TPU's WCG/BOINC Team - Page 355

mjkmike · May 7, 2010, 02:56 AM

also with new cruncher news. I finally got a 1055t and a new 880gm-ud2h.
will be putting the t in main rig and giving the 955 a new home in the 880gm.
My numbers will be down for a bit but will go up after.
the i7 930 stays as she is crunching for stan.

[Ion] · May 7, 2010, 03:13 AM

Awesome!

Chicken Patty · May 7, 2010, 04:14 AM

Quote:

Originally Posted by mjkmike

also with new cruncher news. I finally got a 1055t and a new 880gm-ud2h.
will be putting the t in main rig and giving the 955 a new home in the 880gm.
My numbers will be down for a bit but will go up after.
the i7 930 stays as she is crunching for stan.

Great news. Whether for stan or not, it's still for TPU

Phxprovost · May 7, 2010, 05:29 AM

Just competed my permanent transition over to ubuntu, been running on it for a few days and have everything set up the way i want it, got bionic downloaded again and im now crunching away

Its been awhile but im finally at a point where im comfortable leaving my pc on 24/7 so should actually be able to help out from now on

HammerON · May 7, 2010, 06:23 AM

Quote:

Originally Posted by Phxprovost

Just competed my permanent transition over to ubuntu, been running on it for a few days and have everything set up the way i want it, got bionic downloaded again and im now crunching away

Its been awhile but im finally at a point where im comfortable leaving my pc on 24/7 so should actually be able to help out from now on

Move to Alaska and keep the windows open

Solaris17 · May 7, 2010, 06:23 AM

can someone run me through how to set them up on GPU's? im not a crunch guy so anything other than install set to 100% is a bit new to me.

[Ion] · May 7, 2010, 12:32 PM

Quote:

Originally Posted by Solaris17

can someone run me through how to set them up on GPU's? im not a crunch guy so anything other than install set to 100% is a bit new to me.

Well, WCG doesn't support GPUs, however, if you check out the link in my sig, it contains everything you'll need to get WCG set up on your CPU(s)

Also, what's this?

37c full load after 20 minutes of WCG

Ambients are currently about 68f

mjkmike · May 7, 2010, 12:53 PM

@ION, What's wrong with the temps?, looks good too me.
You're only at 1.337v and 3.4GHz.

(FIH) The Don · May 7, 2010, 12:54 PM

guess the H50 works pretty well after all

[Ion] · May 7, 2010, 01:00 PM

Quote:

Originally Posted by mjkmike

@ION, What's wrong with the temps?, looks good too me.
You're only at 1.337v and 3.4GHz.

Well, I'm excited by how low they were, it's a good 13c drop from last night (and I'm actually at 1.27v, CoreTemp reports it wrong). Nothing wrong

(FIH) The Don · May 7, 2010, 01:03 PM

1.337 volt any1?

mjkmike · May 7, 2010, 01:29 PM

sounds like it is time to play.

Chicken Patty · May 7, 2010, 02:34 PM

So Ion I'd loving the H50 afterall

p_o_s_pc · May 7, 2010, 07:54 PM

Quote:

Originally Posted by Chicken Patty

Im hitting about 48ºc right now, 3.4 GHz @ 1.262v. running a Xiggy S1283 since I got rid of my H50 a while back.

With my WCing loop(that cost much more then a H50) only running 1 fan on the 120.2 rad and 1 fan on the 140.1 i am running 50c on the i7@3ghz@1.15v (hot little fucker isn't it)

mstenholm · May 7, 2010, 08:11 PM

What's up with all this water? 4 GHz on a D0 i920 and 55 C max on air, 100 % crunch. It's stil a bit to the cold side in Denmark

That aside that is some impressive low temps ION.

KieX · May 7, 2010, 08:34 PM

Does anyone know what affects stability for the Human Proteome Folding - Phase 2 project?

