Chimp Challenge Tech Assistance Thread - Page 2

msgclb · May 2, 2010, 10:31 PM

Quote:

Originally Posted by dustyshiv

Guys,

I am trying to setup my i7 to fold bigadv WU. But I am not getting assigned to one. I have to manually enter proxy info for the GPU clients. Is there a way to do so in the VMware player? I have chosen both bridged mode and NAT but not getting assigned any WU.

Appreciate your help!!

I did a Google search for 'vmware player 3.0 proxy' and this was one of the links. If that doesn't work then maybe you can find one with a search of your own. Good luck.

Make sure you use v3.0.0 as v3.0.1 only allows 4 cores for some reason.

Wile E · May 2, 2010, 10:34 PM

Does this PPD look about right guys?

PVTCaboose1337 · May 2, 2010, 10:37 PM

Quote:

Originally Posted by Wile E

Does this PPD look about right guys?

http://img.techpowerup.org/100502/Chimp826.png

From what I remember my 4850 did 2500 PPD, why would your superior card being doing less?

Wile E · May 2, 2010, 10:40 PM

Quote:

Originally Posted by PVTCaboose1337

From what I remember my 4850 did 2500 PPD, why would your superior card being doing less?

Depends on the work unit. I'm only folding on a single GPU on it, btw.

I'm more concerned about CPU output. Never folded on the SMP client before. Note that I am clocked at 3.6Ghz, for heat reasons.

And with 6GB of ram, would it benefit me to allow big work units.

p_o_s_pc · May 2, 2010, 11:10 PM

Quote:

Originally Posted by Wile E

Depends on the work unit. I'm only folding on a single GPU on it, btw.

I'm more concerned about CPU output. Never folded on the SMP client before. Note that I am clocked at 3.6Ghz, for heat reasons.

And with 6GB of ram, would it benefit me to allow big work units.

I would say thats about right for your CPU
my i7@3.9ghz is ~16k ppd so half of that would be 8k and take off alittle for the lower clocks and the ATI client taking up CPU cycles. Looks fine to me

mstenholm · May 3, 2010, 11:18 AM

I'm stock 2650 miles from my rigs and I will not be back on time for the kick-off. Damn. Will try to make up for it when I do come back. Good speed folders

crush3r · May 3, 2010, 01:30 PM

I'd like to represent TPU with some i7 Powarr but I'm completely lost in the whole VMWare business, what do i need to fold on this i7?

[Ion] · May 3, 2010, 01:34 PM

Quote:

Originally Posted by crush3r

I'd like to represent TPU with some i7 Powarr but I'm completely lost in the whole VMWare business, what do i need to fold on this i7?

Well, as you only have 3GB of RAM you can't run -bigadv, but at 3.8ghz you should get ~16k PPD running SMP2 (see guide in first post), at 4.5ghz you'd get a good bit more (20k+ PPD due to better bonuses)

crush3r · May 3, 2010, 01:39 PM

Thanks, ambients aren't on my side at the moment and at 3.8 she loads at ~75. Not too comfortable having it much higher than that. I'll set it up now and see how it goes

[Ion] · May 3, 2010, 01:44 PM

Quote:

Originally Posted by crush3r

Thanks, ambients aren't on my side at the moment and at 3.8 she loads at ~75. Not too comfortable having it much higher than that. I'll set it up now and see how it goes

Ambients are a bit of an issue, at 3.4ghz on my X4 I'm getting close to 60C load (highest I tolerate for AMD CPUs) with up to 90F ambients...hopefully the Corsair H50 which is due to arrive Wednesday will help

You'll need the passkey in order to get the bonuses, and enter the username/team as ChimPowerUp and 50711, respectively. PM me for the passkey

crush3r · May 3, 2010, 01:45 PM

One more thing, will SMP2 use all 8 threads, it says "SMP is mainly for Dual Core and Quad Core CPU's" and do I need to do the bit with replacing the exe with win32 one? I'm on win7 64

[Ion] · May 3, 2010, 01:47 PM

Quote:

Originally Posted by crush3r

One more thing, will SMP2 use all 8 threads, it says "SMP is mainly for Dual Core and Quad Core CPU's" and do I need to do the bit with replacing the exe with win32 one? I'm on win7 64

I've never used SMP2, so you'll need to check w/ one of the experts here (I've only ever used quads and duals), but if you add the -smp 8 flag to the shortcut (along with -smp -advmethods) you should use all 8 threads)

crush3r · May 3, 2010, 01:49 PM

Could an i7 pro chime in? Cheers Ion!

