TPU's WCG/BOINC Team - Page 384

[Ion] · Jul 10, 2010, 02:57 PM

Quote:

Originally Posted by KieX

Checked out the new Clean Energy Project that SupremeOverlord mentioned in the 'stones thread. It says it requires a minimum of 1GB of RAM:

http://img.techpowerup.org/100710/Capture.jpg

Looks like if you get all your threads with the same project at any one time you will need 8GB on i7's, 6GB on Hex's, 4GB on Quads, 2GB on dualies. Unless BOINC is clever enough to queue WU's that don't have enough RAM to run.

Well damn, the P4 Celerons only have 512mb each

I might be bringing the C2D E6550 back online, not a lot but anything helps

Radical_Edward · Jul 10, 2010, 03:27 PM

So I'm still working on the OC a bit guys, it was stable for like 4 hours yesterday and then BSOD, I assume because it didn't have enough voltage, so I'm trying a tad more and we'll see how it goes, think this outta do it thou. I have it set at 1.35V, should do the trick as my brother is rocking an overclock of 3.2Ghz on 1.4V on almost the same CPU as mine.

Radical_Edward · Jul 11, 2010, 12:06 PM

So the new voltage seems to be working, been stable all day yesterday and last night. Other than when we had a power outage. (One of those small ones where the power goes off and back on a few moments later.)

Soylent Joe · Jul 11, 2010, 02:10 PM

Yeah so from around 11 am Friday to sometime this morning (Sunday) the little pavilion I have running upstairs produced a whopping 137 BOINC points. I'm pretty sure it's going to be worth it. Not to mention that it's always 90F up there. Even though I have my Ultra Kaze blowing onto the side of it, I'm surprised it hasn't overheated.

Chicken Patty · Jul 11, 2010, 04:49 PM

Quote:

Originally Posted by Soylent Joe

Yeah so from around 11 am Friday to sometime this morning (Sunday) the little pavilion I have running upstairs produced a whopping 137 BOINC points. I'm pretty sure it's going to be worth it. Not to mention that it's always 90F up there. Even though I have my Ultra Kaze blowing onto the side of it, I'm surprised it hasn't overheated.

Now that's the spirit

And that's pretty hot bro.

hat · Jul 11, 2010, 05:38 PM

Quote:

Originally Posted by [Ion]

Well damn, the P4 Celerons only have 512mb each

Those are single core though... I would be much more concerned about running BOINC on a quad core with 512MB ram... that's 3 more work units running at the same time than you. 512MB should be fine for one thread.

Quote:

Originally Posted by Soylent Joe

Yeah so from around 11 am Friday to sometime this morning (Sunday) the little pavilion I have running upstairs produced a whopping 137 BOINC points. I'm pretty sure it's going to be worth it. Not to mention that it's always 90F up there. Even though I have my Ultra Kaze blowing onto the side of it, I'm surprised it hasn't overheated.

137 BOINC points? Remember, the results don't instantly post once you send them in (well, they will be there, but they have to be validated first). Still... 137 points is still pretty low... my Athlon XP 2200+ throws out (slightly) more than that. How are you checking this? It takes BOINC some time to get "up to speed". If your rig is dishing out ~800PPD like mine, the BOINC manager program won't actually say 800 until some weeks ahead.

mstenholm · Jul 11, 2010, 06:09 PM

Quote:

Originally Posted by Soylent Joe

Yeah so from around 11 am Friday to sometime this morning (Sunday) the little pavilion I have running upstairs produced a whopping 137 BOINC points. I'm pretty sure it's going to be worth it. Not to mention that it's always 90F up there. Even though I have my Ultra Kaze blowing onto the side of it, I'm surprised it hasn't overheated.

I had a P4 M running for 60 days @ 80 C. They are hard to kill.

Soylent Joe · Jul 11, 2010, 06:47 PM

I was just looking at the device statistics in My Grid. I'll take a look at it after it updates again though. It ran for about 48 hours and is only showing 3 hours runtime (even though it updated and got the information from it this morning).

Chicken Patty · Jul 12, 2010, 04:39 AM

an FYI

X6 had some downtime today, like four hours total.