My i7 @ stock is having loads of errors compared to my Q9550 @ 3.8. Meanwhile the Q8400 @ 3.2 has never had a single error

(FIH) The Don · May 7, 2010, 08:39 PM

@ p_o_s_pc

dont know if you know this, but i see you own a RII Gene

then you might wanna see this

http://forums.techpowerup.com/showpo...postcount=8158

p_o_s_pc · May 7, 2010, 08:44 PM

Quote:

Originally Posted by (FIH) The Don

@ p_o_s_pc

dont know if you know this, but i see you own a RII Gene

then you might wanna see this

http://forums.techpowerup.com/showpo...postcount=8158

i didn't know that. Thanks for letting me know... All the more reason to build a 2nd loop and water cool everything.

btw if anyone was wondering why i backed down from 3.9ghz its because i redid my WCing loop and haven't put all the fans back in yet and i am waiting on my new PSU(this one is giving me hell when overclocked)

mstenholm · May 7, 2010, 08:56 PM

Quote:

Originally Posted by KieX

Does anyone know what affects stability for the Human Proteome Folding - Phase 2 project?

My i7 @ stock is having loads of errors compared to my Q9550 @ 3.8. Meanwhile the Q8400 @ 3.2 has never had a single error

http://img.techpowerup.org/100507/niError.jpg

As far as I have read then some OC'ed rigs have problems with HPF's. I used to have it on my i7 as well (4 GHz) and a few errors on my 4 GHz E8400 but none on my 3.6 GHz E8400. My i7 still have the same OC but new MB and when I do have errors then it's on all projects. The general advice has be to avoid them if they cause problems.

Chicken Patty · May 7, 2010, 10:51 PM

Quote:

Originally Posted by p_o_s_pc

With my WCing loop(that cost much more then a H50) only running 1 fan on the 120.2 rad and 1 fan on the 140.1 i am running 50c on the i7@3ghz@1.15v (hot little fucker isn't it)

I'm talking about my Phenom though

Quote:

Originally Posted by KieX

Does anyone know what affects stability for the Human Proteome Folding - Phase 2 project?

My i7 @ stock is having loads of errors compared to my Q9550 @ 3.8. Meanwhile the Q8400 @ 3.2 has never had a single error

http://img.techpowerup.org/100507/niError.jpg

Same here man, one of my rigs is fine, one errors all WU's. If it errors I just disable that project.

KieX · May 7, 2010, 11:07 PM

Yeah think I'll have to assign a different profile without HPF-P2 for the i7. Just found it odd that OC'd computers are fine yet the stock one isn't

Ah well... thanks anyways guys

[Ion] · May 8, 2010, 12:42 AM

Quote:

Originally Posted by KieX

Does anyone know what affects stability for the Human Proteome Folding - Phase 2 project?

My i7 @ stock is having loads of errors compared to my Q9550 @ 3.8. Meanwhile the Q8400 @ 3.2 has never had a single error

http://img.techpowerup.org/100507/niError.jpg

Yes. HPF2 does not like x64 OSs, particularly Vista and 7. It errors out instantly on my X4 955 (Win7 Pro x64) and P8600 (Win7 Pro x64) and runs fine on my XP machines (E6550, Q6600, P4s). So setup device profiles to keep it away from x64 rigs, or don't run it at all

[Ion] · May 8, 2010, 01:01 AM

So I'm now at 3.6ghz...50c on the H50, admittedly with higher-than-average ambients (currently running Prime95). I'll let you guys know how this works out

mjkmike · May 8, 2010, 01:38 AM

How do find info about the chimp thing.
Do the need help or the aok?

(FIH) The Don · May 8, 2010, 01:41 AM

http://forums.techpowerup.com/showthread.php?t=121019

May 7, 2010, 02:56 AM	#8851
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,480 (1.24/day) Thanks: 2,690 Thanked 3,746 Times in 980 Posts System Specs	also with new cruncher news. I finally got a 1055t and a new 880gm-ud2h. will be putting the t in main rig and giving the 955 a new home in the 880gm. My numbers will be down for a bit but will go up after. the i7 930 stays as she is crunching for stan. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

Processor:	just a few i7's all AMD's gone to friends
Motherboard:	Mother F%#@& am I board
Cooling:	It's called Alberta Canada.
Memory:	Don't remember.
Video Card:	Hope for blckjack
Hard Disk:	hurt my toe's when droped
Optical Drive:	need new glasses
CRT/LCD Model:	never big enough
Case:	I think they call it a lost case
Sound Card:	What speek up I'm old.
PSU:	Good old coffee
Software:	when you get this old everything is soft
Benchmarks:	Always on the bench never on the field.