[Ion] · May 3, 2010, 01:53 PM

Quote:

Originally Posted by crush3r

Could an i7 pro chime in? Cheers Ion!

PM Buck Nasty or p_o_s_pc, I know they've both had practical experience with i7s (and SMP), I've only had practical experience with the latter and theoretical experience with both (reading

)

crush3r · May 3, 2010, 03:44 PM

I set it up according to the 'How to set up Windows SMP/SMP2 CPU Client' thread and I'm getting this

Any ideas?

EDIT: Re-ran install.bat and it's working now, but only on 1 thread?!

EDIT 2: It's now running at 50% cpu usage?

bogmali · May 3, 2010, 04:03 PM

SMP2 will use all eight cores with the flags: -smp 8 -advmethods -verbosity 9

I found that the VMware image is more responsive than the windows client when running non-bigadv WUs. You can use the -bigadv FAQ that I had. Instead of running the command ./fah6 -bigadv -smp 7 or 8, you can just do ./fah6 -advmethods -smp 8 and watch it fly

crush3r · May 3, 2010, 04:06 PM

It's now running all 8. If the system's unstable will it tell me on the spot when it has an error or just wait till the end of the WU and say it's not valid?

bogmali · May 3, 2010, 04:12 PM

Quote:

Originally Posted by crush3r

It's now running all 8. If the system's unstable will it tell me on the spot when it has an error or just wait till the end of the WU and say it's not valid?

You will get errors once it starts folding, usually right away if your rig is unstable.

dustyshiv · May 3, 2010, 06:33 PM

Guys,

Could anyone please tell me the smp and bigadv WU assignment servers? I am not getting assigned a WU.

Ping to these servers get me 4 replies. But when I open these in a browser on port 80 or 8080, it says blocked.

171.64.65.54
130.237.232.140

msgclb · May 3, 2010, 09:34 PM

Quote:

Originally Posted by dustyshiv

Guys,

Could anyone please tell me the smp and bigadv WU assignment servers? I am not getting assigned a WU.

Ping to these servers get me 4 replies. But when I open these in a browser on port 80 or 8080, it says blocked.

171.64.65.54
130.237.232.140

All of my bigadv rigs use this assignment server.

171.62.108.22

You might be interested in this Folding@home server status link

p_o_s_pc · May 3, 2010, 10:59 PM

I have never owned a 8600GT before but would you say ~2.1k PPD is good for the GPU? (shaders at 1650mhz) 353pt WU btw

[Ion] · May 3, 2010, 11:41 PM

Quote:

Originally Posted by p_o_s_pc

I have never owned a 8600GT before but would you say ~2.1k PPD is good for the GPU? (shaders at 1650mhz) 353pt WU btw

That's incredible, I got ~1700 on 353pt WUs on an EVGA 8600GTS SSC, less on larger WUs (down to ~1400 on 1888s)

p_o_s_pc · May 4, 2010, 12:44 AM

Quote:

Originally Posted by crush3r

Could an i7 pro chime in? Cheers Ion!

the SMP 2 client WILL run on all 8threads WITHOUT using any flags. The new A3 core added support for 8threads. All you have to do is setup the SMP2 client like normal and all is good

Chicken Patty · May 4, 2010, 04:32 AM

guys, does everything seem to be working fine?

hertz9753 · May 4, 2010, 07:29 AM

Posting to receive updates.