ERazer · Jul 12, 2010, 08:31 PM

16 thread up and running again

btw hows amd x6 core @ crunching any good? thinking getting one

hat · Jul 12, 2010, 08:50 PM

I'm trying to get my Athlon XP 2200+ running again, but I need a wireless card for it. I bought one but it's taking forever to get here...

[Ion] · Jul 12, 2010, 09:00 PM

Quote:

Originally Posted by ERazer

16 thread up and running again

btw hows amd x6 core @ crunching any good? thinking getting one

'Bout the same as an i7 IIRC

Apparently the E6550 is staying offline, I've been told no about putting WCG back on it

ERazer · Jul 12, 2010, 09:55 PM

Quote:

Originally Posted by [Ion]

'Bout the same as an i7 IIRC

Apparently the E6550 is staying offline, I've been told no about putting WCG back on it

sorry to hear that bud

Chicken Patty · Jul 12, 2010, 10:47 PM

Quote:

Originally Posted by ERazer

16 thread up and running again

btw hows amd x6 core @ crunching any good? thinking getting one

Mine puts out about 1k less per day at same clocks than my i7. However keep in mind my i7 is a dedicated cruncher while my X6 is not. Might pause while some gaming or stuff.

ERazer · Jul 13, 2010, 05:35 AM

talk about stress running wcg and milkyway ATI really pushing my h20 cooling

Chicken Patty · Jul 13, 2010, 05:36 AM

Crunching or folding, even if my loop took a beating, it'll make me proud

ERazer · Jul 13, 2010, 05:40 AM

love my gentle typhoon running pull blast and still silent

might add 2nd loop

Chicken Patty · Jul 13, 2010, 05:42 AM

Quote:

Originally Posted by ERazer

love my gentle typhoon running pull blast and still silent

might add 2nd loop

Which Gentle Typhoons do you have? I'm looking to buy some quieter fans in the future to see if I can quite down my rigs a bit. getting louder by the day in here

ERazer · Jul 13, 2010, 05:44 AM

Quote:

Originally Posted by Chicken Patty

Which Gentle Typhoons do you have? I'm looking to buy some quieter fans in the future to see if I can quite down my rigs a bit. getting louder by the day in here

got this normally i run it 1200rpm

http://www.sidewindercomputers.com/scge120mmsic2.html

Chicken Patty · Jul 13, 2010, 05:56 AM

Quote:

Originally Posted by ERazer

got this normally i run it 1200rpm

http://www.sidewindercomputers.com/scge120mmsic2.html

Thanks for the link, I'll be getting something similar shortly!

ERazer · Jul 13, 2010, 09:53 PM

hmm is server down? got 10 WU back log

p_o_s_pc · Jul 13, 2010, 09:54 PM

anyone else having problems with uploading/downloading work?

mjkmike · Jul 13, 2010, 09:59 PM

server has been down for me for about four hours now.

Chicken Patty · Jul 13, 2010, 11:08 PM

Guys, I'm really having some issues with temps on the NB on my AMD rig, gonna shut her down for a few hours till I get it sorted out.

p_o_s_pc · Jul 13, 2010, 11:26 PM

I replaced the X2 4200+@3.1ghz with a X2 250@3.65ghz. nplan to get a board for the x2 4200 so i can get it crunching again

System Name:	Peenemunde/Salzburg/Osnabruck/Rostock/
Processor:	i7-860 @ 2.9GHz / i7-2700k @ 4.4GHz / i7-920 @ 3.83GHz / Core i3-2100
Motherboard:	Asus Maximus III Gene / Asus Maximus IV Gene / EVGA X58 SLI / Asus P8H77-I
Cooling:	Xigmatek Gaia / Xigmatek Gaia / Antec H2O-620 / Stock
Memory:	4x2GB G.SKILL / 2x4GB Crucial / 1x2GB Corsair / 2x4GB G.SKILL
Video Card:	Powercolor HD7930 / PNY GTX470 + nV GTX470 SLI / 3x MSI Radeon HD7770 GHz Edition / Sapphire HD7950
Hard Disk:	Western Digital 320GB / Western Digital 320GB / Western Digital 250GB / 320GB
Optical Drive:	None
CRT/LCD Model:	Asus VH242H (23.6")
Case:	None / NZXT Source 210 / NZXT Source 210 / Cooler Master Elite 120
Sound Card:	Onboard
PSU:	Antec TruePower New 650w / Antec TPN 650w / Antec Earthwatts 650w / Antec 430w
Software:	Windows 7 Professional x64