May 7, 2010, 03:13 AM	#8852
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,656 (7.93/day) Thanks: 8,241 Thanked 9,321 Times in 4,259 Posts System Specs	Awesome! __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

May 7, 2010, 05:29 AM	#8854
Phxprovost Xtreme Refugee Join Date: Apr 2009 Location: Pennsylvania Posts: 1,148 (0.76/day) Thanks: 240 Thanked 264 Times in 190 Posts System Specs	Just competed my permanent transition over to ubuntu, been running on it for a few days and have everything set up the way i want it, got bionic downloaded again and im now crunching away Its been awhile but im finally at a point where im comfortable leaving my pc on 24/7 so should actually be able to help out from now on __________________ “They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety.”

System Name:	Result of Boredom
Processor:	AMD Phenom II X4 940
Motherboard:	M3A78-T
Cooling:	Enzo Tech Extreme-X
Memory:	Mushkin (996599) X 4
Video Card:	EVGA GTX 465
CRT/LCD Model:	Asus 22in (1680X1050) X 2
Case:	antec 300
Sound Card:	Xonar DG
Software:	WIN7 64bit HP
Benchmarks:	Push power button = It boots up and does the stuff i need it to

System Name:	Cruncher/Gamer
Processor:	i7 970
Motherboard:	ASUS Rampage III Extreme
Cooling:	H2O
Memory:	Patriot Viper Extreme 12GB 2000
Video Card:	2x VisionTek HD 7970's
Hard Disk:	OCZ Vertex 4 256GB x2 in Raid0 + WD 640GB
Optical Drive:	ASUS Blu-Ray
CRT/LCD Model:	Dell UltraSharp U3011 30"
Case:	Corsair Obsidian 800D
Sound Card:	On-board
PSU:	Corsair AX1200
Software:	Win 7 64bit
Benchmarks:	Always changing~

May 7, 2010, 06:23 AM	#8856
Solaris17 Creator Solaris Utility DVD Join Date: Aug 2005 Location: Reinacting scenes from platoon with Charlie Sheen Posts: 13,708 (4.84/day) Thanks: 4,365 Thanked 3,295 Times in 2,311 Posts System Specs	can someone run me through how to set them up on GPU's? im not a crunch guy so anything other than install set to 100% is a bit new to me. __________________ I Made the Millionth post! \| "Please come to WI now so I can beat you over the head with a bratwurst."-Kreij PS3 mod 8500/8600GT Mod Guide Rebuild a Copperhead Heat Ware NF4 Ultra SLI Mod Solaris Utility DVD 4.0 Broken CPU pin guide Vista Mark

System Name:	Prometheus
Processor:	Xeon W 3520 4.5ghz
Motherboard:	DFI Lanparty UT t3eH8
Cooling:	Xigmatek Dark Knight
Memory:	(3x8GB) 24GB Avexir Core series triple channel 1600mhz
Video Card:	MSI GTX470
Hard Disk:	OCZ Agility3 120, SS 1TB, SS 2TB
Optical Drive:	Pioneer DVD Dual layer burner R+RW (Firmware Upgrade)/Philips lightscribe DVD burner Dual layer
CRT/LCD Model:	Dell 2007FP
Case:	Xigmatek Utgard
Sound Card:	ASUS Xonar D2X 7.1 on Logitec X-540/Razer Carcharias
PSU:	Corsair HX1000
Software:	Windows8 x64 \|\|Poser7, Cinema4D, CS5, 3DSM10, Lightwave9, Bryce7
Benchmarks:	I'm such a tease

May 7, 2010, 12:53 PM	#8858
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,480 (1.24/day) Thanks: 2,690 Thanked 3,746 Times in 980 Posts System Specs	@ION, What's wrong with the temps?, looks good too me. You're only at 1.337v and 3.4GHz. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

May 7, 2010, 12:54 PM	#8859
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	guess the H50 works pretty well after all __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

System Name:	Ivy Biatch
Processor:	i5 3570K
Motherboard:	ASSRockzz z77TOTHEEXTREME!!!!
Cooling:	bleh
Memory:	2x4gb crucial 1866
Video Card:	HD7770, yes it does BF3
Hard Disk:	120gb Vertex
Optical Drive:	hmm
CRT/LCD Model:	226BW
Case:	whats that, oh my table
Sound Card:	stock onboard thing
PSU:	HX850W
Software:	7