System Name:	My System
Processor:	AMD Phenom II X4 965 BE
Motherboard:	ASUS M5A97 R2.0
Cooling:	Corsair H100 Cooler
Memory:	G.SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866
Video Card:	EVGA - GeForce GTX 660 Ti Superclocked
Hard Disk:	Western Digital
Optical Drive:	LG-Internal Blu-ray DVD Drive GBC-H20LI
CRT/LCD Model:	BenQ G2400WD Black 24"
Case:	NZXT Crafted Series Tempest 410 Elite
Sound Card:	Onboard HD Audio
PSU:	Thermaltake Black Widow W0319RU 850W
Software:	Windows 8 Pro w/ Media Center

May 2, 2010, 10:34 PM	#27
Wile E Power User Join Date: Oct 2006 Location: Western PA (Pittsburgh suburbs) Posts: 18,129 (7.47/day) Thanks: 450 Thanked 3,826 Times in 3,124 Posts System Specs	Does this PPD look about right guys? __________________ Visit Ashentech “What the hell did you expect? Leave Vista under the pillow and the OS fairy would make it Win7?” -El Fiendo “And Bring Mailman back god damnit, he is the Eric Cartman of TPU” -MRCL

System Name:	The ClusterF**k
Processor:	980X @ 4212Mhz 24/7
Motherboard:	Gigabyte GA-EX58-UD5 BIOS F12
Cooling:	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory:	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24
Video Card:	Evga GTX 580
Hard Disk:	Seagate 7200.10 320GB x2 RAID0; 2 x Samsung F2 1.5TB; 1 x F1 1TB; 1 x F4 2TB
Optical Drive:	LG WH10LS30K 10X Blu-ray Burner
CRT/LCD Model:	HP LP2475w 24" 1920x1200 IPS
Case:	Technofront Bench Station
Sound Card:	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
PSU:	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software:	Win7 Ultimate N x64

System Name:	Whim
Processor:	Intel Core i5 2500k @ 4.4ghz
Motherboard:	Gigabyte P67A-D3-B3
Cooling:	Cooler Master Hyper 212+
Memory:	2 x 4GB G.Skill Ripjaws @ 1600mhz
Video Card:	Gigabyte GTX 670 2gb
Hard Disk:	WD 640gb Black (Main), WD 2tb Black (Secondary)
Optical Drive:	LG DVD-RW Drive
CRT/LCD Model:	Asus VE228 and Samsung 2053BW
Case:	Cooler Master 430 Elite
Sound Card:	Onboard > PA2V2 Amp > Senn 595's
PSU:	Seasonic 650w
Software:	Windows 7 Ultimate (Tweaked)

System Name:	The ClusterF**k
Processor:	980X @ 4212Mhz 24/7
Motherboard:	Gigabyte GA-EX58-UD5 BIOS F12
Cooling:	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory:	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24
Video Card:	Evga GTX 580
Hard Disk:	Seagate 7200.10 320GB x2 RAID0; 2 x Samsung F2 1.5TB; 1 x F1 1TB; 1 x F4 2TB
Optical Drive:	LG WH10LS30K 10X Blu-ray Burner
CRT/LCD Model:	HP LP2475w 24" 1920x1200 IPS
Case:	Technofront Bench Station
Sound Card:	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
PSU:	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software:	Win7 Ultimate N x64

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

May 3, 2010, 11:18 AM	#31
mstenholm Join Date: Nov 2009 Location: Denmark Posts: 1,772 (1.37/day) Thanks: 1,009 Thanked 1,048 Times in 644 Posts System Specs	I'm stock 2650 miles from my rigs and I will not be back on time for the kick-off. Damn. Will try to make up for it when I do come back. Good speed folders

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

May 3, 2010, 01:30 PM	#32
crush3r Join Date: Apr 2008 Location: Manchester, UK Posts: 343 (0.19/day) Thanks: 215 Thanked 61 Times in 55 Posts System Specs	I'd like to represent TPU with some i7 Powarr but I'm completely lost in the whole VMWare business, what do i need to fold on this i7? __________________ HEAT

Processor:	i7 920 D0 @ 3.2Ghz 0.95V / 4.45Ghz @ 1.35V
Motherboard:	Gigabyte EX58-UD3R
Cooling:	Xig s1283 with Push/Pull Fans
Memory:	6GB Corsair XMS3 1600mhz
Video Card:	HIS 6950 2GB @ 950/1300
Hard Disk:	Samsung F3 500
Optical Drive:	Samsung Lightscribe DVD-RW
CRT/LCD Model:	24" Acer V243HLmb LED
Case:	CM690 modded for airflow
Sound Card:	Xonar D1 -> Marantz CR502 -> B&W 686 + RSW12
PSU:	PC Power & Cooling Silencer 750
Software:	Win7 x64 Home Premium
Benchmarks:	SP1M - 10s AQM - 202,200 marks w/ 8800gs + E7300 3D '06 - 26,000 4890+4870

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

May 3, 2010, 01:39 PM	#34
crush3r Join Date: Apr 2008 Location: Manchester, UK Posts: 343 (0.19/day) Thanks: 215 Thanked 61 Times in 55 Posts System Specs	Thanks, ambients aren't on my side at the moment and at 3.8 she loads at ~75. Not too comfortable having it much higher than that. I'll set it up now and see how it goes __________________ HEAT

May 3, 2010, 01:45 PM	#36
crush3r Join Date: Apr 2008 Location: Manchester, UK Posts: 343 (0.19/day) Thanks: 215 Thanked 61 Times in 55 Posts System Specs	One more thing, will SMP2 use all 8 threads, it says "SMP is mainly for Dual Core and Quad Core CPU's" and do I need to do the bit with replacing the exe with win32 one? I'm on win7 64 __________________ HEAT

May 3, 2010, 01:49 PM	#38
crush3r Join Date: Apr 2008 Location: Manchester, UK Posts: 343 (0.19/day) Thanks: 215 Thanked 61 Times in 55 Posts System Specs	Could an i7 pro chime in? Cheers Ion! __________________ HEAT

May 3, 2010, 03:44 PM	#40
crush3r Join Date: Apr 2008 Location: Manchester, UK Posts: 343 (0.19/day) Thanks: 215 Thanked 61 Times in 55 Posts System Specs	I set it up according to the 'How to set up Windows SMP/SMP2 CPU Client' thread and I'm getting this Any ideas? EDIT: Re-ran install.bat and it's working now, but only on 1 thread?! EDIT 2: It's now running at 50% cpu usage? __________________ HEAT Last edited by crush3r; May 3, 2010 at 03:54 PM.

May 3, 2010, 04:03 PM	#41
bogmali In Orbe Terrum Non Visi Join Date: Mar 2008 Location: Olympia, WA Posts: 6,041 (3.19/day) Thanks: 1,194 Thanked 4,109 Times in 2,080 Posts System Specs	SMP2 will use all eight cores with the flags: -smp 8 -advmethods -verbosity 9 I found that the VMware image is more responsive than the windows client when running non-bigadv WUs. You can use the -bigadv FAQ that I had. Instead of running the command ./fah6 -bigadv -smp 7 or 8, you can just do ./fah6 -advmethods -smp 8 and watch it fly __________________ “I have pretty much own every card known to man. what should I use?” -W1zzard “I quit smoking pot a while ago.. but not today” -erocker HEATWARE My F/S Thread

System Name:	Main/Server
Processor:	Core i7-3820 @4.0Ghz/i7-2600K
Motherboard:	Gigabyte X79-UD3/Gigabyte Z68A-D3H-B3
Cooling:	Corsair H70/CoolIt Vantage ALC
Memory:	Samsung MV-3V4G3D/US DDR3-1600 4X4GB/Kingston KVR16N11K2/16 2X8GB
Video Card:	MSI GTX660ti Power Edition/EVGA GTX-680
Hard Disk:	Samsung 830 256GB SSD, Seagate 320GB/Samsung 840 256GB SSD, 2 WD Green 1.5TB
Optical Drive:	Samsung DVD/LG DVD-RW/NEC DVD-RW ND-3540A
CRT/LCD Model:	LG Flatron E2350V
Case:	Antec Eleven Hundred/Rocketfish Case (Lian-Li made)
Sound Card:	Onboard
PSU:	Enermax Infinity 720W/Rosewill Xtreme 950W
Software:	Win7 Ultimate 64 /Win7 Professional
Benchmarks:	Xbox Live Gamertag=jondonken