Jul 10, 2010, 03:27 PM	#9577
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.58/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	So I'm still working on the OC a bit guys, it was stable for like 4 hours yesterday and then BSOD, I assume because it didn't have enough voltage, so I'm trying a tad more and we'll see how it goes, think this outta do it thou. I have it set at 1.35V, should do the trick as my brother is rocking an overclock of 3.2Ghz on 1.4V on almost the same CPU as mine. __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming

System Name:	GLaDOS
Processor:	AMD Phenom II X6 1055T 2.8 ghz
Motherboard:	MSI 990FXA-GD65
Cooling:	Corsair H50
Memory:	Corsair DDR3 1333Mhz (2 x 4GB)
Video Card:	MSI R7970
Hard Disk:	2 WD Blue 500GBs, 1 WD 1TB
Optical Drive:	MSI 24X DVD-RW SATA DH-24AS
CRT/LCD Model:	2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case:	Corsair 600T White edition
Sound Card:	Onboard
PSU:	Corsair 850HX 850W
Software:	Microsoft Windows 7 Ultimate 64-bit

Jul 11, 2010, 12:06 PM	#9578
Radical_Edward Join Date: Jan 2010 Location: Oregon, USA Posts: 3,139 (2.58/day) Thanks: 2,559 Thanked 1,964 Times in 1,073 Posts System Specs	So the new voltage seems to be working, been stable all day yesterday and last night. Other than when we had a power outage. (One of those small ones where the power goes off and back on a few moments later.) __________________ My heatware My FS thread Solaris Utility DVD TacticalHandleGaming

System Name:	GLaDOS
Processor:	AMD Phenom II X6 1055T 2.8 ghz
Motherboard:	MSI 990FXA-GD65
Cooling:	Corsair H50
Memory:	Corsair DDR3 1333Mhz (2 x 4GB)
Video Card:	MSI R7970
Hard Disk:	2 WD Blue 500GBs, 1 WD 1TB
Optical Drive:	MSI 24X DVD-RW SATA DH-24AS
CRT/LCD Model:	2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case:	Corsair 600T White edition
Sound Card:	Onboard
PSU:	Corsair 850HX 850W
Software:	Microsoft Windows 7 Ultimate 64-bit

Jul 11, 2010, 02:10 PM	#9579
Soylent Joe Join Date: May 2009 Location: Brunswick, GA Posts: 3,033 (2.08/day) Thanks: 2,777 Thanked 676 Times in 460 Posts System Specs	Yeah so from around 11 am Friday to sometime this morning (Sunday) the little pavilion I have running upstairs produced a whopping 137 BOINC points. I'm pretty sure it's going to be worth it. Not to mention that it's always 90F up there. Even though I have my Ultra Kaze blowing onto the side of it, I'm surprised it hasn't overheated. __________________ Heatware SteamID

System Name:	Timucua 2.1
Processor:	i7-2700K
Motherboard:	Gigabyte Z68X-UD3H-B3
Cooling:	Corsair H100
Memory:	16GB G.Skill Ripshits X 1600MHz
Video Card:	Sapphire HD 5850 1GB
Hard Disk:	Kingston 128GB SSD + WD Black 640GB + 2x 1.5TB
Optical Drive:	LG DVD burner
CRT/LCD Model:	24" Acer G245HQ + 19" Lenovo L194
Case:	NZXT Switch 810 White
Sound Card:	Fox Magic
PSU:	Corsair TX750W
Software:	Windows 7: Electric Boogaloo

System Name:	Cruncher #1 & Main Rig
Processor:	Intel Core i7 2600K
Motherboard:	ASUS P8P67 B3
Cooling:	Prolimatech Megashadow
Memory:	G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR3 1600
Video Card:	HIS Radeon 6850
Hard Disk:	Super Talent GX2 64GB SSD (OS) // Seagate 500GB (Programs) // Seagate 1TB (Storage)
Optical Drive:	External Samsung Slim DVD Drive
CRT/LCD Model:	Toshiba 40" LED 1080P TV
Case:	NZXT Source 210 Elite (White)
Sound Card:	Soundblaster X-FI Xtreme Gamer Edition
PSU:	BFG Tech 1000W Modular
Software:	Windows 7 Ultimate 64 - Bit
Benchmarks:	Real man crunch for TPU! :)

System Name:	Starlifter // Dragonfly
Processor:	(lapped) i7 920 4GHz 1.3v // 1090T 3.6GHz 1.3v
Motherboard:	Asus Rampage III // Gigabyte GA-770T-USB3
Cooling:	(lapped) Corsair H70 // (lapped) TT Big Typhoon
Memory:	3x2GB DDR3 1600 10-10-10-30-128-1T 1.5v // 2x2GB DDR3 1333 9-9-9-24-1T 1.5v
Video Card:	HIS Radeon 5870 // BFG Maxcore 55 GTX260
Hard Disk:	Plextor M5S 128GB + 512GB OCZ Agility 4 + 2TB WD20EARS // WDC Black 500GB
Optical Drive:	SATA DVD-RW // IDE CD-RW
CRT/LCD Model:	Dell/Alienware AW2310 + 19" HDTV // 19" HDTV
Case:	Antec SOHO 1030B // some really old white case... but it's decent
Sound Card:	Creative X-Fi Fatality Professional // onboard (disabled)
PSU:	Antec NeoHe 550W // Corsair CX600w
Software:	Windows 7 Home Premium x64 // Windows 7 Home Premium x64
Benchmarks:	zunn zunnzunn zunn zunn

System Name:	The work PC / cruncher 1 & 2
Processor:	i7-920 /2 X W3670 4.1 GHz (1.28 & 1.3V)
Motherboard:	Gigabyte GA-X58A-UD5/UD7/UD5
Cooling:	Noctua NH-D14/Noctua NH-D14/WC
Memory:	6 GB Mushkin /Same/Same
Video Card:	7950 (1100 Mhz) / 2 x 7970 (1045) / 2 x 7770 (1102)
Hard Disk:	500 GB HD / 500 GB HD /2 TB BC
CRT/LCD Model:	Dell UltraSharp 2408WFP
Case:	Fractel R4 / none /Corsair 800D
PSU:	Enermax 87+ 500 W/ 700 W /600 W
Software:	WIN7 64 bit

Jul 11, 2010, 06:47 PM	#9583
Soylent Joe Join Date: May 2009 Location: Brunswick, GA Posts: 3,033 (2.08/day) Thanks: 2,777 Thanked 676 Times in 460 Posts System Specs	I was just looking at the device statistics in My Grid. I'll take a look at it after it updates again though. It ran for about 48 hours and is only showing 3 hours runtime (even though it updated and got the information from it this morning). __________________ Heatware SteamID

Jul 12, 2010, 04:39 AM	#9584
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	an FYI X6 had some downtime today, like four hours total. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jul 12, 2010, 08:31 PM	#9585
ERazer Join Date: Oct 2009 Location: Republic of Texas Posts: 1,421 (1.07/day) Thanks: 334 Thanked 500 Times in 337 Posts System Specs	16 thread up and running again btw hows amd x6 core @ crunching any good? thinking getting one __________________ Gaming Rig: i7 2600k \| ASUS Maximus IV Gene-Z Intel Z68 \| 8gb Corsair Dominator GT \| ASUS ENGTX580 DCII \| Intel 510 series 120gb \| Corsair 650d Daily Rig: i7 860 \| GA-P55A-UD6 \| 8gb Corsair Dominator III \| HD5770 \| x2 250gb WD RE4 Raid0 \| Haf932 Modded *Server: i3 540 \| GA-H55N-USB3 \| 4gb Corsair XMS DDR3 \| x4 500gb WD Blue \| lian li pc-q08b \| My HeatWare \| My For Sale \| SteamID \|