May 7, 2010, 01:03 PM	#8861
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	1.337 volt any1? __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

May 7, 2010, 01:29 PM	#8862
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,480 (1.24/day) Thanks: 2,690 Thanked 3,746 Times in 980 Posts System Specs	sounds like it is time to play. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

May 7, 2010, 02:34 PM	#8863
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,888 (11.93/day) Thanks: 15,149 Thanked 12,311 Times in 7,776 Posts System Specs	So Ion I'd loving the H50 afterall __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

May 7, 2010, 08:11 PM	#8865
mstenholm Join Date: Nov 2009 Location: Denmark Posts: 1,772 (1.37/day) Thanks: 1,009 Thanked 1,048 Times in 644 Posts System Specs	What's up with all this water? 4 GHz on a D0 i920 and 55 C max on air, 100 % crunch. It's stil a bit to the cold side in Denmark That aside that is some impressive low temps ION.

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

May 7, 2010, 08:34 PM	#8866
KieX Join Date: Dec 2009 Location: A Coruña, Spain Posts: 2,050 (1.64/day) Thanks: 6,950 Thanked 2,643 Times in 1,136 Posts System Specs	Does anyone know what affects stability for the Human Proteome Folding - Phase 2 project? My i7 @ stock is having loads of errors compared to my Q9550 @ 3.8. Meanwhile the Q8400 @ 3.2 has never had a single error __________________

System Name:	Slick
Processor:	Intel i5 2467M
Motherboard:	Samsung Series 5 Ultrabook
Memory:	8GB Corsair Value
Hard Disk:	Crucial M4 7mm 256GB
CRT/LCD Model:	13"
Software:	Windows 8 Pro x64

May 7, 2010, 08:39 PM	#8867
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	@ p_o_s_pc dont know if you know this, but i see you own a RII Gene then you might wanna see this http://forums.techpowerup.com/showpo...postcount=8158 __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

May 7, 2010, 11:07 PM	#8871
KieX Join Date: Dec 2009 Location: A Coruña, Spain Posts: 2,050 (1.64/day) Thanks: 6,950 Thanked 2,643 Times in 1,136 Posts System Specs	Yeah think I'll have to assign a different profile without HPF-P2 for the i7. Just found it odd that OC'd computers are fine yet the stock one isn't Ah well... thanks anyways guys __________________

May 8, 2010, 01:01 AM	#8873
[Ion] WCG Team Assistant Join Date: Sep 2009 Location: North Carolina, US Posts: 10,656 (7.93/day) Thanks: 8,241 Thanked 9,321 Times in 4,259 Posts System Specs	So I'm now at 3.6ghz...50c on the H50, admittedly with higher-than-average ambients (currently running Prime95). I'll let you guys know how this works out __________________ Ion's WCG Essentials Thread Crunching (64 Threads + 896 CUDA Cores + 6272 Shaders): i3-2100@ 3.1 + HD7850 -- Atom D510 @ 1.66 -- C2D-M T9600 @ 2.8 -- i7-3612QM @ 2.8 -- i7-860 @ 2.9 + HD7950 -- i7-2700k @ 4.4 + 2xGTX470 -- PentDC-M T4200 @ 2.0 -- i7-920 @ 3.83 + 3xHD7770 -- DP Xeon E5420 @ 2.5 + HD7930 -- E1600 @ 2.4

May 8, 2010, 01:38 AM	#8874
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,480 (1.24/day) Thanks: 2,690 Thanked 3,746 Times in 980 Posts System Specs	How do find info about the chimp thing. Do the need help or the aok? __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

May 8, 2010, 01:41 AM	#8875
(FIH) The Don Eligible for custom title Join Date: Aug 2009 Location: Viking Land Posts: 5,406 (3.92/day) Thanks: 3,101 Thanked 2,962 Times in 1,834 Posts System Specs	http://forums.techpowerup.com/showthread.php?t=121019 __________________ "there are 2 types of idiots. those who hate the new stuff to justify not being able to upgrade. and those who have no fucking clue about anything" -KieX “So with this new technology my video card will now fart?” -TheMailMan78

Currently Active Users Viewing This Thread: 3 (2 members and 1 guests)
F150_Raptor

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16538	May 21, 2013 01:56 PM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM