Corsair 650
Software:	Windows 7 Ultimate

Apr 24, 2010, 09:35 PM	#2
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,668 (4.42/day) Thanks: 2,319 Thanked 3,219 Times in 1,937 Posts System Specs	Clear the CMOS and try again. __________________ My Heatware Feedback 129+ Pristine

System Name:	WCG0
Processor:	i7 3770k @ 4.2ghz 1.080v
Motherboard:	AsRock Z77 Extreme 4 M
Cooling:	NZXT Kraken X60
Memory:	16GB Corsair Vengeance DDR3 1600
Video Card:	EVGA NVIDIA GTX 780 3GB
Hard Disk:	256gb Corsair Performance Pro, 2TB Caviar Green, 2TB Samsung F4
CRT/LCD Model:	DELL Ultrasharp U2713HM 27"
Case:	Corsair Obsidian 350D
PSU:	Seasonic X750
Software:	Windows 7 Pro x64
Benchmarks:	WCG & F@H

System Name:	mult1kill
Processor:	I7 920/Intel Core 2 Quad Q6600@3ghz, xigmatek dark knight cpu cooler
Motherboard:	Asus P6T/DFI LANPARTY DK X48-T2RS LGA 775 Intel X48 ATX Intel Motherboard
Cooling:	Not sure came with the case/Fans with LED's air cooling
Memory:	Patriot DDR3 6gb/6GB 2Corsair 1GB , 2OCZ 2GB
Video Card:	ATI Diamond 5870/BFG 8800GTS OC 640mb
Hard Disk:	Seagate 500gb/300GB Western Digital
Optical Drive:	MSI DVD RW/Sony DVD+R
CRT/LCD Model:	Samsung SyncMaster 220WM
Case:	Cooler Master HAF/Ultra Aluminus
Sound Card:	Astro Mixamp/Audio-TechnicaAD700
PSU:	Corsair 650
Software:	Windows 7 Ultimate

Apr 24, 2010, 09:38 PM	#4
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,463 (2.84/day) Thanks: 4,057 Thanked 2,996 Times in 1,576 Posts System Specs	I think on the back of the board (I/O area), there is a CMOS button. Check there. If that doesn't work, try one stick of ram and see if it will boot. If it doesn't, try a different stick (so on and so on)...

System Name:	Haswell
Processor:	i7 4770K
Motherboard:	MSI Z87-GD65
Cooling:	H2O
Memory:	G.SKILL Trident X 16GB DDR3 2666
Video Card:	2x MSI GTX 780
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

Apr 24, 2010, 09:42 PM	#5
LAN_deRf_HA Join Date: Apr 2008 Posts: 4,067 (2.14/day) Thanks: 295 Thanked 851 Times in 594 Posts System Specs	You did remember to use standoffs right?

System Name:	Obelisc
Processor:	i7 3770k @ 4.8 GHz
Motherboard:	Asus P8Z77-V
Cooling:	H110
Memory:	16GB(4x8) @ 2200 MHz 9-11-10-28 2T
Video Card:	Galaxy GTX 660 Ti GC 3GB SLI
Hard Disk:	M4 256GB, 2x 3TB Seagate XT
Optical Drive:	Samsung 12x Bluray
CRT/LCD Model:	Crossover 27Q
Case:	Corsair 550D
Sound Card:	X-Fi Titanium HD with HD598
PSU:	Kingwin LZP-550
Software:	Win7 64bit SP1

Apr 24, 2010, 09:47 PM	#8
theonedub habe fidem Join Date: Apr 2009 Location: Northern CA Posts: 6,668 (4.42/day) Thanks: 2,319 Thanked 3,219 Times in 1,937 Posts System Specs	then there is probably a jumper on the board to do it. Read the manual and find out. __________________ My Heatware Feedback 129+ Pristine

System Name:	BlackPanther -- Great White Bengal
Processor:	E8400 @ 4Ghz 1.28V -- i7 930 @ 4Ghz
Motherboard:	Asus P5B -- Gigabyte GA-X58A-UD3R
Cooling:	Zalman CNPS9500 LED -- Scythe Yasya
Memory:	2x2048 DDR2 Apacer 890Mhz -- 3 x 2048 DDR3 Mushkin black line
Video Card:	Sapphire OC 5970 --Zotac 670 4GB
Hard Disk:	Intel 160GB SSD, eSata Seagate 250GB -- 240GB SSD Sandisk Extreme
Optical Drive:	LG DVD-RAM -- Sony BWU-500S-WW
CRT/LCD Model:	22" 1680x1050 LG Flatron -- 27" 2560x1440 Dell U2711
Case:	Aeroengine Jr -- NZXT Switch 810 White
Sound Card:	X-Fi Xtreme Music 5.1 -- Onboard sound & Z5500 Speakers
PSU:	Corsair HX850W Modular -- NZXT HALE90 850W PSU
Software:	Windows 7 x64 on both systems

Apr 24, 2010, 09:55 PM	#10
Hockster Join Date: Mar 2010 Location: Edmonton, AB Posts: 384 (0.33/day) Thanks: 7 Thanked 101 Times in 71 Posts System Specs	HSF plugged into the CPU fan header? 4/8 pin CPU aux power connected? __________________ My Movie Collection

System Name:	Project Neverending
Processor:	i7 3770@4.2
Motherboard:	Asus Z77 Sabertooth
Cooling:	Corsair H100
Memory:	8GB Corsair Vengeance 1600
Video Card:	Asus GTX 680
Hard Disk:	2 240GB Kingston HyperX 3K SSD's, 3 WD 1TB Caviar BE's
Optical Drive:	LG Blu-ray
CRT/LCD Model:	BenQ FP241 WZ, 2 Samsung 2443's
Case:	Corsair Graphite 600T White
Sound Card:	Supreme FX X-Fi
PSU:	Corsair HX 850
Software:	Windows 7 Pro 64
Benchmarks:	http://3dmark.com/3dm11/3779658

Apr 24, 2010, 09:59 PM	#11
-1nf1n1ty- Join Date: Nov 2006 Location: Winter Park Posts: 1,562 (0.65/day) Thanks: 247 Thanked 134 Times in 125 Posts System Specs	I did what the manual said and when I moved the cap over it doesnt even start up(lights are on,no fans are on ) jsut wont even let me get to bios

Apr 24, 2010, 10:01 PM	#13
Hockster Join Date: Mar 2010 Location: Edmonton, AB Posts: 384 (0.33/day) Thanks: 7 Thanked 101 Times in 71 Posts System Specs	Heat Sink Fan. __________________ My Movie Collection

System Name:	Asus K50-X5DAB
Processor:	Athlon QL-65 2.2Ghz
Memory:	1x1GB + 1X2GB
Video Card:	Mobility Radeon HD4570 512mb
Hard Disk:	Samsung 840 250Gb
CRT/LCD Model:	15.6" 1366x768

Apr 24, 2010, 10:05 PM	#16
LAN_deRf_HA Join Date: Apr 2008 Posts: 4,067 (2.14/day) Thanks: 295 Thanked 851 Times in 594 Posts System Specs	Standoffs keep the board from touching the back of the case and shorting out. I'm ashamed to say I built a system a number of years ago without them because all my previous cases had them built in so I had never needed them... but the fact that yours comes on for 4 full seconds makes me think it isn't a short, shorting systems usually only flash on for less than a second.

Apr 24, 2010, 10:28 PM	#21
-1nf1n1ty- Join Date: Nov 2006 Location: Winter Park Posts: 1,562 (0.65/day) Thanks: 247 Thanked 134 Times in 125 Posts System Specs	omg I feel retarded as shit! fuckignhell, sorry for the stupid questions, but YES I got my pc running cause I needed standoffs thanks everyone for the help HammerOn: yeah Im about to do that right now thank you

Apr 24, 2010, 10:31 PM	#22
LAN_deRf_HA Join Date: Apr 2008 Posts: 4,067 (2.14/day) Thanks: 295 Thanked 851 Times in 594 Posts System Specs	I almost didn't mention it cause I thought "nobody could be as dense as me"... glad I wasn't the only one to do that

Apr 24, 2010, 10:32 PM	#23
HammerON The Watchful Moderator Join Date: Mar 2009 Location: The Cold North Posts: 4,463 (2.84/day) Thanks: 4,057 Thanked 2,996 Times in 1,576 Posts System Specs	Glad you got her figured out man! I know how much it can suck when you get a rig together and then the danm thing won't work!!!

Apr 24, 2010, 10:40 PM	#25
-1nf1n1ty- Join Date: Nov 2006 Location: Winter Park Posts: 1,562 (0.65/day) Thanks: 247 Thanked 134 Times in 125 Posts System Specs	Alright problem number 2: I did the jumper thing, and placed it back but I still cant see the bios

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Friend bought new power supply and now pc wont turn on.	-1nf1n1ty-	General Hardware	18	Feb 2, 2010 02:29 PM
Just got my new AC Ryan fans... W00T!... But	oli_ramsay	Overclocking & Cooling	7	May 21, 2008 10:14 PM
PC wont turn on what am i missing?	xmountainxlionx	General Hardware	11	May 13, 2008 06:59 PM
Power supply wont turn on Asus A7N8X	paul06660	General Hardware	4	Apr 29, 2007 07:50 AM