System Name:	Resurrection
Processor:	i7 2600k 4.6ghz
Motherboard:	ASUS Maximus IV Gene-Z Intel Z68
Cooling:	EK Supreme HF, EK Bay Spin Reservoir, Bitspower Compression Fittings, MCP 350, Fesser Tubing
Memory:	8 gig Corsair Dominator GT III 1866 (CAS 9)
Video Card:	asus 580 direct cu II
Hard Disk:	Intel 510 series 120gb
Optical Drive:	Steam FTW!!! who needs Cd's
CRT/LCD Model:	ViewSonic 24 LCD HD VX2439wm
Case:	650D
Sound Card:	on board X-Fi
PSU:	Corsair Memory AX850
Software:	Window 7 x64 Pro
Benchmarks:	X Armor u9bl Mechanical Keyboard "Cherry MX Brown" and SteelSeries Ikari Gaming Mouse

Jul 12, 2010, 08:50 PM	#9586
hat Maximum Overclocker Join Date: Nov 2006 Location: Ohio Posts: 12,236 (5.14/day) Thanks: 2,054 Thanked 2,039 Times in 1,549 Posts System Specs	I'm trying to get my Athlon XP 2200+ running again, but I need a wireless card for it. I bought one but it's taking forever to get here... __________________ My Heatware “Inb4 smartphone LN2 overclocking.” -radrok

Jul 13, 2010, 05:35 AM	#9590
ERazer Join Date: Oct 2009 Location: Republic of Texas Posts: 1,421 (1.07/day) Thanks: 334 Thanked 500 Times in 337 Posts System Specs	talk about stress running wcg and milkyway ATI really pushing my h20 cooling __________________ Gaming Rig: i7 2600k \| ASUS Maximus IV Gene-Z Intel Z68 \| 8gb Corsair Dominator GT \| ASUS ENGTX580 DCII \| Intel 510 series 120gb \| Corsair 650d Daily Rig: i7 860 \| GA-P55A-UD6 \| 8gb Corsair Dominator III \| HD5770 \| x2 250gb WD RE4 Raid0 \| Haf932 Modded *Server: i3 540 \| GA-H55N-USB3 \| 4gb Corsair XMS DDR3 \| x4 500gb WD Blue \| lian li pc-q08b \| My HeatWare \| My For Sale \| SteamID \|

Jul 13, 2010, 05:36 AM	#9591
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	Crunching or folding, even if my loop took a beating, it'll make me proud __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jul 13, 2010, 05:40 AM	#9592
ERazer Join Date: Oct 2009 Location: Republic of Texas Posts: 1,421 (1.07/day) Thanks: 334 Thanked 500 Times in 337 Posts System Specs	love my gentle typhoon running pull blast and still silent might add 2nd loop __________________ Gaming Rig: i7 2600k \| ASUS Maximus IV Gene-Z Intel Z68 \| 8gb Corsair Dominator GT \| ASUS ENGTX580 DCII \| Intel 510 series 120gb \| Corsair 650d Daily Rig: i7 860 \| GA-P55A-UD6 \| 8gb Corsair Dominator III \| HD5770 \| x2 250gb WD RE4 Raid0 \| Haf932 Modded *Server: i3 540 \| GA-H55N-USB3 \| 4gb Corsair XMS DDR3 \| x4 500gb WD Blue \| lian li pc-q08b \| My HeatWare \| My For Sale \| SteamID \|

Jul 13, 2010, 09:53 PM	#9596
ERazer Join Date: Oct 2009 Location: Republic of Texas Posts: 1,421 (1.07/day) Thanks: 334 Thanked 500 Times in 337 Posts System Specs	hmm is server down? got 10 WU back log __________________ Gaming Rig: i7 2600k \| ASUS Maximus IV Gene-Z Intel Z68 \| 8gb Corsair Dominator GT \| ASUS ENGTX580 DCII \| Intel 510 series 120gb \| Corsair 650d Daily Rig: i7 860 \| GA-P55A-UD6 \| 8gb Corsair Dominator III \| HD5770 \| x2 250gb WD RE4 Raid0 \| Haf932 Modded *Server: i3 540 \| GA-H55N-USB3 \| 4gb Corsair XMS DDR3 \| x4 500gb WD Blue \| lian li pc-q08b \| My HeatWare \| My For Sale \| SteamID \|