May 3, 2010, 04:06 PM	#42
crush3r Join Date: Apr 2008 Location: Manchester, UK Posts: 343 (0.19/day) Thanks: 215 Thanked 61 Times in 55 Posts System Specs	It's now running all 8. If the system's unstable will it tell me on the spot when it has an error or just wait till the end of the WU and say it's not valid? __________________ HEAT

May 3, 2010, 06:33 PM	#44
dustyshiv Join Date: Aug 2008 Location: Dubai, U.A.E Posts: 504 (0.29/day) Thanks: 1,096 Thanked 395 Times in 171 Posts System Specs	Guys, Could anyone please tell me the smp and bigadv WU assignment servers? I am not getting assigned a WU. Ping to these servers get me 4 replies. But when I open these in a browser on port 80 or 8080, it says blocked. 171.64.65.54 130.237.232.140 __________________ Save Human Lives by JOINING TEAM TPU WCG DONATE your UNUSED CPU TIME (which would otherwise go wasted) to HELP MANKIND. This is e-CHARITY CHANGE= ZEITGEIST MOVEMENT

System Name:	Reebok
Processor:	Intel(R) Core(TM) i7 CPU 920 @4.2GHz DO Stepping
Motherboard:	Gigabyte EX58-EXTREME
Cooling:	EK-Supreme HF High Flow CPU WB+2 X EK-FC9800 GTX GPU WBS+Gigabyte NB WB+XSPC 120QuadRadw SanAce fans
Memory:	3 X 2GB Corsair Dominator DDR3-PC3 1600 CL8 Kit w Corsair Airflow Fan
Video Card:	XFX Geforce 9800 GTX Black Edition + Point of View 9800 GTX Overclocked Edition+ XFX 9800GT
Hard Disk:	1TB Seagate SATAII + Seagate 600 GB SATA II
Optical Drive:	Samsung SH-S223F DVD-RW SATA Interface
CRT/LCD Model:	Samsung SyncMaster 2220WM
Case:	Coolermaster Stacker 830 Nvidia Edition
Sound Card:	Creative Soundblaster PCI Express X-Fi Titanium Fatal1ty Champion Series
PSU:	Corsair HX850W PSU
Software:	Windows 7 Ultimate 64-Bit

May 3, 2010, 10:59 PM	#46
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	I have never owned a 8600GT before but would you say ~2.1k PPD is good for the GPU? (shaders at 1650mhz) 353pt WU btw __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

May 4, 2010, 04:32 AM	#49
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	guys, does everything seem to be working fine? __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

May 4, 2010, 07:29 AM	#50
hertz9753 Join Date: Sep 2009 Location: Bismarck, ND Posts: 1,047 (0.77/day) Thanks: 1,897 Thanked 460 Times in 305 Posts System Specs	Posting to receive updates.

System Name:	Fuzzy Bunny
Processor:	AMD Phenom II X4 980
Motherboard:	Foxconn Destroyer
Cooling:	Corsair H50
Memory:	OCZ Reaper HPC 4GB (2 x 2GB)
Video Card:	Nvidia GTX 570
Hard Disk:	Western Digital Caviar Black WD7501AALS 750GB
Optical Drive:	Sony
CRT/LCD Model:	ASUS VW222U 22"
Case:	Antec 300
Sound Card:	Stock
PSU:	CoolerMaster Gold 1000 Watt
Software:	Windows 7 64

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
* F@H Tech Assistance Thread *	BUCK NASTY	Folding@Home	2061	May 18, 2013 04:14 PM
Chimp Challenge poll will you F@H for TPU on May the 4th?	777	Folding@Home	129	Apr 27, 2010 02:30 AM
Chimp Challenge Avatar Thread	BUCK NASTY	Folding@Home	29	Apr 12, 2010 09:47 AM
[FS] Wayward's Tech Liquidation Thread	Wayward	Buy/Sell/Trade/Giveaway Forum	27	Sep 12, 2007 03:33 AM