[Updated]AMD/ATi 2D Clock Guide

[ViZioN207]

Originally Posted by alexsubri

Erocker, I do all the steps, but I have no -> Local -> ATI folder? What am I doing wrong?

Do you have your folder options set so Hidden Folders are shown? The location of the folder is here also. C:\Users\*YourAccount*\AppData\Local\ATI

[alexsubri]

Originally Posted by ViZioN207

Do you have your folder options set so Hidden Folders are shown? The location of the folder is here also. C:\Users\*YourAccount*\AppData\Local\ATI

Thanks bro

[SB420]

Alex - If using windows 7 go to

Computer-Local Disk-Users-computername-appdata-local-ati-ace-profiles

In regards to my videos, i have the problem when watching youtube vids in full screen, its a new build so ive yet to test further.

As for blu-ray im testing the 1st one as we speak....

[SB420]

Seems i was too quick to moan. My problem seems to only occur when streaming videos in fullscreen, youtube etc. Playback of blu-rays is spot on.

After reading several threads with audio drop out over HDMI i assumed it was the same prob, though with playback of media its fine.

[cadaveca]

I'm getting HMDI issues with Bluray playback...seems to depend on what device I plug into though...

[moriz]

a word of caution for those who run dual monitors: don't use this trick. doing so will result in an immediate GSoD.

instead, use atitraytools and enable its auto overclocking feature, and let that handle 2D/3D profiles.

and i also have to question this profile trick's stability. i did the exact same thing on my old 4850 two years ago, when i was trying to get around the dual monitors+overclocking bug. the trick will work, often for hours or days at a time, but will always result in a GSoD sooner or later.

[TheMailMan78]

Man I was watchin some porn and it BSOD on me. Going to try this fix tonight. Thanks Erocker. Your the best!

[buggalugs]

I dont have any playback issues with my 5870 but just to let you know adobe flash have just released the version 10.1 with supposedly hardware acceleration.

[erocker]

Originally Posted by buggalugs

adobe flash have just released the version 10.1 with supposedly hardware acceleration.

Make sure to use the Adobe uninstaller before installing Flash 10.1. I had some issues by not running the uninstaller, but they were fixed by using it.

[buggalugs]

Originally Posted by erocker

Make sure to use the Adobe uninstaller before installing Flash 10.1. I had some issues by not running the uninstaller, but they were fixed by using it.

Ya, i uninstalled flash from both firefox and IE before i upgraded. Seems to work fine. My CPU usage is 0-4% when running fullscreen 1080p flash video. But i dont know what it used to be, i didnt have problems so i didnt check CPU usage on the old flash but apparently it could get up to 30% or something.

[Formula350]

An FYI to everyone, Cat 10.5 "fixed" this. It's 400/1200 now. It was actually increased because of poor multi-monitor performance, but that'll also take care of what erocker mentioned.

And by "Fix" I mean because those of us who weren't having issues are now having the cards clocked higher. I wish there was an editor for the OverDrive profiles for clocks and voltages (RBE is horrible in this regard heh) because I'd prefer 157/300 back on my 5770s :\ I'm using 10.3 now, and it's nice to have that back. I tried modifying Afterburner's INI to do what I need, but it won't clock lower than 400/600

[tbar]

Originally Posted by Formula350

I wish there was an editor for the OverDrive profiles for clocks and voltages (RBE is horrible in this regard heh) because I'd prefer 157/300 back on my 5770s :\ I'm using 10.3 now, and it's nice to have that back. I tried modifying Afterburner's INI to do what I need, but it won't clock lower than 400/600

Sounds like you were using an older version of RBE. Version 1.25 worked perfectly for me. With CCC 10.5 powerplay switches from 2D 304/575/1v to 3D 925/1225/1.088v no problem.

Here's my settings. I set the GPU clock to 304 instead of 300 to remind me what clock was being used. Hope this helps.

[Formula350]

Originally Posted by tbar

Sounds like you were using an older version of RBE. Version 1.25 worked perfectly for me. With CCC 10.5 powerplay switches from 2D 304/575/1v to 3D 925/1225/1.088v no problem.

Here's my settings. I set the GPU clock to 304 instead of 300 to remind me what clock was being used. Hope this helps.http://i992.photobucket.com/albums/a.../powerplay.jpg

I meant the profile editor, not RBE's BIOS portion :\ I wasn't able to flash my BIOS to my card anyhow The only thing I actually changed was the fan setting since I can already do 1200MHZ core, if I felt so inclined that is lol

But you are able to run your 5850 @ 1.088v even at 900+MHz? Makes me think my original find of 1.050v actually was stable, and Afterburner was what was causing the crash when I would change clocks (it isn't doing that anymore with this new version).

EDIT: Well for the hell of it I dropped it down to 1.1v as a start, and so far so good running FurMark... Wonder why on earth ASUS decided that 1.2V was necessary... Probably means that this CUcore cooler isn't nearly as bad as I originally thought >_>

[tbar]

Originally Posted by Formula350

I meant the profile editor, not RBE's BIOS portion :\ I wasn't able to flash my BIOS to my card anyhow The only thing I actually changed was the fan setting since I can already do 1200MHZ core, if I felt so inclined that is lol

I'm curious, what prevented you from flashing your BIOS?

[Formula350]

Originally Posted by tbar

I'm curious, what prevented you from flashing your BIOS?

So far every time, RBE and/or ATi WinFlash freeze the comp, and the one or two times I did get far enough for a flash to give an error, well I can't remember what it said :\ ATiFlash I guess is DOS only, as me trying to just use the -i (information) command, crashes the app

[erocker]

I've just updated this guide as since Catalyst 11.6, things need to be done differently. Any questions or tips on the layout please speak up!

Enjoy!

[Fatal]

I will have to give this a shot, my 2d clocks on my 5770’s are very high not sure what they are on my 4890.

[rickd]

I have an issue with playback of bluray etc on a new build with Win 7 64bit and an ati 6570.

Everything is smooth for about 10-20 minutes and then it starts to stuter tearably i think it is the downclock is so this little fix may solve it is that the typical outcome of this
?

Thanks Rick will try when i get home

[erocker]

Originally Posted by rickd

I have an issue with playback of bluray etc on a new build with Win 7 64bit and an ati 6570.

Everything is smooth for about 10-20 minutes and then it starts to stuter tearably i think it is the downclock is so this little fix may solve it is that the typical outcome of this
?

Thanks Rick will try when i get home

Be sure to check your power management options in Windows display properties. It could be a HDD powering down issue, but it of course could be a downclocking issue too.

[rickd]

Thanks yes have turned that off i believe although I have an SSD in this build so will check that...is there a way to stop the i3 2100 cpu downclocking too?

[FierceRed]

Hey erocker, thanks for updating this guide as I was about to PM you a few weeks ago when I saw someone post it, thought "YES, now I won't have stuttering when watching videos!" and then saw it wasn't updated for current CCC UI.

Here's a tip that you may or may not want to include in the guide:

For my purposes (Windows 7 Pro x64), showing hidden folders wasn't necessary nor was going through the My Documents folder.

Opening a Run window with Windows Key + R and running %appdata% brings up an Explorer window displaying everyones AppData\Roaming folder. It doesn't matter what their username is or whatever as % commands force the OS to open the relevant location in the shell regardless of username differences or relative folder location uniqueness.

So %appdata% will open Jim\AppData\Roaming when Jim runs it and Jane\AppData\Roaming when Jane runs it.

From this window, I just go up one folder level (by clicking AppData in the address bar) and go into the Local folder rather than the Roaming folder which the shell command defaults to, to reach the ATI\ACE\ locations the rest of the guide needs.

This universal command may help those confused and scared by their My Document folder or their folder option settings. This command also applies equally to Windows Vista.

Cheers.

[xBruce88x]

thanks for the update, now i won't have to tell ppl to use the old CCC with standalone driver update. (since this way would probably be better)

[theoneandonlymrk]

still works nice didnt take long either, which is nice as i just remmebered this dosnt get to idle anyway still i learned something %appdata% %anything% and ati ace config nice Erocker

hang on how come i only just found this , shoulda been stickied ! has it been,____er well done again then musta been me

[treehouse]

does not work for me with catalyst 11.8, anything extra need to be done?

it seems to fluctuate when i watch flash videos.

when i am in desktop mode (with no program running then it reverts to the lowest clock), is there a way to keep high even whilst in desktop mode?

[LordJummy]

Anyone else with 3-4 screens or dual screens running lower than stock 2d clocks on 6970's or 6950's? I'm curious if I should lower my 2d clocks for when I'm using my 6970's on my 3/4 screen setup and my 6950 on my dual screen setup. I want to minimize idle/desktop gpu usage and temps...