Jul 13, 2010, 09:54 PM	#9597
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	anyone else having problems with uploading/downloading work? __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

System Name:	el'lappy\|Cruncher \| Cruncher 2
Processor:	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard:	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling:	dual 80mm cooling fan \| Xiggy S1283 (WC'ing OTW) \|cheapo
Memory:	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card:	onboard \| Asus DirectCU GTX460 1GB(+GTX 465 STB) \|8800GTS
Hard Disk:	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Optical Drive:	DVD-RW \| None (STB blu-ray player,maybe) \|DVD-RW Lightscribe
CRT/LCD Model:	17in \| 40" 1080P HD TV
Case:	lappy case \| open air ATM (STB CM HAF XB) \|none yet
Sound Card:	onboard \| onboard \| onboard
PSU:	Dell powerbrick with Acer end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software:	Windows 7 Ult. 64bit---->------->

Jul 13, 2010, 09:59 PM	#9598
mjkmike Join Date: Feb 2010 Location: Alberta,Canada Posts: 1,481 (1.24/day) Thanks: 2,691 Thanked 3,750 Times in 981 Posts System Specs	server has been down for me for about four hours now. __________________ Has anyone seen a thieving gremlin? Seriously, it comes in the night and steals my OC stability. Kiex

Processor:	just a few i7's all AMD's gone to friends
Motherboard:	Mother F%#@& am I board
Cooling:	It's called Alberta Canada.
Memory:	Don't remember.
Video Card:	Hope for blckjack
Hard Disk:	hurt my toe's when droped
Optical Drive:	need new glasses
CRT/LCD Model:	never big enough
Case:	I think they call it a lost case
Sound Card:	What speek up I'm old.
PSU:	Good old coffee
Software:	when you get this old everything is soft
Benchmarks:	Always on the bench never on the field.

Jul 13, 2010, 11:08 PM	#9599
Chicken Patty WCG Team Captain Join Date: Nov 2007 Location: Miami, Florida Posts: 23,896 (11.91/day) Thanks: 15,156 Thanked 12,315 Times in 7,779 Posts System Specs	Guys, I'm really having some issues with temps on the NB on my AMD rig, gonna shut her down for a few hours till I get it sorted out. __________________ Help save lives, CRUNCH and/or FOLD for Team TPU and make a difference! Crunching with a 2600K, i7-950, FX-8120, Radeon 6850 (2 WU's), Radeon 7770 (4 WU's) *"AlienIsGOD - Awe!!! CP has grown from a small chicken nugget to the IMMENSE PATTY and WCG Team leader he is today"*

Jul 13, 2010, 11:26 PM	#9600
p_o_s_pc F@H&WCG addict Join Date: May 2007 Location: Newark ohio Posts: 9,916 (4.48/day) Thanks: 3,158 Thanked 2,215 Times in 1,685 Posts System Specs	I replaced the X2 4200+@3.1ghz with a X2 250@3.65ghz. nplan to get a board for the x2 4200 so i can get it crunching again __________________ crunching for TPU on 30 CPU Threads + 688 Cuda cores More to come

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TPU's F@H Team	W2hCYK	Folding@Home	16543	May 26, 2013 03:34 AM
Team launches Triple Channel Xtreem DDR3, Triple Bandwidth, X-Triple Speed	btarunr	News	4	Dec 8, 2008 06:55 AM
Team Launches Brand New Elite DDR3 Series	alexp999	News	4	Nov 1, 2008 07:48 PM
Team Fortress 2 Goldrush Update out!	wiak	Games	9	May 23, 2008 06:48 PM
Team Fortress 2 Megathread!	ktr	Games	16	Jan 11, 2008 01:28 AM